mtd: pxa3xx_nand: introduce common timing to reduce
Subsystems (2)
PATCH 1/1 mtd: pxa3xx_nand: introduce common timing to reduce
read id times
We certainly don't need to send read id command times by times, since we already know what the id is after the first read id...
So create a common timing which could ensure it would successfully read id out all supported chip. Then follow the build-in table to reconfigure the timing.
--- drivers/mtd/nand/pxa3xx_nand.c | 33 +++++++++++++++++---------------- 1 files changed, 17 insertions(+), 16 deletions(-)
drivers/mtd/nand/pxa3xx_nand.c +6 -0
@@ -225,7 +225,13 @@ const static struct pxa3xx_nand_cmdset cmdset = { .lock_status = 0x007A, }; +/** +* The timing defined in the builtin_flash_types[0] +* could be considered as the common timing which is used to +* detect the chip id before we know how to optimize further +*/ static struct pxa3xx_nand_flash __devinitdata builtin_flash_types[] = { +{0 ,0 ,0 ,0 ,0 ,0 , {40 ,80 ,60 ,100 ,80 ,100 ,90000 ,400 ,40 , }, }, {0x46ec ,32 ,512 ,16 ,16 ,4096 , {10 ,0 ,20 ,40 ,30 ,40 ,11123 ,110 ,10 , }, }, {0xdaec ,64 ,2048 ,8 ,8 ,2048 , {10 ,0 ,20 ,40 ,30 ,40 ,11123 ,110 ,10 , }, }, {0xd7ec ,128 ,4096 ,8 ,8 ,8192 , {10 ,0 ,20 ,40 ,30 ,40 ,11123 ,110 ,10 , }, },
@@ -850,12 +856,6 @@ static int pxa3xx_nand_config_flash(struct
pxa3xx_nand_info *info,
struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data; uint32_t ndcr = 0x00000FFF; /* disable all interrupts */
- if (f->page_size != 2048 && f->page_size != 512)
- return -EINVAL;
-
- if (f->flash_width != 16 && f->flash_width != 8)
- return -EINVAL;
-
/* calculate flash information */ info->oob_size = (f->page_size == 2048) ? 64 : 16; info->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
@@ -967,23 +967,24 @@ static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info,
if (pxa3xx_nand_detect_config(info) == 0)
return 0;
- for (i = 0; i < ARRAY_SIZE(builtin_flash_types); i++) {
+ f = &builtin_flash_types[0];
+ pxa3xx_nand_config_flash(info, f);
+ if (__readid(info, &id))
+ goto fail_detect;
+ for (i = 1; i < ARRAY_SIZE(builtin_flash_types); i++) {
f = &builtin_flash_types[i];
-
- if (pxa3xx_nand_config_flash(info, f))
- continue;
-
- if (__readid(info, &id))
- continue;
-
- if (id == f->chip_id)
+ if (f->chip_id == id) {
+ dev_info(&info->pdev->dev, "detect chip id: 0x%x\n", id);
+ pxa3xx_nand_config_flash(info, f);
return 0;
+ }
}
dev_warn(&info->pdev->dev,
- "failed to detect configured nand flash; found %04x instead of\n",
+ "failed to detect configured nand flash; found %04x instead of\n",
id);
+fail_detect:
return -ENODEV;
}
Signature · 1 line
1.5.6.5