mpc83xx: mpc8313 - handle erratum IPIC1 (TSEC IRQ number swappage)
PATCH 1/1 mpc83xx: mpc8313 - handle erratum IPIC1 (TSEC IRQ number swappage)
mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1 h/w (see AN3545). The base device tree in use has rev. 1 ID numbers, so if on Rev. 2 (and higher) h/w, we fix them up here.
Signed-off-by Kim Phillips <[email protected]>
--- cpu/mpc83xx/fdt.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 files changed, 39 insertions(+), 0 deletions(-)
cpu/mpc83xx/fdt.c +39 -0
@@ -69,6 +69,45 @@ void ft_cpu_setup(void *blob, bd_t *bd)defined (CONFIG_HAS_ETH2 ) ||defined (CONFIG_HAS_ETH3 ) ||\ defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)fdt_fixup_ethernet (blob); +#ifdef CONFIG_MPC8313 +/* +* mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1 +* h/w (see AN3545). The base device tree in use has rev. 1 ID numbers, +* so if on Rev. 2 (and higher) h/w, we fix them up here +*/ +if (REVID_MAJOR (immr->sysconf.spridr) >=2 ) { +int nodeoffset, path; +const char *prop; + + nodeoffset =fdt_path_offset (blob,"/aliases" ); +if (nodeoffset >=0 ) { +#if defined(CONFIG_HAS_ETH0 ) + prop =fdt_getprop (blob, nodeoffset,"ethernet0" ,NULL ); +if (prop) { +u32 tmp[] = {32 ,0x8 ,33 ,0x8 ,34 ,0x8 }; + + path =fdt_path_offset (blob, prop); + prop =fdt_getprop (blob, path,"interrupts" ,0 ); +if (prop) +fdt_setprop (blob, path,"interrupts" , + &tmp,sizeof (tmp)); + } +#endif +#if defined(CONFIG_HAS_ETH1 ) + prop =fdt_getprop (blob, nodeoffset,"ethernet1" ,NULL ); +if (prop) { +u32 tmp[] = {35 ,0x8 ,36 ,0x8 ,37 ,0x8 }; + + path =fdt_path_offset (blob, prop); + prop =fdt_getprop (blob, path,"interrupts" ,0 ); +if (prop) +fdt_setprop (blob, path,"interrupts" , + &tmp,sizeof (tmp)); + } +#endif + } + } +#endif #endif do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
Signature · 1 line
1.6.4.4