qong: changes to Dave/DENX Qong configuration
PATCH 1/1 qong: changes to Dave/DENX Qong configuration
1. Changes to the default environment:
- "bootcmd" defined as "run flash_self"
- "saveenv" command removed from "update"
- "uboot" changed to "u-boot" (also in "load")
- "addmtd" variable defined (and added to all boot commands)
2. CONFIG_CMD_JFFS2 defined to enable "mtdparts" command
3. MTDIDS_DEFAULT and MTDPARTS_DEFAULT defined
4. CONFIG_SYS_CBSIZE changed from 256 to 512. That solves the problem with truncated "bootargs" environment variable.
Signed-off-by Ilya Yanok <[email protected]>
--- include/configs/qong.h | 22 ++++++++++++++-------- 1 files changed, 14 insertions(+), 8 deletions(-)
include/configs/qong.h +14 -8
@@ -84,6 +84,7 @@#define CONFIG_CMD_DHCP #define CONFIG_CMD_NET #define CONFIG_CMD_MII +#define CONFIG_CMD_JFFS2 /* * You can compile in a MAC address and your custom net settings by using
@@ -113,28 +114,29 @@":${hostname}:${netdev}:off panic=1\0" \"addtty=setenv bootargs ${bootargs}" \" console=ttymxc0,${baudrate}\0" \ +"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \"addmisc=setenv bootargs ${bootargs}\0" \"uboot_addr=a0000000\0" \"kernel_addr=a0080000\0" \"ramdisk_addr=a0300000\0" \ -"uboot=qong/u-boot.bin\0" \ +"u-boot=qong/u-boot.bin\0" \"kernel_addr_r=80800000\0" \"hostname=qong\0" \"bootfile=qong/uImage\0" \"rootpath=/opt/eldk-4.2-arm/armVFP\0" \ -"flash_self=run ramargs addip addtty addmisc;" \ +"flash_self=run ramargs addip addtty addmtd addmisc;" \"bootm ${kernel_addr} ${ramdisk_addr}\0" \ -"flash_nfs=run nfsargs addip addtty addmisc;" \ +"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \"bootm ${kernel_addr}\0" \"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ -"run nfsargs addip addtty addmisc;" \ +"run nfsargs addip addtty addmtd addmisc;" \"bootm\0" \ -"load=tftp ${loadaddr} ${uboot}\0" \ +"bootcmd=run flash_self\0" \ +"load=tftp ${loadaddr} ${u-boot}\0" \ "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \" +${filesize};cp.b ${fileaddr} " \ - xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize};" \ -"setenv filesize;saveenv\0" \ + xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \"upd=run load update\0" \/*
@@ -142,7 +144,7 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "=> " -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -211,5 +213,9 @@* JFFS2 partitions */ #define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=physmap-flash.0" +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:256k(U-Boot),128k(env1)," \ + "128k(env2),2560k(kernel),13m(ramdisk),-(user)"#endif /* __CONFIG_H */
Signature · 12 lines
1.6.0.6 Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de In C we had to code our own bugs, in C++ we can inherit them.