Skip to contentSkip to conversation

mfd: rename 88pm8607 to 88pm860x in mfd

PATCH New Haojian Zhuang 1 participant 1 message Nov 9, 2009 Multifunction devices (MFD)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mfd: rename 88pm8607 to 88pm860x in mfd

Rename 88PM8607 to 88PM860X in both Makefile and Kconfig under mfd directory.

---
 drivers/mfd/Kconfig  |   12 ++++++------
 drivers/mfd/Makefile |    2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)
drivers/mfd/Kconfig +6 -6
index fbe684b..62b7aae 100644
@@ -305,14 +305,14 @@ config EZX_PCAP
 	  This enables the PCAP ASIC present on EZX Phones. This is
 	  needed for MMC, TouchScreen, Sound, USB, etc..
 
-config MFD_88PM8607
-	bool "Support Marvell 88PM8607"
-	depends on I2C
+config MFD_88PM860X
+	bool "Support Marvell 88PM8606/88PM8607"
+	depends on I2C=y
 	select MFD_CORE
 	help
-	  This supports for Marvell 88PM8607 Power Management IC. This includes
-	  the I2C driver and the core APIs _only_, you have to select
-	  individual components like voltage regulators, RTC and
+	  This supports for Marvell 88PM8606/88PM8607 Power Management IC.
+	  This includes the I2C driver and the core APIs _only_, you have to
+	  select individual components like voltage regulators, RTC and
 	  battery-charger under the corresponding menus.
 
 endmenu
drivers/mfd/Makefile +1 -1
index bb000a0..a2c08ce 100644
@@ -50,4 +50,4 @@ obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
 obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
-obj-$(CONFIG_MFD_88PM8607)	+= 88pm860x-core.o 88pm860x-i2c.o
+obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x-core.o 88pm860x-i2c.o
Signature · 1 line
1.5.6.5