davinci: Add MMC/SD support for DA830/OMAP-L137 EVM
Subsystems (3)
PATCH 16/46 davinci: Add MMC/SD support for DA830/OMAP-L137 EVM
Add pinmux settings, etc. to enable the MMC/SC hardware.
Signed-off-by David A. Griego <[email protected]>
Signed-off-by Mark A. Greer <[email protected]>
Signed-off-by Kevin Hilman <[email protected]>
--- arch/arm/mach-davinci/board-da830-evm.c | 41 +++++++++++++++++++++++++++++++ 1 files changed, 41 insertions(+), 0 deletions(-)
arch/arm/mach-davinci/board-da830-evm.c +41 -0
@@ -23,6 +23,7 @@#include <mach/irqs.h> #include <mach/cp_intc.h> #include <mach/mux.h> +#include <mach/gpio.h> #include <mach/da8xx.h> #include <mach/asp.h>
@@ -83,6 +84,30 @@ static struct snd_platform_data da830_evm_snd_data = { .rxnumevt = 1, }; +/* +* GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS. +*/ +static const short da830_evm_mmc_sd_pins[] = { +DA830_MMCSD_DAT_0 ,DA830_MMCSD_DAT_1 ,DA830_MMCSD_DAT_2 , +DA830_MMCSD_DAT_3 ,DA830_MMCSD_DAT_4 ,DA830_MMCSD_DAT_5 , +DA830_MMCSD_DAT_6 ,DA830_MMCSD_DAT_7 ,DA830_MMCSD_CLK , +DA830_MMCSD_CMD ,DA830_GPIO2_1 ,DA830_GPIO2_2 , +-1 +}; + +#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) + +static int da830_evm_mmc_get_ro (int index) +{ +return gpio_get_value (DA830_MMCSD_WP_PIN ); +} + +static struct davinci_mmc_config da830_evm_mmc_config = { + .get_ro = da830_evm_mmc_get_ro, + .wires =4 , + .version =MMC_CTLR_VERSION_2 , +}; +static __init void da830_evm_init (void ) {struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -132,6 +157,22 @@ static __init void da830_evm_init(void) ret);da8xx_register_mcasp (1 , &da830_evm_snd_data); + + ret =da8xx_pinmux_setup (da830_evm_mmc_sd_pins); +if (ret) +pr_warning ("da830_evm_init: mmc/sd mux setup failed: %d\n" , + ret); + + ret =gpio_request (DA830_MMCSD_WP_PIN ,"MMC WP" ); +if (ret) +pr_warning ("da830_evm_init: can not open GPIO %d\n" , +DA830_MMCSD_WP_PIN ); +gpio_direction_input (DA830_MMCSD_WP_PIN ); + + ret =da8xx_register_mmcsd0 (&da830_evm_mmc_config); +if (ret) +pr_warning ("da830_evm_init: mmc/sd registration failed: %d\n" , + ret); }#ifdef CONFIG_SERIAL_8250_CONSOLE
Signature · 1 line
1.6.4.3