Skip to contentSkip to conversation

Multiple Internet Interfaces

LARTC David 2 participants 2 messages Oct 1, 2001

lore
Share & tools
lore

David

author
#0 lore raw

Here is the setup I have. I have 3 network cards in my linux machine. 1 network card (eth0) goes to my internet network (192.168.0.0). Network Card 2 (eth1) and Network Card 3(eth2) go to the internet via 2 cable modems whose address is determined by dhcp. I can get either cable modem to work alone but I can't get them to work together. I would really like to be able to combine the 2 into 1 and have it detect a bad link as well in case i have to unplug 1 cable modem.

Thanks!
David
[email protected]

#1 lore raw

As far as I know, the cable modems each share the same bandwidth. They would also share the same subnet, so if one link goes down, wouldn't they both be down? I can't see using more than 1 modem for each coaxial line.

Chris.

Quoted 11 lines · David

Here is the setup I have. I have 3 network cards in my linux machine. 1 network card (eth0) goes to my internet network (192.168.0.0). Network Card 2 (eth1) and Network Card 3(eth2) go to the internet via 2 cable modems whose address is determined by dhcp. I can get either cable modem to work alone but I can't get them to work together. I would really like to be able to combine the 2 into 1 and have it detect a bad link as well in case i have to unplug 1 cable modem.

Thanks!

David
[email protected]