bounded doesn't work
Hello i have this setup, and the class of 80kbit
(bounded) doesn't work:
tc class add dev eth0 parent 10:1 classid 10:100 cbq bandwidth 100Mbit rate 80kbit allot 1514 weight 8Kbit prio 5 maxburst 12 avpkt 1000 bounded tc class add dev eth0 parent 10:100 classid 10:101 cbq bandwidth 100Mbit \
rate 40kbit allot 1514 weight 4Kbit prio 4 maxburst 6 avpkt 1000 borrow bounded
tc class add dev eth0 parent 10:100 classid 10:102 cbq bandwidth 100Mbit \
rate 40kbit allot 1514 weight 4Kbit prio 5 maxburst 6 avpkt 1000 borrow bounded
tc class add dev eth0 parent 10:100 classid 10:103 cbq bandwidth 100Mbit \
rate 40kbit allot 1514 weight 4Kbit prio 5 maxburst 6 avpkt 1000 borrow bounded
tc qdisc add dev eth0 parent 10:100 sfq quantum 1514b perturb 15 tc qdisc add dev eth0 parent 10:101 sfq quantum 1514b perturb 15 tc qdisc add dev eth0 parent 10:102 sfq quantum 1514b perturb 15 tc qdisc add dev eth0 parent 10:103 sfq quantum 1514b perturb 15
tc filter add dev eth0 parent 10:0 protocol ip prio 25 u32 match ip dst 192.168.1.2/32 flowid 10:101 tc filter add dev eth0 parent 10:0 protocol ip prio 25 u32 match ip dst 192.168.1.3/32 flowid 10:102 tc filter add dev eth0 parent 10:0 protocol ip prio 25 u32 match ip dst 192.168.1.4/32 flowid 10:103
what is the problem?
I want to limit the class 10:100 to only 80kbit but when all curstomers (3) download at the same time (40 kbit) it the 10:100 class exceed 80kbit.
In this example i put only 3 customer but i think to put 10, each customer bounded at 40 kbit.
Regards
Fabian
Signature · 8 lines
Saludos, Fabian Gervan _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/