i need some help
i have a linux router with 2 if , i tried many method to manage the traffic, but nothing worked.
internet --- eth0 --------- eth1 ---- LAN
| router |
| |
---------internet: 4Mbit half duplex
router: simple ip forwarding , no MASQ
i would like to segment the traffic to UDP 400kbit , TCP 3.5Mbit , ICMP 100kbit.
thx
Peter Debreczeni
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/