Skip to contentSkip to conversation

Ok, a simple one then..

LARTC Paul Wisen 2 participants 2 messages Dec 8, 2001

lore
Share & tools
lore

Paul Wisen

author
#0 lore raw

Hi, and thanks a _lot_ for the answers.
Got some question first i need to ask though, before I can try that out.

Quoted 6 lines
Quoted 4 lines

I want to have one "mother" class that gets all traffic in our network. So I define cbq-0010.mother
with RULE=:,192.0.0.0/24

You are using cbq.init.

ehrm.. did I forgot to tell you that ? :)

Quoted 10 lines

# LEAF=none|tbf optional, default "tbf"
#
# Instructs the script to attach leaf queueing discipline
to CBQ class.
# By default, TBF is used. This parameter is useful for
parent classes
# where you probably want to specify LEAF=none. In future
it might be
# possible to use SFQ or CBQ (or other) as leaf qdisc.

Quoted 2 lines

You might want to specify that. But it might be that you are exceeding the limits of cbq.init.

But, if I set LEAF=none, the mother class will not do any Fair Quing.. And, that's what I want. Exept that protocols like ssh and such should always come through first.

Quoted 3 lines

What you basically need is to get your second class to have a filter that comes *first*, before the filter directing all everything to cbq-0010!

Agree, the question is how do I do that..
I've been playing around with different names on the classes, different classid's and so on, trying to figure out how I control what class will come first. Now, Maybe the PRIO is the thing that sets that, but then, why didn't it work then, ssh got prio 1 in my configuration..

Quoted 7 lines
Quoted 1 line

Ofcourse the first rule says that it should but, what if

there'se some other

Quoted 1 line

class that also would have triggerd on the packet ? How do I

control witch

Quoted 1 line

class gets what packet, if therese multiple true rules.. ??

You can also set cbq.init to write out what it will do.

how ??

Quoted 4 lines

Then you can change
the priority of filters, making sure that the more specific rules get tested first.

I will try that again then.

/ Paul

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#1 lore raw
Quoted 1 line · Paul Wisen

Hi, and thanks a _lot_ for the answers.

No problem. These answers are found by google - a lot. Think of answering these questions as being an audience for the internet.

Quoted 1 line
Quoted 1 line

# LEAF=none|tbf optional, default "tbf"

(...)

Quoted 6 lines
Quoted 2 lines

You might want to specify that. But it might be that you are exceeding the limits of cbq.init.

But, if I set LEAF=none, the mother class will not do any Fair Quing.. And, that's what I want. Exept that protocols like ssh and such should always come through first.

Ok. That's often the most important part, precisely specifying what you want.

Quoted 10 lines
Quoted 2 lines

What you basically need is to get your second class to have a filter that comes *first*, before the filter directing all everything to cbq-0010!

Agree, the question is how do I do that..

Quoted 3 lines
Quoted 1 line

class gets what packet, if therese multiple true rules.. ??

You can also set cbq.init to write out what it will do.

how ??

Edit the script and change this line:
### Uncomment for debugging
#LOG_FILE="/var/run/cbq-$1"

Then it should be easy to see what is happening, or to change it.

Also, look at HTB, it is very well suited for what you try to achieve.

Regards,

bert

Signature · 8 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
Trilab                                 The Technology People
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/