Skip to contentSkip to conversation

peak

LARTC pepe 2 participants 2 messages Dec 11, 2001

lore
Share & tools
lore

pepe

author
#0 lore raw

I have an implemented traffic control with tc+cbq..,classes for every ip,etc... it woks very good; But now i wanna know how can i assign the peaks of traficc to any class ? . My clients (internet clients) work very fine with the assigned bandwidth, but now i wanna implement peaks of max bandwidth for all. How can i make this ?

I have a 2Mbps internet connection , and my clients have a wireless connection (of 2Mbps) to me, but i assigned only 256kbps per client. I wanna assign to my clients 256kbps with peaks of 2Mbps, How can i make that.

Jose Gisbert
www.yupinet.com.ar

#1 lore raw
Quoted 6 lines · pepe

I have an implemented traffic control with tc+cbq..,classes for every ip,etc... it woks very good; But now i wanna know how can i assign the peaks of traficc to any class ? . My clients (internet clients) work very fine with the assigned bandwidth, but now i wanna implement peaks of max bandwidth for all. How can i make this ?

I have a 2Mbps internet connection , and my clients have a wireless connection (of 2Mbps) to me, but i assigned only 256kbps per client. I wanna assign to my clients 256kbps with peaks of 2Mbps, How can i make that.

You probably have TBF sitting inside your CBQ. Remove it and it should work. Otherwise, please show your entire CBQ configuration.

Generally there is NO NEED for a TBF within a CBQ!

Regards,

bert

Signature · 8 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
Trilab                                 The Technology People
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/