limiting bandwidth to one IP
Hi,
I am testing tc and company tools :-)
I have an ADSL with three interfaces (one to ADSL router, one to one net and another one to another net).
I am trying to limit the download from Internet to one computer.
I try it (and some variations...):
tc qdisc add dev eth1 root handle 1: cbq bandwidth 256kbit allot 1514 cell 8 avpkt 1000 mpu 64
(eth1 is the interface where computer that I want to limit is connected)
tc class add dev eth1 parent 1:0 classid 1:1 cbq bandwidth 256kbit rate 128kbit weight 12kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded
256 is my bandwidth (to download)
128 is the bandwidth that I want to this computer
12kbit I don't know ¿?...
bounded is to test, only
tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.0.5 flowid 1:1
But the computer is receiving more than 128kbit.
If I try:
tc qdisc add dev eth1 root tbf rate 128kbit latency 50ms burst 1540
Works fine, but I am limiting the whole network (I don't want it)
thank you very much for your attention.
And excuse me my bad English.
----
Carles Pina i Estany | Nick: Pinux / Pine / Teufeus
E-Mail: [email protected] / [email protected] / [email protected]
http://www.salleURL.edu/~is08139/
Vendo teléfono militar. También marca el paso
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 7 lines · Carles Pina i Estany
Hi,
I am testing tc and company tools :-)
I have an ADSL with three interfaces (one to ADSL router, one to one net and another one to another net).
Quoted 6 lines
I am trying to limit the download from Internet to one computer.
I try it (and some variations...):
tc qdisc add dev eth1 root handle 1: cbq bandwidth 256kbit allot 1514 cell 8 avpkt 1000 mpu 64
Bandwith must be the real bandwith of the NIC. Usual 10 or 100 mbit.
Quoted 11 lines
(eth1 is the interface where computer that I want to limit is connected)
tc class add dev eth1 parent 1:0 classid 1:1 cbq bandwidth 256kbit rate 128kbit weight 12kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded
256 is my bandwidth (to download)
128 is the bandwidth that I want to this computer
12kbit I don't know ¿?...
bounded is to test, only
Quoted 8 lines
tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.0.5 flowid 1:1
But the computer is receiving more than 128kbit.
If I try:tc qdisc add dev eth1 root tbf rate 128kbit latency 50ms burst 1540 Works fine, but I am limiting the whole network (I don't want it)
What you want to do is easy. But you are using the wrong commands. I have some working scripts. You can find them on www.docum.org.
But I advise you to use the htb qdisc. Much easier to set up and to understand. Again, more information on www.docum.org. If you really want to use CBQ, I can give you more information. Just leave a message on the mailing list.
Stef
Signature · 8 lines
[email protected] More QOS info : http://www.docum.org/ Title : "Using Linux as bandwidth manager" _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 37 lines
Quoted 1 line
Bandwith must be the real bandwith of the NIC. Usual 10 or 100 mbit.
ok
Quoted 2 lines
What you want to do is easy. But you are using the wrong commands. I have some working scripts. You can find them on www.docum.org.
Ok, I have looked now...
Quoted 4 lines
But I advise you to use the htb qdisc. Much easier to set up and to understand. Again, more information on www.docum.org. If you really want to use CBQ, I can give you more information. Just leave a message on the mailing list.
I have seen htb qdisc. But I see that it isn't in standard Kernel. I would use standard kernel because (for various reasons). If I have time I will test htb qdisc.
Now my script works (with the help of your webpage):
DEV="dev eth1"
OPTION="allot 1514 maxburst 20 avpkt 1000 prio 3"
tc qdisc add $DEV root handle 10: cbq bandwidth 10mbit avpkt 1000 tc class add $DEV parent 10:0 classid 10:2 cbq bandwidth 10mbit rate \
$2kbit $OPTION boundedtc filter add dev eth1 parent 10: protocol ip prio 1 u32 match ip \
dst 192.168.0.5 flowid 10:2But now I would like limit the bandwidth that 192.168.0.5 is sending.
I cannot change dst for src, I think, because I am doing NAT and I think that when the paquet traverse "tc filter bla bla bla" has IP of the firewall machine. Then I have to do with iptables and mangle table? But this table only has PREROUTING and OUTPUT:
Quoted 6 lines
cpie:~/tc# iptables -L -t mangle | grep Chain Chain PREROUTING (policy ACCEPT) Chain OUTPUT (policy ACCEPT)I suppose that I can mark paquets in PREROUTING Chain before the IP is masqueraded. I will test.
Indeed. You can not use the u32 filter but you will need the fw filter in conjuction with iptables if you do SNAT.
Quoted 2 lines
Thank you very much for your attention.
You can makt it easier to understand for us if you (try) to draw a small ASCII picture of your setup.
Stef
Signature · 8 lines
[email protected] More QOS info : http://www.docum.org/ Title : "Using Linux as bandwidth manager" _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 3 lines
I am testing tc and company tools :-)
I am trying to limit the download from Internet to one computer.
you might be interested by my bytelimit patch, so I'll do some more advertistement for it ... :-)
it is a netfilter (iptables) match allowing to do traffic shaping, like the "limit" match but in bytes/second instead of packets/second. it's as simple as :
iptables -A FORWARD -d 192.168.23.45 -m bytelimit --rate 10000 -j DROP this will limit 192.168.23.45 to 10000 bytes/second . every packet "out of quota" will be dropped.
the patch is at http://etudiant.univ-mlv.fr/~jpetazzo/bytelimit.tgz
feel free to contact me for more info/help about the patch.
Jerome Petazzoni <skaya at enix dot org>
--
Whoever had created humanity had left in a major design flaw. It was its tendency to bend at the knees.
(Feet of Clay)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/