Skip to contentSkip to conversation

arp problem

LARTC Sanjeev Lakshmanan 2 participants 2 messages Dec 25, 2001

lore
Share & tools
lore
#0 lore raw

Hi all

I used tcpdump on my network whch has pt-pt eth
connections.

I noticed that arp requests are not being replied to. Even after I manually added neighbours using "ip neigh add...) the destination eth interface is not replying to arp requests.

What could be the problem?

Regards,
Sanjeev.

__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#1 lore raw
Quoted 9 lines · Sanjeev Lakshmanan

Hi all

I used tcpdump on my network whch has pt-pt eth
connections.

I noticed that arp requests are not being replied to. Even after I manually added neighbours using "ip neigh add...) the destination eth interface is not replying to arp requests.

Details! Can you show the configuration, on both ends, and the output of 'ip route' on both ends?

Quoted 1 line

What could be the problem?

I'm looking at my glass ball, but nothing appears.

Regards,

bert

Signature · 8 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/