Truncated message
Hi!
I've a problem getting a route with the ip command. When i try the command
ip route get <ip>
which should show me the route to the target <ip>, i only get the message:
Truncated message
The problem appears with any of my network devices, which are
a ISDN card ippp0 to connect to the internet
a Ethernet card eth0 to connect to a private network 192.168.0.0 and the problem also appears at the loopback-device if i try to get a route to 127.0.0.1
I've nowhere found an explanation of this message, so i've absolutly no plan what the problem is.
Would be nice if anyone colud help me. Thanks!
Martin
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 5 lines · Martin Schultheiss
ip route get <ip>
which should show me the route to the target <ip>, i only get the message:
Truncated message
Well, I just tried it (never understood before what ip route get was supposed to do!) and it works for me!
$ sudo ip ro get 10.1.2.4
10.1.2.4 via 213.244.168.193 dev eth0 src 213.244.168.210
cache mtu 1500Quoted 4 lines
I've nowhere found an explanation of this message, so i've absolutly no plan what the problem is.
Would be nice if anyone colud help me. Thanks!
Which version if iproute do you run? Do you have 'route information socket' (or something like that) enabled in your kernel?
Regards,
bert
Signature · 8 lines
http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Am Montag, 31. Dezember 2001 16:49 meinte bert hubert:
Quoted 2 lines
Well, I just tried it (never understood before what ip route get was supposed to do!) and it works for me!
I've searched the whole google-archive and did'nt found anyone who has exactly this problem. I've even loocked into the source, but i don't know much enough to understand it and the source i have is sparely commented.
Quoted 3 lines
$ sudo ip ro get 10.1.2.4
10.1.2.4 via 213.244.168.193 dev eth0 src 213.244.168.210
cache mtu 1500That's the ouptut which someone should get as described in the doc, and that's what i want to get...
Quoted 2 lines
Which version if iproute do you run? Do you have 'route information socket' (or something like that) enabled in your kernel?
Version ss010803.
Sorry, i'm new on this topic. Can you tell me how to find out if it is enabled in my kernel? I use SuSE Linux 7.3, with the default kernel installed. Kernel-Version is 2.4.10.
Martin
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Well, I just tried it (never understood before what ip route get was supposed to do!) and it works for me!
$ sudo ip ro get 10.1.2.4
10.1.2.4 via 213.244.168.193 dev eth0 src 213.244.168.210
cache mtu 1500i too tried it but get the result--->Truncated message... !!
am using iproute2-ss010803 with RH7.2 , am using coomplied iproute & not the RPM !
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/