RED problem !
hi all,
while trying red inplace of sfq/pfifo i go the follwing error
tc qdisc add dev eth0 parent 1:470 red max 12288 min 6100 limit 12288 avpkt 1514 burst 2
RED : failed to calculate EWMA constant
i have the scheduling as modules, so i did insmod & tried again but the result was same !
pls can anyone tell me whats the mistake
thanx in anticipation
arindam haldar
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 6 lines · Arindam Haldar
hi all,
while trying red inplace of sfq/pfifo i go the follwing error
tc qdisc add dev eth0 parent 1:470 red max 12288 min 6100 limit 12288 avpkt 1514 burst 2
This returns -1:
int tc_red_eval_ewma(unsigned qmin, unsigned burst, unsigned avpkt)
{
int wlog = 1;
double W = 0.5;
double a = (double)burst + 1 - (double)qmin/avpkt;
if (a < 1.0)
return -1;
for (wlog=1; wlog<32; wlog++, W /= 2) {
if (a <= (1 - pow(1-W, burst))/W)
return wlog;
}
return -1;
}You can use this to calculate what is wrong. Either burst+1-qmin/avpkt is smaller than 1, or a is too high to be matched by a time constant.
Regards,
bert
Signature · 8 lines
http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Or from my law for implement RED you can go with
# /sbin/tc qdisc add dev <eth0> parent 10:<2000> red max <64000> min 1500 \ limit <64kb> avpkt 1000 burst 20 here, parameters in <> are variable and leave rest as it is I assume you wana shapping of 64kb 2000 is id parameter to max is (64 * 1000)
-----Original Message-----
From: bert hubert <[email protected]>
To: Arindam Haldar <[email protected]>
Cc: [email protected]
Subject: Re: [LARTC] RED problem !
Quoted 6 lines · Arindam Haldar
hi all,
while trying red inplace of sfq/pfifo i go the follwing error
tc qdisc add dev eth0 parent 1:470 red max 12288 min 6100 limit 12288 avpkt 1514 burst 2
This returns -1:
int tc_red_eval_ewma(unsigned qmin, unsigned burst, unsigned avpkt)
{
int wlog = 1;
double W = 0.5;
double a = (double)burst + 1 - (double)qmin/avpkt;
if (a < 1.0)
return -1;
for (wlog=1; wlog<32; wlog++, W /= 2) {
if (a <= (1 - pow(1-W, burst))/W)
return wlog;
}
return -1;
}You can use this to calculate what is wrong. Either burst+1-qmin/avpkt is smaller than 1, or a is too high to be matched by a time constant.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/