Skip to contentSkip to conversation

advanced routing for 2 internet lines

LARTC Dirk Schäpsmeyer 2 participants 3 messages Jan 2, 2002 – Jan 3, 2002

lore
Share & tools
lore
#0 lore raw

Hi all,

I have a Linux box with two connections to the internet over two routers and a private internal network. The linux box does masquerading.

internet +----------+ 172.16.0.1 +-------------------+
<---- | Router 1 |-------------------| |

	   +----------+                   |  172.16.0.2       |
                                        |                   | eth1
192.168.0.99
                                        |  Linux box
|----------------------- ... clients ...
internet +----------+ 172.16.0.3        |                   |
  <----  | Router 2 |-------------------|  routers on eth0  |
	   +----------+                   |                   |
                                        +-------------------+

Now I want it to work in the way I'll describe now:

Basically, every ip-traffic should work over the default-route 172.16.0.1 (router 1). But ip-traffic with e.g. destination port 8123 und 8124 should work over the 2nd router(172.16.0.3).
Certain webservers, like e.g. gmx.com are should ONLY be connected over router 2.

To do that, I "invented" following but yet not working solution to it:

ip route add default via 172.16.0.1 dev eth0
ip route add default via 172.16.0.3 dev eth0 table 100 ip rule add fwmark 1 table 100
ip route flush cache

iptables -A OUTPUT -t mangle -p tcp -s 172.16.0.2 --dport 8123 -j
MARK --set-mark 1

	iptables -A OUTPUT -t mangle -p tcp -s 172.16.0.2 --dport 8124 -j

MARK --set-mark 1

[..not mentioning masquerading rules etc.. ]

The port routing from 8123 and 8124 over the 2nd router works without problems.

But how do I create the routing for ftp-traffic and the connecting to certain webservers over the 2nd router?

Thanks a lot!

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#1 lore raw
Quoted 4 lines · Dirk Schäpsmeyer

Hi all,

I have a Linux box with two connections to the internet over two routers

and

Quoted 18 lines

a private internal network. The linux box does masquerading.

internet +----------+ 172.16.0.1        +-------------------+
  <----  | Router 1 |-------------------|                   |
         +----------+                   |  172.16.0.2       |
                                        |                   | eth1
192.168.0.99
                                        |  Linux box
|----------------------- ... clients ...
internet +----------+ 172.16.0.3        |                   |
  <----  | Router 2 |-------------------|  routers on eth0  |
         +----------+                   |                   |
                                        +-------------------+
Quoted 3 lines

Now I want it to work in the way I'll describe now:

Basically, every ip-traffic should work over the default-route

172.16.0.1

Quoted 18 lines

(router 1). But ip-traffic with e.g. destination port 8123 und 8124 should work over the 2nd router(172.16.0.3).
Certain webservers, like e.g. gmx.com are should ONLY be connected over router 2.

To do that, I "invented" following but yet not working solution to it:

ip route add default via 172.16.0.1 dev eth0 ip route add default via 172.16.0.3 dev eth0 table 100 ip rule add fwmark 1 table 100
ip route flush cache

iptables -A OUTPUT -t mangle -p tcp -s 172.16.0.2 --dport 8123 -j
MARK --set-mark 1

      iptables -A OUTPUT -t mangle -p tcp -s 172.16.0.2 --dport 8124 -j

MARK --set-mark 1

Quoted 7 lines

[..not mentioning masquerading rules etc.. ]

The port routing from 8123 and 8124 over the 2nd router works without problems.

But how do I create the routing for ftp-traffic and the connecting to certain webservers over the 2nd router?

Well I think you do the same thing but your ftp traffic would have you fw marking dport 21 and 20 traffic and your webserver traffic would have you fw marking dport 80 traffic to certain dest ip address. Seems simple enough unless i am missing something here?

Quoted 7 lines

Thanks a lot!

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

http://ds9a.nl/lartc/

Quoted 1 line

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#2 lore raw
In reply to Dirk Schäpsmeyer
Quoted 50 lines
Quoted 4 lines

Hi all,

I have a Linux box with two connections to the internet over two routers

and

Quoted 18 lines

a private internal network. The linux box does masquerading.

internet +----------+ 172.16.0.1        +-------------------+
  <----  | Router 1 |-------------------|                   |
         +----------+                   |  172.16.0.2       |
                                        |                   | eth1
192.168.0.99
                                        |  Linux box
|----------------------- ... clients ...
internet +----------+ 172.16.0.3        |                   |
  <----  | Router 2 |-------------------|  routers on eth0  |
         +----------+                   |                   |
                                        +-------------------+
Quoted 3 lines

Now I want it to work in the way I'll describe now:

Basically, every ip-traffic should work over the default-route

172.16.0.1

Quoted 23 lines

(router 1). But ip-traffic with e.g. destination port 8123 und 8124 should work over the 2nd router(172.16.0.3).
Certain webservers, like e.g. gmx.com are should ONLY be connected over router 2.

To do that, I "invented" following but yet not working solution to it:

ip route add default via 172.16.0.1 dev eth0 ip route add default via 172.16.0.3 dev eth0 table 100 ip rule add fwmark 1 table 100
ip route flush cache

iptables -A OUTPUT -t mangle -p tcp -s 172.16.0.2 --dport 8123 -j
MARK --set-mark 1

      iptables -A OUTPUT -t mangle -p tcp -s 172.16.0.2 --dport 8124 -j

MARK --set-mark 1

[..not mentioning masquerading rules etc.. ]

The port routing from 8123 and 8124 over the 2nd router works without problems.

Quoted 7 lines
Quoted 2 lines

But how do I create the routing for ftp-traffic and the connecting to certain webservers over the 2nd router?

Well I think you do the same thing but your ftp traffic would have you fw marking dport 21 and 20 traffic and your webserver traffic would have you fw marking dport 80 traffic to certain dest ip address. Seems simple enough unless i am missing something here?

I tried it with this method but didn't have much success.

I noticed this:

If ftp-traffic comes over the 1st router and goes to the ftp-server 172.16.0.2, it seems to work. But if ip-traffic comes over the 2nd router and goes to the ftpserver,
the answering ipframes coming from the server don't seem to come over the 2nd router - in this case the ftpserver uses the default route over the 1st router. According to that, a connection never happens.

Similar things seem to happen with the ip-traffic to certain webservers. If I call the url the first frames come over the 2nd router but after that, the rest gets lead over the 1st router.

It really doesn't seem to be that easy but I hope you can help me.

Thanks, Dirk

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/