Skip to contentSkip to conversation

Question regarding loadsharing and bonding

LARTC Wayne Fallows 2 participants 2 messages Jan 4, 2002 – Jan 5, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

My question is if you can use load sharing to simulate or substitute bonding of connection lines.

Background:

I live in South Africa where ISDN is sold as a new technology and ADSL is not available to us. Most ISP's are not able to do ISDN bonding, so the maks down load that you are able to get is 64k. Getting an ISP to do anything is a miracle.

Is it possible to install 2 ISDN cards and do load sharing on them? I know the throughput will not be 100%. What will the through put be and is it possible to monitor and change the methods that are used?

Regards

Wayne

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#1 lore raw
Quoted 3 lines · Wayne Fallows

Is it possible to install 2 ISDN cards and do load sharing on them? I know the throughput will not be 100%. What will the through put be and is it possible to monitor and change the methods that are used?

It is very hard to get a single TCP/IP session to go faster. It is pretty easy to distribute sessions over two ISDN connections by using the ip route nexthop syntax (find it with google). If you have a lot of computers behind your router, that will help.

Regards,

bert

Signature · 8 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/