Skip to contentSkip to conversation

LARTC -- confirmation of subscription -- request 261200

LARTC Marc Evans 5 participants 7 messages Jan 11, 2002 – May 19, 2004

lore
Share & tools
lore

Marc Evans

author
#0 lore raw
Quoted 13 lines · On Fri, 11 Jan 2002 [email protected] wrote:

LARTC -- confirmation of subscription -- request 261200

We have received a request from 148.63.239.241 for subscription of your email address, <[email protected]>, to the [email protected] mailing list. To confirm the request, please send a message to [email protected], and either:

- maintain the subject line as is (the reply's additional "Re:" is ok),

- or include the following line - and only the following line - in the message body:

Quoted 9 lines

confirm 261200

(Simply sending a 'reply' to this message should work from most email interfaces, since that usually leaves the subject line in the right form.)

If you do not wish to subscribe to this list, please simply disregard this message. Send questions to [email protected].

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#1 lore raw

[LARTC] Re: LARTC -- confirmation of subscription -- request 626047

Hello,
i have just started using "The Wonder Shaper" for my cable connection, when i run ./wshaper status
i get:

qdisc ingress ffff:
Sent 1842 bytes 31 pkts (dropped 0, overlimits 0)

qdisc sfq 30: quantum 1514b perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc sfq 20: quantum 1514b perturb 10sec
Sent 133 bytes 2 pkts (dropped 0, overlimits 0)

qdisc sfq 10: quantum 1514b perturb 10sec Sent 3592 bytes 28 pkts (dropped 0, overlimits 0)

qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit Sent 3725 bytes 30 pkts (dropped 0, overlimits 1)
borrowed 0 overactions 0 avgidle 624 undertime 0

class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:10 parent 1:1 leaf 10: rate 250Kbit prio 1
Sent 3780 bytes 30 pkts (dropped 0, overlimits 1)
borrowed 0 overactions 1 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 250Kbit (bounded,isolated) prio 5
Sent 3913 bytes 32 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:20 parent 1:1 leaf 20: rate 225Kbit prio 2
Sent 133 bytes 2 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:30 parent 1:1 leaf 30: rate 200Kbit prio 2
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0

is this good?
or could some one please explain to me what some of this information means to me?

thanks in advance for your time!
ken

----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Thursday, October 16, 2003 10:45 AM
Subject: LARTC -- confirmation of subscription -- request 626047

Quoted 15 lines

LARTC -- confirmation of subscription -- request 626047

We have received a request from 206.130.189.53 for subscription of your email address, <[email protected]>, to the [email protected] mailing list. To confirm the request, please send a message to [email protected], and either:

- maintain the subject line as is (the reply's additional "Re:" is ok),

- or include the following line - and only the following line - in the message body:

confirm 626047

Quoted 10 lines

(Simply sending a 'reply' to this message should work from most email interfaces, since that usually leaves the subject line in the right form.)

If you do not wish to subscribe to this list, please simply disregard this message. Send questions to [email protected].
---
[This E-mail scanned for viruses by Declude Virus]

---
[This E-mail scanned for viruses by Declude Virus]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw

Re: [LARTC] Re: LARTC -- confirmation of subscription -- request 626047

In reply to Marc Evans
Quoted 38 lines · Ken Scott

Hello,
i have just started using "The Wonder Shaper" for my cable connection, when i run ./wshaper status
i get:

qdisc ingress ffff:
Sent 1842 bytes 31 pkts (dropped 0, overlimits 0)

qdisc sfq 30: quantum 1514b perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc sfq 20: quantum 1514b perturb 10sec
Sent 133 bytes 2 pkts (dropped 0, overlimits 0)

qdisc sfq 10: quantum 1514b perturb 10sec Sent 3592 bytes 28 pkts (dropped 0, overlimits 0)

qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit Sent 3725 bytes 30 pkts (dropped 0, overlimits 1)
borrowed 0 overactions 0 avgidle 624 undertime 0

class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:10 parent 1:1 leaf 10: rate 250Kbit prio 1
Sent 3780 bytes 30 pkts (dropped 0, overlimits 1)
borrowed 0 overactions 1 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 250Kbit (bounded,isolated) prio 5
Sent 3913 bytes 32 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:20 parent 1:1 leaf 20: rate 225Kbit prio 2
Sent 133 bytes 2 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:30 parent 1:1 leaf 30: rate 200Kbit prio 2
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0

Quoted 3 lines

is this good?
or could some one please explain to me what some of this information means to me?

You ask us to explain everything :)
You can find all needed information on http://lartc.org and http://docum.org.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw

Re: [LARTC] Re: LARTC -- confirmation of subscription -- request 626047

In reply to Marc Evans

----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Ken Scott" <[email protected]>; <[email protected]>
Sent: Thursday, October 16, 2003 1:11 PM
Subject: Re: [LARTC] Re: LARTC -- confirmation of subscription -- request 626047

Quoted 39 lines · Ken Scott
Quoted 38 lines

Hello,
i have just started using "The Wonder Shaper" for my cable connection, when i run ./wshaper status
i get:

qdisc ingress ffff:
Sent 1842 bytes 31 pkts (dropped 0, overlimits 0)

qdisc sfq 30: quantum 1514b perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc sfq 20: quantum 1514b perturb 10sec
Sent 133 bytes 2 pkts (dropped 0, overlimits 0)

qdisc sfq 10: quantum 1514b perturb 10sec Sent 3592 bytes 28 pkts (dropped 0, overlimits 0)

qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit Sent 3725 bytes 30 pkts (dropped 0, overlimits 1)
borrowed 0 overactions 0 avgidle 624 undertime 0

class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:10 parent 1:1 leaf 10: rate 250Kbit prio 1
Sent 3780 bytes 30 pkts (dropped 0, overlimits 1)
borrowed 0 overactions 1 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 250Kbit (bounded,isolated) prio 5
Sent 3913 bytes 32 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:20 parent 1:1 leaf 20: rate 225Kbit prio 2
Sent 133 bytes 2 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:30 parent 1:1 leaf 30: rate 200Kbit prio 2
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0

Quoted 2 lines
Quoted 2 lines

is this good?
or could some one please explain to me what some of this information

means

Quoted 3 lines
Quoted 1 line

to me?

You ask us to explain everything :)
You can find all needed information on http://lartc.org and

http://docum.org.

Quoted 2 lines

Stef

No, i didn't ask u to explain everything, i asked if some one could tell me what "some" of this information is,
and weather or not it is working correctly according that the information that i have posted above.

oh and the documentation on the lartc.org site sux.

Quoted 14 lines
Signature · 11 lines
-- 
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
---
[This E-mail scanned for viruses by Declude Virus]

---
[This E-mail scanned for viruses by Declude Virus]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw

Re: [LARTC] Re: LARTC -- confirmation of subscription -- request 626047

In reply to Marc Evans

Ken:

Insulting Stef is a loser, as far as techniques to get free support go. To understand the output that you gave us, you have to know which class is devoted to which streams. Stef isn't the wondershaper guy. Try asking whoever wrote it.

If you want to know if its "working", you have to ask yourself "what do I want it to do?". I'm guessing you want to be able to use some real-time app (game or gnomemeeting) or surf while a network backup runs or while someone transfers a large file. If you can do that, then it's working. If you can't, then it isn't. Try it with and without the shaper. See if you can tell the difference. The output you included implies that you really haven't done much in the way of competing flows (1 dropped packet, 1 overlimit) so it's impossible to say whether it works for you.

Quoted 84 lines · Ken Scott

----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Ken Scott" <[email protected]>; <[email protected]>
Sent: Thursday, October 16, 2003 1:11 PM
Subject: Re: [LARTC] Re: LARTC -- confirmation of subscription -- request 626047

Quoted 39 lines · Ken Scott
Quoted 38 lines

Hello,
i have just started using "The Wonder Shaper" for my cable connection, when i run ./wshaper status
i get:

qdisc ingress ffff:
Sent 1842 bytes 31 pkts (dropped 0, overlimits 0)

qdisc sfq 30: quantum 1514b perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc sfq 20: quantum 1514b perturb 10sec
Sent 133 bytes 2 pkts (dropped 0, overlimits 0)

qdisc sfq 10: quantum 1514b perturb 10sec Sent 3592 bytes 28 pkts (dropped 0, overlimits 0)

qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit Sent 3725 bytes 30 pkts (dropped 0, overlimits 1)
borrowed 0 overactions 0 avgidle 624 undertime 0

class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:10 parent 1:1 leaf 10: rate 250Kbit prio 1
Sent 3780 bytes 30 pkts (dropped 0, overlimits 1)
borrowed 0 overactions 1 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 250Kbit (bounded,isolated) prio 5
Sent 3913 bytes 32 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:20 parent 1:1 leaf 20: rate 225Kbit prio 2
Sent 133 bytes 2 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:30 parent 1:1 leaf 30: rate 200Kbit prio 2
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0

Quoted 2 lines
Quoted 2 lines

is this good?
or could some one please explain to me what some of this information

means

Quoted 3 lines
Quoted 1 line

to me?

You ask us to explain everything :)
You can find all needed information on http://lartc.org and

http://docum.org.

Quoted 2 lines

Stef

No, i didn't ask u to explain everything, i asked if some one could tell me what "some" of this information is,
and weather or not it is working correctly according that the information that i have posted above.

oh and the documentation on the lartc.org site sux.

Quoted 14 lines
Signature · 11 lines
-- 
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
---
[This E-mail scanned for viruses by Declude Virus]

---
[This E-mail scanned for viruses by Declude Virus]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 3 lines
    Lawrence MacIntyre     865.574.8696     [email protected]
               Oak Ridge National Laboratory
High Performance Information Infrastructure Technology Group
#5 lore raw

Re: [LARTC] Re: LARTC -- confirmation of subscription -- request 626047

In reply to Marc Evans
Quoted 6 lines · Ken Scott

No, i didn't ask u to explain everything, i asked if some one could tell me what "some" of this information is,
and weather or not it is working correctly according that the information that i have posted above.

oh and the documentation on the lartc.org site sux.

If lartc.org sux, check out docum.org. If that sux also and if you think you can do it better, go ahead. Good luck.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/