Skip to contentSkip to conversation

i finally got my bandwidth shaping working

LARTC Chandrashekhar Joshi 1 participant 2 messages Jan 18, 2002 – Jan 22, 2002

lore
Share & tools
lore
#1 lore raw

hello
well i haven't prepared any supporting docs but if you want i can write down what i have done.
basically install the HTB patch available at
http://luxik.cdi.cz/~devik/qos/htb/
the manual alongwith it is quite comprehensive with clear examples. Use the same example rulesets (from the manual) and customise them for your use.
to do traffic shaping for both incoming and outgoing, use rulesets for both the interface cards on your gateway machine.
assuming eth1 is being used for internet connectivity and eth0 for lan connectivity, configure the rulesets for device eth0 to restrict/shape incoming(from the internet) traffic and configure the rulesets for the device eth1 to restrict/shape outgoing(to the internet) traffic.

regards /shekhar
NB : if any mistakes please point them out to me.

Quoted 26 lines · me here

helo

Could u tell me how got it happening if u odnt mind?

or support it with any docs?

Chandrashekhar Joshi <[email protected]> wrote:

hello

thanks to all the help on the mailing list and specially to devik, using htb, i am now able to shape both vpn and and normal traffic.

thanks
shekhar

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://ds9a.nl/lartc/

------------------------------------------------------------------------
Do You Yahoo!?
Send FREE video <http://rd.yahoo.com/mail_us/tag/?http://promo.yahoo.com/videomail/> emails in Yahoo! Mail <http://rd.yahoo.com/mail_us/tag/?http://mail.yahoo.com/> .