Skip to contentSkip to conversation

Followup Question: Help with GRE Tunneling

LARTC Glynn S. Condez 1 participant 1 message Feb 13, 2002

lore
Share & tools
lore
#0 lore raw

I would like to make both Network A and B have the same subnet. I did a changes to my config pls correct if this will work.

#Network A
/sbin/echo 1 > /proc/sys/net/ipv4/ip_forward /sbin/ipchains -A forward -s 192.168.1.0/24 -j MASQ
#/sbin/ipchains -A forward -s 192.168.2.0/24 -j MASQ # this will be omitted
/sbin/insmod ip_gre

/sbin/ip tunnel add alas mode gre remote x.x.x.x local y.y.y.y ttl 255 /sbin/ip link set netb up
/sbin/ip addr add 192.168.1.1 dev netb
/sbin/ip route add 192.168.1.0/24 dev netb # this option dont work coz theres an existing route in routing table and the routing table is set to eth1 interface. so if i force to add it using "route add -net 192.168.1.0 netmask 255.255.255.0 dev neta"

                                                                  it cant ping the internal ip's only the tunnel is working :(

------------------------------------------------------------------------------

#Network B
/sbin/echo 1 > /proc/sys/net/ipv4/ip_forward
#/sbin/ipchains -A forward -s 192.168.2.0/24 -j MASQ # this will be omitted /sbin/ipchains -A forward -s 192.168.1.0/24 -j MASQ

/sbin/insmod ip_gre
/sbin/ip tunnel add text mode gre remote y.y.y.y local x.x.x.x ttl 255 /sbin/ip link set neta up
/sbin/ip addr add 192.168.1.2 dev neta
/sbin/ip route add 192.168.1.0/24 dev neta # this option dont work coz theres an existing route in routing table and the routing table is set to eth1 interface. so if i force to add it using "route add -net 192.168.1.0 netmask 255.255.255.0 dev neta"

                                                                  it cant ping the internal ip's only the tunnel is working :(

Pls check correct this config if its possible to work. Thanks