CBQ by IP address
Hello,
I have a Q running (script attached, from the how-to) which does the following:
1. Assign 6MBit to link
2. Assign 5MBit to 192.168.230.0/24
3. Assign 3MBit to 192.168.220.0/24
I have two questions:
1. Is it possible to set a limit for a particular IP address, rather than a range? I've tried the following:
match ip src 192.168.230.1 - the filter has no effect on traffic
match ip src 192.168.230.4/32 - the filter has no effect on traffic match ip src 192.168.230.1/24 - the filter affects the whole 192.168.230.0 network
2. With the attached script, bandwidth is set to 5MBit or 3Mbit for a single machine on the filtered networks. When I add another machine on the same network, both machines get half of the rate. Is there a way to say that all machines on a particular /24 are limited to a particular rate, rather than sharing it between them?
Many thanks,
Gavin
#!/bin/bash
#Test script
# One class, bounded at 6Mbit. Two classes, bounded, 3Mbit and 5Mbit, not sharing extra.
#Delete the existing eth0 root qdisc
tc qdisc del dev eth0 root
#Add root qdisc
tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000 cell 8
#Add 1:0 class, with 6Mbit limit
tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 100Mbit rate 6Mbit weight 0.6Mbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded
#Add first class, limited to 5Mbit
tc class add dev eth0 parent 1:1 classid 1:3 cbq bandwidth 100Mbit rate 5Mbit weight 0.5Mbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded
#Add second class, limited to 3Mbit
tc class add dev eth0 parent 1:1 classid 1:4 cbq bandwidth 100Mbit rate 3Mbit weight 0.3Mbit prio 5 allot 1514
cell 8 maxburst 20 avpkt 1000 bounded
#Add qdisc for class 1:3
tc qdisc add dev eth0 parent 1:3 handle 30: sfq
#Add qdisc for class 1:4
tc qdisc add dev eth0 parent 1:4 handle 40: sfq
#Add filter for 192.168.230.0
tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip src 192.168.230.0/24 flowid 1:3 #tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip src 192.168.230.1 flowid 1:3 #tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip src 192.168.230.1/24 flowid 1:3 #tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip src 192.168.230.1/32 flowid 1:3
#Add filter for 192.168.220.0
tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip src 192.168.220.0/24 flowid 1:4
Quoted 11 lines · you
Hello,
I have a Q running (script attached, from the how-to) which does the following:
1. Assign 6MBit to link
2. Assign 5MBit to 192.168.230.0/24
3. Assign 3MBit to 192.168.220.0/24I have two questions:
Quoted 7 lines
1. Is it possible to set a limit for a particular IP address, rather than a range? I've tried the following:
match ip src 192.168.230.1 - the filter has no effect on traffic
match ip src 192.168.230.4/32 - the filter has no effect on traffic match ip src 192.168.230.1/24 - the filter affects the whole 192.168.230.0 network
This works for me :
tc filter add dev eth0 parent 10: protocol ip u32 match ip dst 192.168.1.253 flowid 10:10
Quoted 6 lines
2. With the attached script, bandwidth is set to 5MBit or 3Mbit for a single machine on the filtered networks. When I add another machine on the same network, both machines get half of the rate. Is there a way to say that all machines on a particular /24 are limited to a particular rate, rather than sharing it between them?
The only thing you can do is create a class and filter for each of the extra machines. The WRR qdisc can do this automatically, but I never tried it. It creates a class for each ip-address or mac-address it sees and gives each class an equal umount of bandwidth.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/