Skip to contentSkip to conversation

Managing downloads

LARTC Gavin 2 participants 2 messages Mar 21, 2002 – Mar 22, 2002

lore
Share & tools
lore

Gavin

author
#0 lore raw

Hello,

thanks for the help I've received here, I think I've cracked my problem. I have a tiny (5MBit) satellite downlink to share between several thousand clients, and I wanted to give higher paying clients more speed.

I tried WRR, but after three days meddling with kernels etc, gave up. The attached script uses CBQ to do the following:

Create classes for various speeds (512Kbit -> 8Kbit), and assign IP addresses to each class

Create a default class, limited to 2Mbit, which everyone else will share equally (SFQ)

I've tested it quite a bit, and it seems to work. However, I really don't know the details of tc etc, so it's possible that this is total rubbish. If it is, could someone point this out?

Also, does anyone know a good way of filtering by MAC address, rather than by IP address?

Gavin

#1 lore raw

hi!

Quoted 2 lines

Also, does anyone know a good way of filtering by MAC address, rather than by IP address?

use the ability of netfilter to mark those packets - this works fine here.

greetings
Sebastian

Signature · 8 lines
Sebastian 'spax' Pape          | Never argue with an idiot. They drag you down 
mailto: [email protected]   | to their level, then beat you with experience.
pgp: http://p-a-p-e.de/pgp.asc | 
         --- Do you want to know more? http://www.p-a-p-e.de/ ---

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/