htb ceiling
Hello,
I'm using HTB (through htb.init :) and it's nearly perfect, but the CEIL directive seems to have no effect.
The relevant lines are:
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100
tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst 15k tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit ceil 512Kbit burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.2 classid 1:40
- this allows 10.0.0.2 to download at 256Kbit, even when it is the only
machine doing any downloading. I can affect this speed by changing the $rate, but changing $ceil has no effect whatsoever.
Platform:
RH7.2, 2.4.9-31 (patched for htb)
tc patched for htb
iproute2-ss001007 (Tried the patch for htb, but compilation failed with /usr/include/arpa/inet.h:74: warning: data definition has no type or storage class/usr/include/arpa/inet.h:78: parse error before `__net'
)
Is there something wrong with the above commands?
Thanks,
Gavin
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 15 lines · Gavin
Hello,
I'm using HTB (through htb.init :) and it's nearly perfect, but the CEIL directive seems to have no effect.
The relevant lines are:
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100
tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst 15k tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit ceil 512Kbit burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.2 classid 1:40
Quoted 3 lines
- this allows 10.0.0.2 to download at 256Kbit, even when it is the only
machine doing any downloading. I can affect this speed by changing the $rate, but changing $ceil has no effect whatsoever.
The ceil will prevent 10.0.0.2 to download faster then 512 kbit. The rate will say how much 10.0.0.2 can download compare to the other classes (so the other lines are also relevant :).
As example : If you have a second class :
tc class add dev eth1 parent 1:2 classid 1:50 htb rate 256Kbit ceil 512Kbit burst 15k
Then both classes will get 50% of the bandwidth if they are both downloading.
If they are alone, they can get the 512 Kbit.
Second example :
tc class add dev eth1 parent 1:2 classid 1:50 htb rate 128Kbit ceil 512Kbit burst 15k
Class 1:50 and class 1:40 are downloading -> class 1:40 will get 256 * (512/(256+128)) = 341 kbit and class 1:50 : 128 * (512/(256+128)) = 171 Kbit (they will devide the bandwidth compared to the rates).
I hope you understand what you want I want to say and I hope it's an answer on your question :)
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
The full output of htp.init compile is this:
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100
tc class add dev eth1 parent 1:2 classid 1:10 htb rate 2Mbit ceil 2Mbit burst 15k
tc qdisc add dev eth1 parent 1:10 handle 10 sfq perturb 10
tc class add dev eth1 parent 1:2 classid 1:20 htb rate 1Mbit ceil 5Mbit burst 15k
tc qdisc add dev eth1 parent 1:20 handle 20 sfq perturb 10
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dport 25 0xffff classid 1:20
tc class add dev eth1 parent 1:2 classid 1:30 htb rate 512Kbit ceil 1Mbit burst 15k
tc qdisc add dev eth1 parent 1:30 handle 30 sfq perturb 10
tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit ceil 512Kbit burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.2 classid 1:40
tc class add dev eth1 parent 1:2 classid 1:50 htb rate 128Kbit ceil 256Kbit burst 15k
tc qdisc add dev eth1 parent 1:50 handle 50 sfq perturb 10
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.150 classid 1:50
tc class add dev eth1 parent 1:2 classid 1:60 htb rate 64bit ceil 128bit burst 15k
tc qdisc add dev eth1 parent 1:60 handle 60 sfq perturb 10
tc class add dev eth1 parent 1:2 classid 1:70 htb rate 32Kbit ceil 64Kbit burst 15k
tc qdisc add dev eth1 parent 1:70 handle 70 sfq perturb 10
tc class add dev eth1 parent 1:2 classid 1:80 htb rate 16bit ceil 32bit burst 15k
tc qdisc add dev eth1 parent 1:80 handle 80 sfq perturb 10
tc class add dev eth1 parent 1:2 classid 1:90 htb rate 8Kbit ceil 16Kbit burst 15k
tc qdisc add dev eth1 parent 1:90 handle 90 sfq perturb 10
tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst 15k
- the only classes with any filters are 1:40(256Kbit/512kKbit) for 10.0.0.2
and 1:50(128Kbit/256Kbit) for 10.0.0.150. I just ran some more tests, and 10.0.0.150 can still only get 128Kbit
Am I seriously misunderstanding how this works?
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Gavin" <[email protected]>; <[email protected]>
Sent: Friday, April 05, 2002 11:42 AM
Subject: Re: [LARTC] htb ceiling
Quoted 10 lines · Gavin
Hello,
I'm using HTB (through htb.init :) and it's nearly perfect, but the CEIL directive seems to have no effect.
The relevant lines are:
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100 tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst 15k tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit ceil
512Kbit
Quoted 8 lines
burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10 tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.2 classid 1:40- this allows 10.0.0.2 to download at 256Kbit, even when it is the only
machine doing any downloading. I can affect this speed by changing the $rate, but changing $ceil has no effect whatsoever.
The ceil will prevent 10.0.0.2 to download faster then 512 kbit. The rate will say how much 10.0.0.2 can download compare to the other classes (so the other lines are also relevant :).
As example : If you have a second class :
tc class add dev eth1 parent 1:2 classid 1:50 htb rate 256Kbit ceil 512Kbit burst 15k
Then both classes will get 50% of the bandwidth if they are both downloading.
If they are alone, they can get the 512 Kbit.
Second example :
tc class add dev eth1 parent 1:2 classid 1:50 htb rate 128Kbit ceil 512Kbit burst 15k
Class 1:50 and class 1:40 are downloading -> class 1:40 will get 256 * (512/(256+128)) = 341 kbit and class 1:50 : 128 * (512/(256+128)) = 171 Kbit (they will devide the bandwidth compared to the rates).
I hope you understand what you want I want to say and I hope it's an answer on your question :)
Stef
--
[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines
Quoted 8 lines
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100
tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst 15k tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit ceil 512Kbit burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.2 classid 1:40
Quoted 6 lines
Quoted 3 lines
- this allows 10.0.0.2 to download at 256Kbit, even when it is the only
machine doing any downloading. I can affect this speed by changing the $rate, but changing $ceil has no effect whatsoever.The ceil will prevent 10.0.0.2 to download faster then 512 kbit. The rate will say how much 10.0.0.2 can download compare to the other classes (so the other lines are also relevant :).
No Stef,
the rate is really measured - it is used as source for DRR weight (here it is used relative to other classes) and to see whether we need to borrow from parent - here absolute value matters. So that the example above should work and give 512k.
Gavin, did you tried with only these classes present ? (to have maximaly simplified configuration which exhibits it). If yes and it really does only 256k then post
tc -s {qdisc,class} show dev ethXX outputs ... as usual devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I tried it with a minimal config - two classes, each with rate: 256Kbit and
ceiling: 512Kbit and one dest. IP address in each, as well as a default class. Each specified machine could only pull 256Kbit maximum, either alone or with the other downloading as well.
Output of tc -s qdisc show dev eth1:
qdisc sfq 50: quantum 1514b perturb 10sec
Sent 7506464 bytes 4984 pkts (dropped 0, overlimits 0) backlog 6p
qdisc sfq 40: quantum 1514b perturb 10sec Sent 4275617 bytes 2829 pkts (dropped 0, overlimits 0) backlog 3p
qdisc sfq 10: quantum 1514b perturb 10sec Sent 287102 bytes 542 pkts (dropped 0, overlimits 0)
qdisc htb 1: r2q 100 default 10 dcache 0
deq_util 1/1000000 deq_rate 125 trials_per_deq 0 dcache_hits 0 direct_packets 0
Sent 12069183 bytes 8355 pkts (dropped 0, overlimits 15537) backlog 9p
Output of tc -s class show dev eth1:
class htb 1:10 root leaf 10: prio 0 rate 2Mbit ceil 2Mbit burst 15Kb cburst 4220b
Sent 331368 bytes 678 pkts (dropped 0, overlimits 32)
rate 107bps
lended: 678 borrowed: 0 giants: 0 injects: 0
tokens: 47825 ctokens: 13015
class htb 1:2 root prio 0 rate 5Mbit ceil 5Mbit burst 15Kb cburst 8151b
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0 injects: 0
tokens: 19199 ctokens: 10190
class htb 1:40 root leaf 40: prio 0 rate 256Kbit ceil 512Kbit burst 15Kb cburst 2254b
Sent 4275671 bytes 2830 pkts (dropped 0, overlimits 0)
rate 226bps
lended: 2830 borrowed: 0 giants: 0 injects: 0
tokens: 382801 ctokens: 27588
class htb 1:50 root leaf 50: prio 0 rate 256Kbit ceil 512Kbit burst 15Kb cburst 2254b
Sent 8214460 bytes 5467 pkts (dropped 0, overlimits 0)
rate 546bps
lended: 5467 borrowed: 0 giants: 0 injects: 0
tokens: 382801 ctokens: 27588
Output of htb.init compile:
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100
tc class add dev eth1 parent 1:2 classid 1:10 htb rate 2Mbit ceil 2Mbit burst 15k
tc qdisc add dev eth1 parent 1:10 handle 10 sfq perturb 10
tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit ceil 512Kbit burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.20 classid 1:40
tc class add dev eth1 parent 1:2 classid 1:50 htb rate 256Kbit ceil 512Kbit burst 15k
tc qdisc add dev eth1 parent 1:50 handle 50 sfq perturb 10
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.150 classid 1:50
tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst 15k
Gavin
----- Original Message -----
From: "Martin Devera" <[email protected]>
To: "Stef Coene" <[email protected]>
Cc: "Gavin" <[email protected]>; <[email protected]>
Sent: Friday, April 05, 2002 1:40 PM
Subject: Re: [LARTC] htb ceiling
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100 tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst 15k tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit ceil
512Kbit
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10 tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip
dst
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
10.0.0.2 classid 1:40
- this allows 10.0.0.2 to download at 256Kbit, even when it is the
only
Quoted 1 line
Quoted 1 line
Quoted 1 line
machine doing any downloading. I can affect this speed by changing
the
Quoted 2 lines
Quoted 2 lines
Quoted 1 line
$rate, but changing $ceil has no effect whatsoever.
The ceil will prevent 10.0.0.2 to download faster then 512 kbit. The
rate
Quoted 1 line
Quoted 1 line
will say how much 10.0.0.2 can download compare to the other classes (so
the
Quoted 8 lines
Quoted 1 line
other lines are also relevant :).
No Stef,
the rate is really measured - it is used as source for DRR weight (here it is used relative to other classes) and to see whether we need to borrow from parent - here absolute value matters. So that the example above should work and give 512k.
Quoted 7 lines
Gavin, did you tried with only these classes present ? (to have maximaly simplified configuration which exhibits it). If yes and it really does only 256k then post
tc -s {qdisc,class} show dev ethXX outputs ... as usual devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
you have error in conf. As you can see class 1:40 and 1:50 are added to the root not as 1:2 children.
The output of htb.init is wrong - you can see that it uses 1:2 class before it demands its create ...
I don't know htb.init - you will have to contact maintainer with bugrerport probably ;)
devik
Quoted 100 lines · Gavin
I tried it with a minimal config - two classes, each with rate: 256Kbit and
ceiling: 512Kbit and one dest. IP address in each, as well as a default class. Each specified machine could only pull 256Kbit maximum, either alone or with the other downloading as well.Output of tc -s qdisc show dev eth1:
qdisc sfq 50: quantum 1514b perturb 10sec
Sent 7506464 bytes 4984 pkts (dropped 0, overlimits 0) backlog 6pqdisc sfq 40: quantum 1514b perturb 10sec Sent 4275617 bytes 2829 pkts (dropped 0, overlimits 0) backlog 3p
qdisc sfq 10: quantum 1514b perturb 10sec Sent 287102 bytes 542 pkts (dropped 0, overlimits 0)
qdisc htb 1: r2q 100 default 10 dcache 0
deq_util1/1000000deq_rate125trials_per_deq0dcache_hits0direct_packets0
Sent 12069183 bytes 8355 pkts (dropped 0, overlimits 15537) backlog 9pOutput of tc -s class show dev eth1:
class htb 1:10 root leaf 10: prio 0 rate 2Mbit ceil 2Mbit burst 15Kb cburst 4220b
Sent 331368 bytes 678 pkts (dropped 0, overlimits 32)
rate 107bps
lended: 678 borrowed: 0 giants: 0 injects: 0
tokens: 47825 ctokens: 13015class htb 1:2 root prio 0 rate 5Mbit ceil 5Mbit burst 15Kb cburst 8151b
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0 injects: 0
tokens: 19199 ctokens: 10190class htb 1:40 root leaf 40: prio 0 rate 256Kbit ceil 512Kbit burst 15Kb cburst 2254b
Sent 4275671 bytes 2830 pkts (dropped 0, overlimits 0)
rate 226bps
lended: 2830 borrowed: 0 giants: 0 injects: 0
tokens: 382801 ctokens: 27588class htb 1:50 root leaf 50: prio 0 rate 256Kbit ceil 512Kbit burst 15Kb cburst 2254b
Sent 8214460 bytes 5467 pkts (dropped 0, overlimits 0)
rate 546bps
lended: 5467 borrowed: 0 giants: 0 injects: 0
tokens: 382801 ctokens: 27588Output of htb.init compile:
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100tc class add dev eth1 parent 1:2 classid 1:10 htb rate 2Mbit ceil 2Mbit burst 15k
tc qdisc add dev eth1 parent 1:10 handle 10 sfq perturb 10tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit ceil 512Kbit burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.20 classid 1:40tc class add dev eth1 parent 1:2 classid 1:50 htb rate 256Kbit ceil 512Kbit burst 15k
tc qdisc add dev eth1 parent 1:50 handle 50 sfq perturb 10
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.150 classid 1:50tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst 15k
Gavin
----- Original Message -----
From: "Martin Devera" <[email protected]>
To: "Stef Coene" <[email protected]>
Cc: "Gavin" <[email protected]>; <[email protected]>
Sent: Friday, April 05, 2002 1:40 PM
Subject: Re: [LARTC] htb ceilingQuoted 3 lines
Quoted 3 lines
Quoted 3 lines
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100 tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst 15k tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit ceil
512Kbit
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10 tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ipdst
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
10.0.0.2 classid 1:40
- this allows 10.0.0.2 to download at 256Kbit, even when it is the
Quoted 26 lines
only
Quoted 1 line
Quoted 1 line
Quoted 1 line
machine doing any downloading. I can affect this speed by changing
the
Quoted 2 lines
Quoted 2 lines
Quoted 1 line
$rate, but changing $ceil has no effect whatsoever.
The ceil will prevent 10.0.0.2 to download faster then 512 kbit. The
rate
Quoted 1 line
Quoted 1 line
will say how much 10.0.0.2 can download compare to the other classes (so
the
Quoted 15 lines
Quoted 1 line
other lines are also relevant :).
No Stef,
the rate is really measured - it is used as source for DRR weight (here it is used relative to other classes) and to see whether we need to borrow from parent - here absolute value matters. So that the example above should work and give 512k.Gavin, did you tried with only these classes present ? (to have maximaly simplified configuration which exhibits it). If yes and it really does only 256k then post
tc -s {qdisc,class} show dev ethXX outputs ... as usual devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines
No Stef,
the rate is really measured - it is used as source for DRR weight (here it is used relative to other classes) and to see whether we need to borrow from parent - here absolute value matters. So that the example above should work and give 512k.
So each class gets it's rate if it can by borrowing from the parent ? But what if the parent has more bandwidth then the rate of the classes? Isn't the remaining bandwith given to the classes compared with the rates ?
What happens of the sum of the rates of the child classes is bigger then the rate of the parent or even the ceil of the parent ?
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Martin Devera
you have error in conf. As you can see class 1:40 and 1:50 are added to the root not as 1:2 children.
The output of htb.init is wrong - you can see that it uses 1:2 class before it demands its create ...
I don't know htb.init - you will have to contact maintainer with bugrerport probably ;)
I know it neither, but I think there is a parent option so you can specify the parent of the class. In your case this is 1:2
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Ah, sweet.
I just ran htb.init compile and moved the last line (tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst 15k) to the third line, then ran it, and all was well.
Thanks Martin and Stef,
Gavin
----- Original Message -----
From: "Martin Devera" <[email protected]>
To: "Gavin" <[email protected]>
Cc: "Stef Coene" <[email protected]>; <[email protected]>
Sent: Friday, April 05, 2002 3:10 PM
Subject: Re: [LARTC] htb ceiling
Quoted 11 lines
you have error in conf. As you can see class 1:40 and 1:50 are added to the root not as 1:2 children.
The output of htb.init is wrong - you can see that it uses 1:2 class before it demands its create ...
I don't know htb.init - you will have to contact maintainer with bugrerport probably ;)
devikQuoted 1 line · Gavin
I tried it with a minimal config - two classes, each with rate: 256Kbit
and
Quoted 2 lines
Quoted 2 lines
ceiling: 512Kbit and one dest. IP address in each, as well as a default class. Each specified machine could only pull 256Kbit maximum, either
alone
Quoted 22 lines
Quoted 22 lines
or with the other downloading as well.
Output of tc -s qdisc show dev eth1:
qdisc sfq 50: quantum 1514b perturb 10sec
Sent 7506464 bytes 4984 pkts (dropped 0, overlimits 0) backlog 6pqdisc sfq 40: quantum 1514b perturb 10sec Sent 4275617 bytes 2829 pkts (dropped 0, overlimits 0) backlog 3p
qdisc sfq 10: quantum 1514b perturb 10sec Sent 287102 bytes 542 pkts (dropped 0, overlimits 0)
qdisc htb 1: r2q 100 default 10 dcache 0
deq_util1/1000000deq_rate125trials_per_deq0dcache_hits0direct_packets0
Sent 12069183 bytes 8355 pkts (dropped 0, overlimits 15537) backlog 9p
Quoted 3 lines
Quoted 3 lines
Output of tc -s class show dev eth1:
class htb 1:10 root leaf 10: prio 0 rate 2Mbit ceil 2Mbit burst 15Kb
cburst
Quoted 27 lines
Quoted 27 lines
4220b
Sent 331368 bytes 678 pkts (dropped 0, overlimits 32) rate 107bps
lended: 678 borrowed: 0 giants: 0 injects: 0
tokens: 47825 ctokens: 13015class htb 1:2 root prio 0 rate 5Mbit ceil 5Mbit burst 15Kb cburst 8151b
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0 injects: 0
tokens: 19199 ctokens: 10190class htb 1:40 root leaf 40: prio 0 rate 256Kbit ceil 512Kbit burst 15Kb cburst 2254b
Sent 4275671 bytes 2830 pkts (dropped 0, overlimits 0)
rate 226bps
lended: 2830 borrowed: 0 giants: 0 injects: 0
tokens: 382801 ctokens: 27588class htb 1:50 root leaf 50: prio 0 rate 256Kbit ceil 512Kbit burst 15Kb cburst 2254b
Sent 8214460 bytes 5467 pkts (dropped 0, overlimits 0)
rate 546bps
lended: 5467 borrowed: 0 giants: 0 injects: 0
tokens: 382801 ctokens: 27588Output of htb.init compile:
Quoted 8 lines
Quoted 8 lines
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100tc class add dev eth1 parent 1:2 classid 1:10 htb rate 2Mbit ceil 2Mbit burst 15k
tc qdisc add dev eth1 parent 1:10 handle 10 sfq perturb 10tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit ceil
512Kbit
Quoted 6 lines
Quoted 6 lines
burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10 tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.20 classid 1:40tc class add dev eth1 parent 1:2 classid 1:50 htb rate 256Kbit ceil
512Kbit
Quoted 20 lines
Quoted 20 lines
burst 15k
tc qdisc add dev eth1 parent 1:50 handle 50 sfq perturb 10 tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.150 classid 1:50tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst 15k
Gavin
----- Original Message -----
From: "Martin Devera" <[email protected]>
To: "Stef Coene" <[email protected]>
Cc: "Gavin" <[email protected]>; <[email protected]>
Sent: Friday, April 05, 2002 1:40 PM
Subject: Re: [LARTC] htb ceiling
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100 tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst
15k
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit
ceil
Quoted 4 lines
Quoted 4 lines
512Kbit
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10 tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match
ip
Quoted 4 lines
Quoted 4 lines
dst
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
10.0.0.2 classid 1:40
- this allows 10.0.0.2 to download at 256Kbit, even when it is
the
Quoted 2 lines
Quoted 2 lines
only
Quoted 1 line
Quoted 1 line
Quoted 1 line
machine doing any downloading. I can affect this speed by
changing
Quoted 3 lines
Quoted 3 lines
the
Quoted 2 lines
Quoted 2 lines
Quoted 1 line
$rate, but changing $ceil has no effect whatsoever.
The ceil will prevent 10.0.0.2 to download faster then 512 kbit.
The
Quoted 2 lines
Quoted 2 lines
rate
Quoted 1 line
Quoted 1 line
will say how much 10.0.0.2 can download compare to the other classes
(so
Quoted 9 lines
Quoted 9 lines
the
Quoted 8 lines
Quoted 1 line
other lines are also relevant :).
No Stef,
the rate is really measured - it is used as source for DRR weight (here it is used relative to other classes) and to see whether we need to borrow from parent - here absolute value matters. So that the example above should work and give 512k.
Quoted 12 lines
Quoted 10 lines
Quoted 7 lines
Gavin, did you tried with only these classes present ? (to have maximaly simplified configuration which exhibits it). If yes and it really does only 256k then post
tc -s {qdisc,class} show dev ethXX outputs ... as usual devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines
Quoted 4 lines
the rate is really measured - it is used as source for DRR weight (here it is used relative to other classes) and to see whether we need to borrow from parent - here absolute value matters. So that the example above should work and give 512k.
So each class gets it's rate if it can by borrowing from the parent ? But what if the parent has more bandwidth then the rate of the classes? Isn't the remaining bandwith given to the classes compared with the rates ?
What happens of the sum of the rates of the child classes is bigger then the rate of the parent or even the ceil of the parent ?
You can view it as system where all of these hold:
1. each class first uses all of its (absolute) "rate"
2. if there is no such class then each class can use part of parents rate if ceil allows for it and
3. the "parts" of the same parent are balanced according to relative values of children rates
Now, Gavin's conf: C1[r,c 00]-->C2[r%6,cQ2] is simple to explain:
According to rule 1. C2 will always use at least 256k (even if C1's rate were accidentaly 0). If it already uses 256k and there is still demand for more then 2. allows you to use up to 512k. There is no competiting child of C1 so C2 will get 512k forever.
Clear ?
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 16 lines
You can view it as system where all of these hold:
1. each class first uses all of its (absolute) "rate"
2. if there is no such class then each class can use part of parents rate if ceil allows for it and
3. the "parts" of the same parent are balanced according to relative values of children ratesNow, Gavin's conf: C1[r,c=2000]-->C2[r=256,c=512] is simple to explain:
According to rule 1. C2 will always use at least 256k (even if C1's rate were accidentaly 0). If it already uses 256k and there is still demand for more then 2. allows you to use up to 512k. There is no competiting child of C1 so C2 will get 512k forever.
Quoted 1 line
Clear ?
Very clear :)
Thx
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Lubomir Bulej has now released v0.8.3 of his excellent htb.init script which fixes the problem with the ordering of the output.
Gavin
----- Original Message -----
From: "Martin Devera" <[email protected]>
To: "Gavin" <[email protected]>
Cc: "Stef Coene" <[email protected]>; <[email protected]>
Sent: Friday, April 05, 2002 3:10 PM
Subject: Re: [LARTC] htb ceiling
Quoted 11 lines
you have error in conf. As you can see class 1:40 and 1:50 are added to the root not as 1:2 children.
The output of htb.init is wrong - you can see that it uses 1:2 class before it demands its create ...
I don't know htb.init - you will have to contact maintainer with bugrerport probably ;)
devikQuoted 1 line · Gavin
I tried it with a minimal config - two classes, each with rate: 256Kbit
and
Quoted 2 lines
Quoted 2 lines
ceiling: 512Kbit and one dest. IP address in each, as well as a default class. Each specified machine could only pull 256Kbit maximum, either
alone
Quoted 22 lines
Quoted 22 lines
or with the other downloading as well.
Output of tc -s qdisc show dev eth1:
qdisc sfq 50: quantum 1514b perturb 10sec
Sent 7506464 bytes 4984 pkts (dropped 0, overlimits 0) backlog 6pqdisc sfq 40: quantum 1514b perturb 10sec Sent 4275617 bytes 2829 pkts (dropped 0, overlimits 0) backlog 3p
qdisc sfq 10: quantum 1514b perturb 10sec Sent 287102 bytes 542 pkts (dropped 0, overlimits 0)
qdisc htb 1: r2q 100 default 10 dcache 0
deq_util1/1000000deq_rate125trials_per_deq0dcache_hits0direct_packets0
Sent 12069183 bytes 8355 pkts (dropped 0, overlimits 15537) backlog 9p
Quoted 3 lines
Quoted 3 lines
Output of tc -s class show dev eth1:
class htb 1:10 root leaf 10: prio 0 rate 2Mbit ceil 2Mbit burst 15Kb
cburst
Quoted 27 lines
Quoted 27 lines
4220b
Sent 331368 bytes 678 pkts (dropped 0, overlimits 32) rate 107bps
lended: 678 borrowed: 0 giants: 0 injects: 0
tokens: 47825 ctokens: 13015class htb 1:2 root prio 0 rate 5Mbit ceil 5Mbit burst 15Kb cburst 8151b
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0 injects: 0
tokens: 19199 ctokens: 10190class htb 1:40 root leaf 40: prio 0 rate 256Kbit ceil 512Kbit burst 15Kb cburst 2254b
Sent 4275671 bytes 2830 pkts (dropped 0, overlimits 0)
rate 226bps
lended: 2830 borrowed: 0 giants: 0 injects: 0
tokens: 382801 ctokens: 27588class htb 1:50 root leaf 50: prio 0 rate 256Kbit ceil 512Kbit burst 15Kb cburst 2254b
Sent 8214460 bytes 5467 pkts (dropped 0, overlimits 0)
rate 546bps
lended: 5467 borrowed: 0 giants: 0 injects: 0
tokens: 382801 ctokens: 27588Output of htb.init compile:
Quoted 8 lines
Quoted 8 lines
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100tc class add dev eth1 parent 1:2 classid 1:10 htb rate 2Mbit ceil 2Mbit burst 15k
tc qdisc add dev eth1 parent 1:10 handle 10 sfq perturb 10tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit ceil
512Kbit
Quoted 6 lines
Quoted 6 lines
burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10 tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.20 classid 1:40tc class add dev eth1 parent 1:2 classid 1:50 htb rate 256Kbit ceil
512Kbit
Quoted 20 lines
Quoted 20 lines
burst 15k
tc qdisc add dev eth1 parent 1:50 handle 50 sfq perturb 10 tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst 10.0.0.150 classid 1:50tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst 15k
Gavin
----- Original Message -----
From: "Martin Devera" <[email protected]>
To: "Stef Coene" <[email protected]>
Cc: "Gavin" <[email protected]>; <[email protected]>
Sent: Friday, April 05, 2002 1:40 PM
Subject: Re: [LARTC] htb ceiling
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
tc qdisc add dev eth1 root handle 1 htb default 10 r2q 100 tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit burst
15k
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
tc class add dev eth1 parent 1:2 classid 1:40 htb rate 256Kbit
ceil
Quoted 4 lines
Quoted 4 lines
512Kbit
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
burst 15k
tc qdisc add dev eth1 parent 1:40 handle 40 sfq perturb 10 tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match
ip
Quoted 4 lines
Quoted 4 lines
dst
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
10.0.0.2 classid 1:40
- this allows 10.0.0.2 to download at 256Kbit, even when it is
the
Quoted 2 lines
Quoted 2 lines
only
Quoted 1 line
Quoted 1 line
Quoted 1 line
machine doing any downloading. I can affect this speed by
changing
Quoted 3 lines
Quoted 3 lines
the
Quoted 2 lines
Quoted 2 lines
Quoted 1 line
$rate, but changing $ceil has no effect whatsoever.
The ceil will prevent 10.0.0.2 to download faster then 512 kbit.
The
Quoted 2 lines
Quoted 2 lines
rate
Quoted 1 line
Quoted 1 line
will say how much 10.0.0.2 can download compare to the other classes
(so
Quoted 9 lines
Quoted 9 lines
the
Quoted 8 lines
Quoted 1 line
other lines are also relevant :).
No Stef,
the rate is really measured - it is used as source for DRR weight (here it is used relative to other classes) and to see whether we need to borrow from parent - here absolute value matters. So that the example above should work and give 512k.
Quoted 12 lines
Quoted 10 lines
Quoted 7 lines
Gavin, did you tried with only these classes present ? (to have maximaly simplified configuration which exhibits it). If yes and it really does only 256k then post
tc -s {qdisc,class} show dev ethXX outputs ... as usual devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/