prio/pref weirdness
Hi
I am playing with filters and cbq/htb and I have found this strange thing. Add some filters using the prio/pref (they seem an alias to me) parameter like:
tc filter add dev eth0 protocol ip parent 1: pref 5 u32 match ip dst 1.2.3.4 tc filter add dev eth0 protocol ip parent 1: pref 10 u32 match ip dst 2.3.4.5
And try tc filter show dev eth0, you will see that every filter you have is multiplied by the number of different prio/pref values you have used.
Thus it looks like you would do this:
tc filter add dev eth0 protocol ip parent 1: pref 5 u32 match ip dst 1.2.3.4 tc filter add dev eth0 protocol ip parent 1: pref 5 u32 match ip dst 2.3.4.5
tc filter add dev eth0 protocol ip parent 1: pref 10 u32 match ip dst 1.2.3.4 tc filter add dev eth0 protocol ip parent 1: pref 10 u32 match ip dst 2.3.4.5
Why is that? Is it a tc bug? Or is it normal? What it happens if I use filters of different pref/prio ? In which order are they checked ?
Thanks
----------------------------
Mihai RUSU
Disclaimer: Any views or opinions presented within this e-mail are solely those of the author and do not necessarily represent those of any company, unless otherwise specifically stated.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
It is bug I described a year ago. It is due to a bit ... weird system used in tc filters and u32. There is global table of all u32 hashed and it is looked up for each filter id - thus it will display them over and over ....
You can mitigate it by using "show pref N" so see only part you are interested in.
devik
Quoted 28 lines · Mihai RUSU
Hi
I am playing with filters and cbq/htb and I have found this strange thing. Add some filters using the prio/pref (they seem an alias to me) parameter like:
tc filter add dev eth0 protocol ip parent 1: pref 5 u32 match ip dst 1.2.3.4 tc filter add dev eth0 protocol ip parent 1: pref 10 u32 match ip dst 2.3.4.5And try tc filter show dev eth0, you will see that every filter you have is multiplied by the number of different prio/pref values you have used.
Thus it looks like you would do this:
tc filter add dev eth0 protocol ip parent 1: pref 5 u32 match ip dst 1.2.3.4 tc filter add dev eth0 protocol ip parent 1: pref 5 u32 match ip dst 2.3.4.5
tc filter add dev eth0 protocol ip parent 1: pref 10 u32 match ip dst 1.2.3.4 tc filter add dev eth0 protocol ip parent 1: pref 10 u32 match ip dst 2.3.4.5
Why is that? Is it a tc bug? Or is it normal? What it happens if I use filters of different pref/prio ? In which order are they checked ?
Thanks
----------------------------
Mihai RUSU
Quoted 9 lines
Disclaimer: Any views or opinions presented within this e-mail are solely those of the author and do not necessarily represent those of any company, unless otherwise specifically stated.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · Martin Devera
It is bug I described a year ago. It is due to a bit ... weird system used in tc filters and u32. There is global table of all u32 hashed and it is looked up for each filter id - thus it will display them over and over ....
You can mitigate it by using "show pref N" so see only part you are interested in.
devik
Thanks for the answer.
Now correct me if I got it right, what you said it is a tc bug? Because it looks for the filters like you said ? I mean the kernel doesnt have all those filters, right?
----------------------------
Mihai RUSU
Disclaimer: Any views or opinions presented within this e-mail are solely those of the author and do not necessarily represent those of any company, unless otherwise specifically stated.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines
Thanks for the answer.
Now correct me if I got it right, what you said it is a tc bug? Because it looks for the filters like you said ? I mean the kernel doesnt have all those filters, right?
well it is really bug in kernel in show part. But yes it is only cosmetic bug - kernel have only one copy of it. It only displays it more times.
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/