Skip to contentSkip to conversation

HTB & police filters

LARTC Mihai RUSU 2 participants 2 messages Apr 10, 2002

lore
Share & tools
lore

Mihai RUSU

author
#0 lore raw

Hi

Im playing with HTB and police filters. It seems that the drop action doesnt work with htb (I think it sends the traffic to the "default" configured class).

#!/bin/bash

tc=/sbin/tc

$tc qdisc del dev eth0 root
$tc qdisc add dev eth0 root handle 1: htb default 20

$tc class add dev eth0 parent 1: classid 1:1 htb rate 100Mbit burst 15k

$tc class add dev eth0 parent 1:1 classid 1:10 htb rate 128Kbit burst 15k $tc class add dev eth0 parent 1:1 classid 1:20 htb rate 256Kbit ceil 100Mbit burst 15k

$tc class add dev eth0 parent 1:10 classid 1:100 htb rate 64Kbit burst 15k $tc class add dev eth0 parent 1:10 classid 1:200 htb rate 128Kbit burst 15k

$tc filter add dev eth0 protocol ip parent 1: pref 5 u32 match ip dst \
1.2.3.4 flowid 1:200 police drop rate 64Kbit burst 15k

It seems that the filter matches the defined rate and calls enqueue() for class 1:200, but after that the overlimit traffic it sends to the "default" 1:20 defined htb class. If I want this I could use "continue" but NOT drop. Is this a bug? :)

----------------------------
Mihai RUSU

Disclaimer: Any views or opinions presented within this e-mail are solely those of the author and do not necessarily represent those of any company, unless otherwise specifically stated.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/