Skip to contentSkip to conversation

HTB-link sharing (borrowing) doesn't work - partially solved

LARTC Lumir Unzeitig 2 participants 2 messages Apr 18, 2002

lore
Share & tools
lore
#0 lore raw

Thanks for your help,
it's working with 110k for entire bandwidth and fluent downloading via ftp.

In real environment, one of the 2 classes is for terminal connections (Citrix-ICA protocol), therefore the load is not stepless and getting in ballance (according to classes) is not quick enough(= it's in my opinion, no practice tests).

Shall I speed up the time by any change in config script (different qdisc, smaller burst,....)?

Thanks
Lumir Unzeitig

Hi it seems as if there is something other throttling the data - is not it the case that you tested the downloads thru your 128k internet connection ? If yes then throttling is done at other side of line. The try to set BAND to 110k for example ...
devik

Quoted 11 lines · Lumir Unzeitig

Hello,

I want to set up typical scenario:
entire bandwith (128kbps from ISP) to devide to 2 parts:
1\traffic from special source IP address
2\ rest
Each part should be capable of "borrowing" from the other in case of less traffic on either side.

I set up according to the HTB manual using a u32 filter and all packets

are

Quoted 39 lines

properly divided according to the filter to classes ("Sent" bytes in stats increases).
But the "borrowing" doesn't work. I started 3 FTP sessions: 1 from the special IP address, 2 from other places. The 128k bandwitdth is not allocated in the right ratio according to HTB config but 1/2 as poor TCP sessions.
If I set up rateÎil (no borrowing) it works OK-every class has got the right part of bandwidth.

It's Linux router, kernel 2.4.16, eth2 is interface to internal firewall,

Can you tell me what's wrong?
Does anybody successfully use scenario with "borrowing" ? If yes, please, send me a script or info?

Thanks

Lumir Unzeitig

HTB config
*******************
BURST=2
BAND8 #kbps ISP bandwidth
BAND1 #kbps download from odysseus.fi.muni.cz
BAND2=$(($BAND-$BAND1)) #rest

#Root handle qdisc
#*****************
tc qdisc add dev eth2 root handle 1: htb default 200

#Root class for 128kbps
#**********************
tc class add dev eth2 parent 1: classid 1:1 htb \
rate ${BAND}kbit ceil ${BAND}kbit burst 2k

Quoted 6 lines

#Subclass 1:100 download from odysseus.fi.muni.cz

#-------------------------------------------------------------------------

      #Subclass definition
      tc class add dev eth2 parent 1:1 classid 1:100 htb \
                      rate ${BAND1}kbit ceil ${BAND}kbit burst

${BURST}kbit

Quoted 42 lines

#Filter
tc filter add dev eth2 parent 1: protocol ip prio 1 u32 match ip src 147.251.48.205/32 flowid 1:100

#qdisc - SFQ
tc qdisc add dev eth2 parent 1:100 handle 1000: sfq perturb 10

#Subclass 1:200 - rest
#--------------------------------
#Subclass definition
tc class add dev eth2 parent 1:1 classid 1:200 htb \
rate ${BAND2}kbit ceil ${BAND}kbit burst ${BURST}k

#qdisc - SFQ
tc qdisc add dev eth2 parent 1:200 handle 2000: sfq perturb 10
************************

HTB stats
*****************
---[ eth2: queueing disciplines ]-------------------------

qdisc sfq 2000: quantum 1514b limit 128p flows 128/1024 perturb 10sec
Sent 7383739 bytes 8792 pkts (dropped 0, overlimits 0)

qdisc sfq 1000: quantum 1514b limit 128p flows 128/1024 perturb 10sec Sent 3301615 bytes 2285 pkts (dropped 0, overlimits 0)

qdisc htb 1: r2q 10 default 200 dcache 0 deq_util 1/1000000 deq_rate 23 trials_per_deq 1 dcache_hits 0 direct_packets 0
Sent 10685354 bytes 11077 pkts (dropped 0, overlimits 0)

---[ eth2: configured classes ]--------------------------- class htb 1:1 root prio 0 rate 128Kbit ceil 128Kbit burst 2Kb/8 mpu 0b cburst 1762b/8 mpu 0b quantum 1638 level 3
Sent 10686868 bytes 11078 pkts (dropped 0, overlimits 0) rate 14044bps 10pps
lended: 2017 borrowed: 0 giants: 0 injects: 0
tokens: 26801 ctokens: 12550

Quoted 1 line

class htb 1:100 parent 1:1 leaf 1000: prio 0 rate 10Kbit ceil 128Kbit

burst

Quoted 7 lines

2Kb/8 mpu 0b cburst 1762b/8 mpu 0b quantum 128 level 0
Sent 3301615 bytes 2285 pkts (dropped 0, overlimits 0) rate 4393bps 2pps
lended: 500 borrowed: 1785 giants: 0 injects: 0
tokens: -829440 ctokens: 12550

class htb 1:200 parent 1:1 leaf 2000: prio 0 rate 118Kbit ceil 128Kbit

burst

Quoted 15 lines

2Kb/8 mpu 0b cburst 1762b/8 mpu 0b quantum 1510 level 0
Sent 7385253 bytes 8793 pkts (dropped 0, overlimits 0) rate 9658bps 8pps
lended: 8561 borrowed: 232 giants: 0 injects: 0
tokens: 11514 ctokens: 12550

---[ eth2: filters for classes ]---------------------------

filter parent 1: protocol ip pref 1 u32
filter parent 1: protocol ip pref 1 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:100
match 93fb30cd/ffffffff at 12

Quoted 7 lines

********************

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

RE: [LARTC] HTB-link sharing (borrowing) doesn't work - partially

Getting in ballance should be very quick. The decision is made ASAP the hi prio packet is ready. Don't forget to set lower prio number for your Citrix class.
devik

Quoted 15 lines

Thanks for your help,
it's working with 110k for entire bandwidth and fluent downloading via ftp.

In real environment, one of the 2 classes is for terminal connections (Citrix-ICA protocol), therefore the load is not stepless and getting in ballance (according to classes) is not quick enough(= it's in my opinion, no practice tests).

Shall I speed up the time by any change in config script (different qdisc, smaller burst,....)?

Thanks
Lumir Unzeitig

Quoted 5 lines

Hi it seems as if there is something other throttling the data - is not it the case that you tested the downloads thru your 128k internet connection ? If yes then throttling is done at other side of line. The try to set BAND to 110k for example ...

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/