IMQ & HTB problem
Hi everybody,
I have a strange problem. I recently found IMQ dummy device and I was anxious to test this on my router. I have the following configuration:
iptables -t mangle -A PREROUTING -i eth0 -m mark --mark 0 -d $MY_NET -j IMQ --todev 0
iptables -t mangle -A POSTROUTING -o eth0 -m mark --mark 0 -s $MY_NET -j IMQ --todev 1
insmod imq
tc qdisc add dev imq0 root handle 1: htb default fff tc qdisc add dev imq1 root handle 1: htb default fff
tc class add dev imq0 parent 1:0 classid 1:1 htb rate 192Kbit
...
tc filter add dev imq0 parent 1:0 protocol ip prio 100 u32 match ip src... bla bla bla
ip link set imq0 up; ip link set imq1 up
The problem is that when I run this script, those packets that are routed via imq* (0 for in and 1 for out) are slowed down to ridiculous speeds (1kbit or less for a 64kbit class for eg.)
I read about some bugs that lies in IMQ code but I also read about crashes related to this bugs and this is not my case.
Could anyone help me pls? I must finish this script till monday. Could it be usage of u32 filters? But still I see that packets are getting to the right classes.
Thanks,
Alin Nastac
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi !
Quoted 18 lines · Alin Nastac
Hi everybody,
I have a strange problem. I recently found IMQ dummy device and I was anxious to test this on my router. I have the following configuration:
iptables -t mangle -A PREROUTING -i eth0 -m mark --mark 0 -d $MY_NET -j IMQ --todev 0
iptables -t mangle -A POSTROUTING -o eth0 -m mark --mark 0 -s $MY_NET -j IMQ --todev 1insmod imq
tc qdisc add dev imq0 root handle 1: htb default fff tc qdisc add dev imq1 root handle 1: htb default fff
tc class add dev imq0 parent 1:0 classid 1:1 htb rate 192Kbit
...
Quoted 8 lines
tc filter add dev imq0 parent 1:0 protocol ip prio 100 u32 match ip src... bla bla bla
ip link set imq0 up; ip link set imq1 up
The problem is that when I run this script, those packets that are routed via imq* (0 for in and 1 for out) are slowed down to ridiculous speeds (1kbit or less for a 64kbit class for eg.)
In fact, packets aren't routed via imq but only enqueued/dequeued to the attached qdiscs. Please post your entire script because the error is most probably in there..
Quoted 2 lines
I read about some bugs that lies in IMQ code but I also read about crashes related to this bugs and this is not my case.
Glad to here that, although the bug is still present .. i haven't found the time to debug it but i'll probably get to it this week.
Bye,
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/