Skip to contentSkip to conversation

borrowing only from parent

LARTC Anton Yurchenko 3 participants 3 messages Apr 26, 2002

lore
Share & tools
lore
#0 lore raw

Hello,

for example I have a parent class 1:1 defined as:

tc qdisc add dev eth0 root handle 1: htb default 12

# shape at 15 kbit almost no borrowing and no bursts
tc class add dev eth0 parent 1: classid 1:1 htb rate 15kbit ceil 1kbit burst 1b cburst 1b
# and sibling classes
# shape at 5kbit and borrow up to 5 kbit no burst
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 5kbit ceil 5kbit burst 1b cburst 1b
# shape at 10kbit and borrow up to 10 kbit no burst
tc class add dev eth0 parent 1:1 classid 1:11 htb rate 10kbit ceil 10kbps burst 1b cburst 1b

I want 1:10 and 1:11 to be able to borrow only from 1:1 so that any one of them ( 1:10 or 1:10) go as high as 15kbit ( up to the max that 1:1 allows). But from testing that is not the situation. 1:11 goes at ~ 20kbit and 1:10 at ~ 10kbit when going at full speed at the same time. it looks like that they borrow not from 1:1. stats show from "tc -s -d class show" that they are not borrowing only lending. Are they cross lending or smthn?
Bottom line is I want to have a parent class with siblings that can borrow from each other but not more then the rate of the parent.

Am I doing somthing wrong?

Thanks,

Anton

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 10 lines · Anton Yurchenko

Hello,

for example I have a parent class 1:1 defined as:

tc qdisc add dev eth0 root handle 1: htb default 12

# shape at 15 kbit almost no borrowing and no bursts
tc class add dev eth0 parent 1: classid 1:1 htb rate 15kbit ceil 1kbit
burst 1b cburst 1b
Quoted 6 lines
# and sibling classes
# shape at 5kbit and borrow up to 5 kbit no burst
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 5kbit ceil 5kbit
burst 1b cburst 1b # shape at 10kbit and borrow up to 10 kbit no burst
tc class add dev eth0 parent 1:1 classid 1:11 htb rate 10kbit ceil 10kbps
burst 1b cburst 1b

Try ceil 15kbit for the class 1:10 and 1:11.
And 15kbit is a very low speed to shape at. Why are you doing so ? And you also typed kbps, but kbps = kilobyte/s = 8 kilobit/s = 8 kbit.

Stef

Signature · 7 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Anton Yurchenko

If you read the manual, the algorithm will not work correctly with {,c}burst < MTU ...
devik

Quoted 9 lines · Anton Yurchenko

Hello,

for example I have a parent class 1:1 defined as:

tc qdisc add dev eth0 root handle 1: htb default 12

# shape at 15 kbit almost no borrowing and no bursts
tc class add dev eth0 parent 1: classid 1:1 htb rate 15kbit ceil 1kbit burst 1b cburst 1b

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/