Skip to contentSkip to conversation

Problem with 2 DSL lines

LARTC [email protected] 1 participant 3 messages Apr 27, 2002 – May 1, 2002

lore
Share & tools
lore
#0 lore raw

Hey..

I have 2 DSL lines both going into Linux.

I followed the HOWTO for Split Access at
http://lartc.org/HOWTO//cvs/2.4routing/html/x247.html#AEN251

I have the following:

I have 5 IPs on eth0 for DSL line #1.
I have 1 IP on eth2 for DSL line #2.

192.168.0.0/24 is my local lan. I have iptables setup to SNAT to eth2 for this local lan.

Everything seems to work great except if I want to access any of the IPs on eth0 from the local lan. I do a traceroute and it just hangs on the 1st hop.

The default is via the gateway of DSL line #2.

Any ideas?

Thanks...

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

I'd like to add to this.

From the local lan, I can't access either of the external interfaces(DSL #1, or DSL #2).

Thanks,

Eric

Quoted 26 lines · On Fri, 26 Apr 2002 [email protected] wrote:

Hey..

I have 2 DSL lines both going into Linux.

I followed the HOWTO for Split Access at
http://lartc.org/HOWTO//cvs/2.4routing/html/x247.html#AEN251

I have the following:

I have 5 IPs on eth0 for DSL line #1.
I have 1 IP on eth2 for DSL line #2.

192.168.0.0/24 is my local lan. I have iptables setup to SNAT to eth2 for this local lan.

Everything seems to work great except if I want to access any of the IPs on eth0 from the local lan. I do a traceroute and it just hangs on the 1st hop.

The default is via the gateway of DSL line #2.

Any ideas?

Quoted 9 lines

Thanks...

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to [email protected]

I am going to answer with the solution to this.

I actually followed http://www.linuxvirtualserver.org/~julian/nano.txt
(Thanks Julian) and now everything works great.

Well almost, can't actually hit the server with 192.168.0.1(Internal iface ip of linux box) but that is fine with me.

Maybe the HOWTO on lartc.org for split access should be updated?

Thanks again,

Eric

Quoted 43 lines · On Sun, 28 Apr 2002 [email protected] wrote:

I'd like to add to this.

Quoted 1 line

From the local lan, I can't access either of the external interfaces(DSL

#1, or DSL #2).

Thanks,

Eric

Quoted 31 lines · On Fri, 26 Apr 2002 [email protected] wrote:

Hey..

I have 2 DSL lines both going into Linux.

I followed the HOWTO for Split Access at
http://lartc.org/HOWTO//cvs/2.4routing/html/x247.html#AEN251

I have the following:

I have 5 IPs on eth0 for DSL line #1.
I have 1 IP on eth2 for DSL line #2.

192.168.0.0/24 is my local lan. I have iptables setup to SNAT to eth2 for this local lan.

Everything seems to work great except if I want to access any of the IPs on eth0 from the local lan. I do a traceroute and it just hangs on the 1st hop.

The default is via the gateway of DSL line #2.

Any ideas?

Thanks...

Quoted 9 lines
Quoted 4 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/