sysctl & rp_filter (fwd)
Hi all !
I noticed a small (typo?) error in section "13.1. Reverse Path Filtering", which says:
Signature · 3 lines
The following fragment will turn this on for all current and future interfaces. # for i in /proc/sys/net/ipv4/conf/*/rp_filter ; do
Quoted 2 lines
echo 2 > $i
done
Signature · 32 lines
According to /usr/src/linux/Documentation/networking/ip-sysctl.txt ,
there should be "echo 1 > $i", because the ip-sysctl.txt says:
--
rp_filter - BOOLEAN
1 - do source validation by reversed path, as specified in RFC1812
Recommended option for single homed hosts and stub network
routers. Could cause troubles for complicated (not loop free)
networks running a slow unreliable protocol (sort of RIP),
or using static routes.
0 - No source validation.
Default value is 0. Note that some distributions enable it
in startip scripts.
--
Also, according to my personal experience, Reverse Path filtering
doesn't work with "echo 2 > $i".
--
.----------------------------------------------------------------------------.
| Pozdrav / Best Wishes, [email protected] | LL The Choice of |
| Dragan Simic RS.BA Hostmaster | LL GNU |
| URC B.Luka / RSKoming.NET System/Network Admin | LLLL i n u x Generation |
`----------------------------------------------------------------------------'
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/Quoted 5 lines · Dragan Simic
Hi all !
I noticed a small (typo?) error in section "13.1. Reverse Path Filtering", which says:
Arent't there kernels which support '2' as well? I would like to expand it then to cover what '2' is.
Regards,
bert
Signature · 6 lines
http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk http://lartc.org Linux Advanced Routing & Traffic Control HOWTO _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · bert hubert
Quoted 5 lines · Dragan Simic
Hi all !
I noticed a small (typo?) error in section "13.1. Reverse Path Filtering", which says:
Arent't there kernels which support '2' as well? I would like to expand it then to cover what '2' is.
Ok, there aren't :-)
I've changed it:
http://lartc.org/HOWTO//cvs/2.4routing/html/c1182.html#AEN1188
And added you to the 'thanks to' list.
Regards,
bert
Signature · 6 lines
http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk http://lartc.org Linux Advanced Routing & Traffic Control HOWTO _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/