howto spare the "tc filter" - lines with htb
Quoted 7 lines
Quoted 2 lines
As far as I understood Devik, this should look like:
tc filter add dev imq1 parent 10:0 protocol ip prio 1 handle 1 fwoutput:
"RTNETLINK answers: Invalid argument"
i can try this in whatever stage of my script (before iptables, after qdiscs and classes, whatever), it's always that "answer" :)
You have to remove the handle parameter. That parameter = mark, so marking with 20 will put the packets in 10:20.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi,
recently Martin explained, how to avoid these "tc filter" lines in our scripts.
unfortunatly it doesn't work with my setup.
i add a "dummy" tc filter - line:
tc filter add dev imq1 parent 10:0 protocol ip prio 1 handle 1 fw classid 10:10
which of course works, but i have no fwmark "1", but as i thought it's just a "dummy" -line for tc filter to work, i gues/think that's ok.
further i just set marks with iptables, and generate the right qdiscs/classes for them:
ack=0x00100010 # for classid 10:10
high=0x00100011 # 10:11
norm=0x00100012 # and so
low=0x00100013 # on
but it doesn't work :(
am i missing something?! i gues it's the "not-really-dummy" tc-filter line ?! :)
thank you very much
Tobias
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi :)
Quoted 12 lines · Tobias Geiger
Hi,
recently Martin explained, how to avoid these "tc filter" lines in our scripts.
unfortunatly it doesn't work with my setup.
i add a "dummy" tc filter - line:tc filter add dev imq1 parent 10:0 protocol ip prio 1 handle 1 fw classid 10:10
which of course works, but i have no fwmark "1", but as i thought it's just a "dummy" -line for tc filter to work, i gues/think that's ok.
Quoted 8 lines
further i just set marks with iptables, and generate the right qdiscs/classes for them:
ack=0x00100010 # for classid 10:10
high=0x00100011 # 10:11
norm=0x00100012 # and so
low=0x00100013 # on
I guess the problem are the encoded id's, in my opinion they have to be calculated like this:
(classid << 16) + leafid
So 10:10 would translate to 655370 decimal or 0xa000a hex.
bye,
patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 25 lines · Patrick McHardy
Hi :)
Quoted 13 lines · Tobias Geiger
Hi,
recently Martin explained, how to avoid these "tc filter" lines in our scripts.
unfortunatly it doesn't work with my setup.
i add a "dummy" tc filter - line:tc filter add dev imq1 parent 10:0 protocol ip prio 1 handle 1 fw classid 10:10
which of course works, but i have no fwmark "1", but as i thought it's just a "dummy" -line for tc filter to work, i gues/think that's ok.
Quoted 8 lines
further i just set marks with iptables, and generate the right qdiscs/classes for them:
ack=0x00100010 # for classid 10:10
high=0x00100011 # 10:11
norm=0x00100012 # and so
low=0x00100013 # on
Quoted 9 lines
I guess the problem are the encoded id's, in my opinion they have to be calculated like this:
(classid << 16) + leafid
So 10:10 would translate to 655370 decimal or0xa000ahex.bye,
patrick
hi patrick :)
hmm. here's a posting from martin:
--------------------------------
> > You can use only one
> > tc filter add dev ppp0 parent 1: protocol ip prio 1 handle 1 fw > >
> > and set classid directly in iptables like:
> > iptables -t mangle -A to-dsl -p tcp --dport 80 -j MARK --set-mark 0x10010 > > iptables -t mangle -A to-dsl -p tcp --sport 24 -j MARK --set-mark 0x10020 > >
> > and so on ..
> > devik
> Thx.
> Even I 'm learning from this list :)
> But how do you translate xx:xx to HEX ?
handle numbers in tc ARE in hex, so that:
... classid a23f:334d
can be written as --set-mark 0xa23f334d
devik
--------------------------------------------
but nevertheless i tried to convert the classid's to hex ... no success :(
Greetings
Tobias
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello Tobias!
Quoted 4 lines
unfortunatly it doesn't work with my setup.
i add a "dummy" tc filter - line:tc filter add dev imq1 parent 10:0 protocol ip prio 1 handle 1 fw classid
10:10
As far as I understood Devik, this should look like:
tc filter add dev imq1 parent 10:0 protocol ip prio 1 handle 1 fw
So no classid term (makes sense, since the classid term is incorporated into the --mark statement).
Greetings Nils
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · Nils Lichtenfeld
Hello Tobias!
Hello Nils,
Quoted 8 lines
Quoted 4 lines
unfortunatly it doesn't work with my setup.
i add a "dummy" tc filter - line:tc filter add dev imq1 parent 10:0 protocol ip prio 1 handle 1 fw classid
10:10
As far as I understood Devik, this should look like:
tc filter add dev imq1 parent 10:0 protocol ip prio 1 handle 1 fw
output:
"RTNETLINK answers: Invalid argument"
i can try this in whatever stage of my script (before iptables, after qdiscs and classes, whatever), it's always that "answer" :)
Quoted 3 lines
So no classid term (makes sense, since the classid term is incorporated into the --mark statement).
yes, i thought so too. that's why i wanted to call it "dummy"-line :)
Quoted 3 lines
Greetings Nils
Greetings Tobias
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/