Skip to contentSkip to conversation

How to compile only HTB?

LARTC Nils Lichtenfeld 2 participants 4 messages Apr 30, 2002 – May 1, 2002

lore
Share & tools
lore
#1 lore raw

And reason ? dep is needed only once on fresh source tree. Durin htb developement I use "make _mod_net" which recompiles only network modules and then "insmod net/sched/sch_htb.o" to test it. For quick compile test you can make net/sched/sch_htb.o (but it will not load as module then).
devik

Quoted 8 lines · Nils Lichtenfeld

Hello!

When I complie HTB I normaly do this:

- make dep
- make modules
- make modules-install

Quoted 10 lines

But that compiles all modules. Is it possible to have only HTB compile? Do I need "make-dep"?

Greetings, Nils

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Nils Lichtenfeld

Hello Devik!

Quoted 6 lines · Martin Devera

And reason ? dep is needed only once on fresh source tree. Durin htb developement I use "make _mod_net" which recompiles only network modules and then "insmod net/sched/sch_htb.o" to test it. For quick compile test you can make net/sched/sch_htb.o (but it will not load as module then).
devik

Thank you! Very nice, just what I have searched for. This just makes the whole procedure mutch faster.

"dep is needed only once on fresh source tree", does that mean, after applieing the HTB-patch, you have to issue a "make dep"?

Greetings, Nils

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Nils Lichtenfeld

:) good question ! Probably yes althought I'm not sure here

Quoted 10 lines · Nils Lichtenfeld

Hello Devik!

Quoted 6 lines · Martin Devera

And reason ? dep is needed only once on fresh source tree. Durin htb developement I use "make _mod_net" which recompiles only network modules and then "insmod net/sched/sch_htb.o" to test it. For quick compile test you can make net/sched/sch_htb.o (but it will not load as module then).
devik

Quoted 10 lines

Thank you! Very nice, just what I have searched for. This just makes the whole procedure mutch faster.

"dep is needed only once on fresh source tree", does that mean, after applieing the HTB-patch, you have to issue a "make dep"?

Greetings, Nils

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/