htb & filter on classes
I am trying to do some simple filtering with htb and the following class hierarchy:
1:
|
1:10
/ \
1:100 1:200
/ \1:1000 ...
Internal traffic should go to 1:200 and external traffic to 1:100 with further distinction based on dst ip made there.
The problem is that I just don't get the second distinction (filter on class 1:100) right. I have not found any working example where filters were not attached to qdiscs but on classes instead. Is it possible to do so? If yes:
am I using the right syntax (parent 1:100)?
The packets just get dropped in class 1:100 although the filter should definitely match and enqueue them into 1:1000.
Is there anything like a default filter on class basis which always matches or do I have to use something like "match ip dst 0.0.0.0/0"?
Here are the commands I'm using:
##########
tc qdisc add dev eth1 root handle 1: htb default 100
tc class add dev eth1 parent 1: classid 1:10 htb rate 10mbit ceil 10mbit burst 20k
# external traffic tc class add dev eth1 parent 1:10 classid 1:100 htb rate 1mbit ceil 1mbit burst 10k
# internal traffic tc class add dev eth1 parent 1:10 classid 1:200 htb rate 9mbit ceil 9mbit burst 10k
tc class add dev eth1 parent 1:100 classid 1:1000 htb rate 0.5mbit ceil 0.5mbit burst 2k prio 10
# filters tc filter add dev eth1 pref 1 protocol ip parent 1: u32 match ip src 195.58.166.176/28 flowid 1:200 tc filter add dev eth1 pref 1 protocol ip parent 1:100 u32 match ip dst 195.58.0.0/16 flowid 1:1000 ##########
Many thanks in advance,
Andreas Lehrbaum
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · 0On Tuesday 30 April 2002 01:11, [email protected] wrote:
I am trying to do some simple filtering with htb and the following class hierarchy:
1: 1:10 / \ 1:100 1:200 / \
Quoted 8 lines
1:1000 ...
Internal traffic should go to 1:200 and external traffic to 1:100 with further distinction based on dst ip made there.
The problem is that I just don't get the second distinction (filter on class 1:100) right. I have not found any working example where filters were not attached to qdiscs but on classes instead. Is it possible to do so? If
yes: am I using the right syntax (parent 1:100)?
The syntax is OK. But I don't think htb can do this (yet). Devik ?
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
You have to use dst 0.0.0.0/0 to direct "other" flows to 1:100. The default kw has global and definitive meaning - when it is used no other filter is tested. Whe default is 100 is will not test filters here. It is by-design, it could be changed but use dst 0.0.0.0/0 flowid 1:100 now.
devik
Quoted 49 lines · On Tue, 30 Apr 2002 [email protected] wrote:
I am trying to do some simple filtering with htb and the following class hierarchy:
1: | 1:10 / \ 1:100 1:200 / \1:1000 ...
Internal traffic should go to 1:200 and external traffic to 1:100 with further distinction based on dst ip made there.
The problem is that I just don't get the second distinction (filter on class 1:100) right. I have not found any working example where filters were not attached to qdiscs but on classes instead. Is it possible to do so? If yes:
am I using the right syntax (parent 1:100)?The packets just get dropped in class 1:100 although the filter should definitely match and enqueue them into 1:1000.
Is there anything like a default filter on class basis which always matches or do I have to use something like "match ip dst 0.0.0.0/0"?
Here are the commands I'm using:
##########
tc qdisc add dev eth1 root handle 1: htb default 100
tc class add dev eth1 parent 1: classid 1:10 htb rate 10mbit ceil 10mbit burst 20k# external traffic tc class add dev eth1 parent 1:10 classid 1:100 htb rate 1mbit ceil 1mbit burst 10k# internal traffic tc class add dev eth1 parent 1:10 classid 1:200 htb rate 9mbit ceil 9mbit burst 10ktc class add dev eth1 parent 1:100 classid 1:1000 htb rate 0.5mbit ceil 0.5mbit burst 2k prio 10
# filters tc filter add dev eth1 pref 1 protocol ip parent 1: u32 match ip src 195.58.166.176/28 flowid 1:200 tc filter add dev eth1 pref 1 protocol ip parent 1:100 u32 match ip dst 195.58.0.0/16 flowid 1:1000 ##########
Quoted 8 lines
Many thanks in advance,
Andreas Lehrbaum
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/