Skip to contentSkip to conversation

cbq with cbq as subclasses does not work for me. Help!

LARTC Jinyou Zhang 3 participants 4 messages May 1, 2002 – May 3, 2002

lore
Share & tools
lore
#0 lore raw

HI there,

I am running the following script for my test bed. It can run without any errors. The problem is when I run netperf with TCP to 192.168.11.58, there is no bandwidth limitation.

Is there any thing wrong with the script? Please take a look for me!

Thanks,

--Jinyou Z.

=================================
tc qdisc add dev eth0 root handle 1: cbq bandwidth 100Mbit allot 1514 cell 8 avpkt 1000 mpu 64

tc class add dev eth0 parent 1: classid 1:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 cell 8 avpkt 1000 weight 10Mbit prio 5 maxburst 20

tc class add dev eth0 parent 1:1 classid 1:2 cbq bandwidth 100Mbit rate 20Mbit allot 1514 cell 8 avpkt 1000 weight 2Mbit prio 5 maxburst 20

tc qdisc add dev eth0 parent 1:2 handle 2: cbq bandwidth 20Mbit allot 1514 cell 8 avpkt 1000 mpu 64

tc class add dev eth0 parent 2: classid 2:1 cbq bandwidth 20Mbit rate 20Mbit allot 1514 cell 8 avpkt 1000 weight 2000Kbit prio 5 maxburst 20

tc class add dev eth0 parent 2:1 classid 2:2 cbq bandwidth 20Mbit rate 10Mbit weight 1000Kbit allot 1514 cell 8 avpkt 1000 prio 5 maxburst 20

tc class add dev eth0 parent 2:1 classid 2:3 cbq bandwidth 20Mbit rate 5Mbit weight 500Kbit allot 1514 cell 8 avpkt 1000 prio 2 maxburst 20

tc filter add dev eth0 parent 2:0 protocol ip prio 10 u32 match ip dst 192.168.11.58 match ip protocol 6 0xff flowid 2:2

tc filter add dev eth0 parent 2:0 protocol ip prio 10 u32 match ip dst 192.168.11.58 match ip protocol 17 0xff flowid 2:3
=================================

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hello

Check with bounded option

Regards
Vanitha
----- Original Message -----
From: "Jinyou Zhang" <[email protected]>
To: <[email protected]>
Sent: Wednesday, May 01, 2002 10:21 PM
Subject: [LARTC] cbq with cbq as subclasses does not work for me. Help!

Quoted 38 lines

HI there,

I am running the following script for my test bed. It can run without any errors. The problem is when I run netperf with TCP to 192.168.11.58, there is no bandwidth limitation.

Is there any thing wrong with the script? Please take a look for me!

Thanks,

--Jinyou Z.

=================================
tc qdisc add dev eth0 root handle 1: cbq bandwidth 100Mbit allot 1514 cell 8 avpkt 1000 mpu 64

tc class add dev eth0 parent 1: classid 1:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 cell 8 avpkt 1000 weight 10Mbit prio 5 maxburst 20

tc class add dev eth0 parent 1:1 classid 1:2 cbq bandwidth 100Mbit rate 20Mbit allot 1514 cell 8 avpkt 1000 weight 2Mbit prio 5 maxburst 20

tc qdisc add dev eth0 parent 1:2 handle 2: cbq bandwidth 20Mbit allot 1514 cell 8 avpkt 1000 mpu 64

tc class add dev eth0 parent 2: classid 2:1 cbq bandwidth 20Mbit rate 20Mbit allot 1514 cell 8 avpkt 1000 weight 2000Kbit prio 5 maxburst 20

tc class add dev eth0 parent 2:1 classid 2:2 cbq bandwidth 20Mbit rate 10Mbit weight 1000Kbit allot 1514 cell 8 avpkt 1000 prio 5 maxburst 20

tc class add dev eth0 parent 2:1 classid 2:3 cbq bandwidth 20Mbit rate 5Mbit weight 500Kbit allot 1514 cell 8 avpkt 1000 prio 2 maxburst 20

tc filter add dev eth0 parent 2:0 protocol ip prio 10 u32 match ip dst 192.168.11.58 match ip protocol 6 0xff flowid 2:2

Quoted 7 lines

tc filter add dev eth0 parent 2:0 protocol ip prio 10 u32 match ip dst 192.168.11.58 match ip protocol 17 0xff flowid 2:3 =================================>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Jinyou Zhang

Hi Vanitha,

Thanks for the help! It is still not working.

I have changed the following line and added the

tc class add dev eth0 parent 1:1 classid 1:2 cbq bandwidth 100Mbit rate 20Mbit allot 1514 cell 8 avpkt 1000 weight 2Mbit prio 5 maxburst 20 bounded

Here is the the results of "tc -s -s class sh dev eth0":

---------------------------------------------------------------------
class cbq 2: root rate 20Mbit (bounded,isolated) prio no-transmit Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 312 undertime 0
class cbq 2:1 parent 2: rate 20Mbit prio 5
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 312 undertime 0
class cbq 2:2 parent 2:1 rate 10Mbit (bounded) prio 5 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 8869 undertime 0
class cbq 2:3 parent 2:1 rate 5Mbit (bounded) prio 2 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 26608 undertime 0
class cbq 1: root rate 100Mbit (bounded,isolated) prio no-transmit Sent 444486549 bytes 298006 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 62 undertime 0
class cbq 1:1 parent 1: rate 100Mbit prio 5
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 62 undertime 0
class cbq 1:2 parent 1:1 leaf 2: rate 20Mbit (bounded) prio 5 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 7095 undertime 0
----------------------------------------------------------------------

Instead of flowid 2:2, all traffics went to root 1:0. Maybe, my filters are not correct. ??

Thanks,

--Jinyou Z

Quoted 56 lines · Vanitha

Hello

Check with bounded option

Regards
Vanitha
----- Original Message -----
From: "Jinyou Zhang" <[email protected]>
To: <[email protected]>
Sent: Wednesday, May 01, 2002 10:21 PM
Subject: [LARTC] cbq with cbq as subclasses does not work for me. Help!

Quoted 30 lines

HI there,

I am running the following script for my test bed. It can run without any errors. The problem is when I run netperf with TCP to 192.168.11.58, there is no bandwidth limitation.

Is there any thing wrong with the script? Please take a look for me!

Thanks,

--Jinyou Z.

==================================================================
tc qdisc add dev eth0 root handle 1: cbq bandwidth 100Mbit allot 1514 cell 8 avpkt 1000 mpu 64

tc class add dev eth0 parent 1: classid 1:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 cell 8 avpkt 1000 weight 10Mbit prio 5 maxburst 20

tc class add dev eth0 parent 1:1 classid 1:2 cbq bandwidth 100Mbit rate 20Mbit allot 1514 cell 8 avpkt 1000 weight 2Mbit prio 5 maxburst 20

tc qdisc add dev eth0 parent 1:2 handle 2: cbq bandwidth 20Mbit allot 1514 cell 8 avpkt 1000 mpu 64

tc class add dev eth0 parent 2: classid 2:1 cbq bandwidth 20Mbit rate 20Mbit allot 1514 cell 8 avpkt 1000 weight 2000Kbit prio 5 maxburst 20

tc class add dev eth0 parent 2:1 classid 2:2 cbq bandwidth 20Mbit rate 10Mbit weight 1000Kbit allot 1514 cell 8 avpkt 1000 prio 5 maxburst 20

tc class add dev eth0 parent 2:1 classid 2:3 cbq bandwidth 20Mbit rate 5Mbit weight 500Kbit allot 1514 cell 8 avpkt 1000 prio 2 maxburst 20

tc filter add dev eth0 parent 2:0 protocol ip prio 10 u32 match ip dst 192.168.11.58 match ip protocol 6 0xff flowid 2:2

Quoted 8 lines

tc filter add dev eth0 parent 2:0 protocol ip prio 10 u32 match ip dst 192.168.11.58 match ip protocol 17 0xff flowid 2:3
===================================================================

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Jinyou Zhang
Quoted 17 lines
Quoted 17 lines

=================================
tc qdisc add dev eth0 root handle 1: cbq bandwidth 100Mbit allot 1514 cell 8 avpkt 1000 mpu 64

tc class add dev eth0 parent 1: classid 1:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 cell 8 avpkt 1000 weight 10Mbit prio 5 maxburst 20

tc class add dev eth0 parent 1:1 classid 1:2 cbq bandwidth 100Mbit rate 20Mbit allot 1514 cell 8 avpkt 1000 weight 2Mbit prio 5 maxburst 20

tc qdisc add dev eth0 parent 1:2 handle 2: cbq bandwidth 20Mbit allot 1514 cell 8 avpkt 1000 mpu 64

tc class add dev eth0 parent 2: classid 2:1 cbq bandwidth 20Mbit rate 20Mbit allot 1514 cell 8 avpkt 1000 weight 2000Kbit prio 5 maxburst 20

Quoted 8 lines
Quoted 8 lines

tc class add dev eth0 parent 2:1 classid 2:2 cbq bandwidth 20Mbit rate 10Mbit weight 1000Kbit allot 1514 cell 8 avpkt 1000 prio 5 maxburst 20

tc class add dev eth0 parent 2:1 classid 2:3 cbq bandwidth 20Mbit rate 5Mbit weight 500Kbit allot 1514 cell 8 avpkt 1000 prio 2 maxburst 20

tc filter add dev eth0 parent 2:0 protocol ip prio 10 u32 match ip

dst 192.168.11.58 match ip protocol 6 0xff flowid 2:2

===========> parent 1:0

Quoted 1 line
Quoted 1 line

tc filter add dev eth0 parent 2:0 protocol ip prio 10 u32 match ip

dst 192.168.11.58 match ip protocol 17 0xff flowid 2:3

===========> parent 1:0

hope this works !!..works for me !! :)

are u working with 1 ether port only ??

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/