Skip to contentSkip to conversation

Routing to virtual interfaces

LARTC Joshua Daniel Franklin 1 participant 1 message May 9, 2002

lore
Share & tools
lore
#0 lore raw

Hi. I asked this question on the linuxmanagers list, and the only helpful response I got was to ask this list. :) So:

I've got a server with eth0 and eth0:0 (and other interfaces, but that's not important right now). Sometimes outgoing connections show up as coming from the IP address of eth0, sometimes from eth0:0. Here are the interfaces:

eth0 Link encap:Ethernet HWaddr 00:B0:D0:FC:DC:88

          inet addr:12.41.224.2  Bcast:12.41.224.63  Mask:255.255.255.192
[...]
eth0:0    Link encap:Ethernet  HWaddr 00:B0:D0:FC:DC:88  
          inet addr:12.41.224.13  Bcast:12.41.224.63  Mask:255.255.255.192

And, for example, with SMTP, I've gotten these headers:

Received: from virtual.iocc.com (EHLO iocc.com) (12.41.224.13) by mta591.mail.yahoo.com with SMTP; 09 May 2002 07:22:12 -0700 (PDT)

But then with telnet (to a different machine):

May  9 09:32:22 jay xinetd[29016]: libwrap refused connection to telnet from 12.41.224.2

Can anyone tell me either how to get it always to use eth0, or why an interface is apparently chosen at random?

Signature · 7 lines
Joshua Daniel Franklin
Network Administrator
IOCC.COM

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/