ingress and egress
ingress can be used to control the incoming packet, such as:
tc qdisc add dev eth0 handle ffff: ingress
tc filter add dev eth0 parent ffff: protocol ip prio 5 u32 match ip src 172.16.1.11 police rate 10kbit burst 10k drop flowid :1
tc filter add dev eth0 parent ffff: protocol ip prio 5
u32 match ip src 172.16.1.22 police rate 10kbit burst 10k drop flowid :2
first ,I do not sure these method can use class(could it do? I tested it can not do). if it can do it ,please give me a example.
second, rate can not be shared, if i want to control the incoming packet rate not throug egress qdisc, and the rate can be shared, please tell me how can i do.
_________________________________________________________
Do You Yahoo!?
摊开你的掌心 让我看看你
http://sweepstakes.yahoo.com/2002cnuser
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · hanhbnetfilter
ingress can be used to control the incoming packet, such as:
tc qdisc add dev eth0 handle ffff: ingress
tc filter add dev eth0 parent ffff: protocol ip prio 5 u32 match ip src 172.16.1.11 police rate 10kbit burst 10k drop flowid :1
tc filter add dev eth0 parent ffff: protocol ip prio 5
Quoted 5 lines
u32 match ip src 172.16.1.22 police rate 10kbit burst 10k drop flowid :2
first ,I do not sure these method can use class(could it do? I tested it can not do). if it can do it ,please give me a example.
Ingress qdisc is classless.
Quoted 3 lines
second, rate can not be shared, if i want to control the incoming packet rate not throug egress qdisc, and the rate can be shared, please tell me how can i do.
You can use use the imq device. You can redirect packets (incoming and outgoing) to this device. And you can attach CBQ or HTB to this device. A link can be found on www.docum.org under faq.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
You can't shared bandwidth in ingress and you can't add classes (ingress classless) tc qdisc add dev eth0 handle ffff:fff1 ingress
tc filter add dev eth0 parent ffff:fff1 protocol ip prio 49 u32 match ip dport 22 0xffff \
police rate 1mbps burst 100k drop flowid :1
tc filter add dev eth0 parent ffff:fff1 protocol ip prio 50 u32 match ip src 0.0.0.0/0 \
police rate 2mbps burst 100k drop flowid :1
it's allocate 1 mbps for ssh and 2 mbps for other even you upload at the same time (hardware speed more then 3 mbps) i.e. prio don't help you :((
But you may use imq see: http://luxik.cdi.cz/~patrick/imq/ patch kernel iptables and redirect with iptables (in mangle table) packets to imq0 and furthure use tbf htb and other\
Some notes:
Instances by queuing disciplines are identified by 32 bit numbers, which are split into major and minor number (16 bit each)Major number assigned by the user should be in range 1...0x7fff, 0x8000...0xffff automatically allocated by the kernel for qdisc with unspecified major number. Major number ffff:fff0 to ffff:ffff are reserved or have special meaning ffff:fff1 for ingress ffff:ffff selects top-level egress queuing discipline of an interface (special values are defined in include/linux/pkt_sched.h and have names begining with TC_H_)
For detail see: Linux Network Traffic Control - Implementation Overview
Werner Almesberger Feb 4 2001
Quoted 22 lines · hanhbnetfilter
ingress can be used to control the incoming packet, such as:
tc qdisc add dev eth0 handle ffff: ingress
tc filter add dev eth0 parent ffff: protocol ip prio 5 u32 match ip src 172.16.1.11 police rate 10kbit burst 10k drop flowid :1
tc filter add dev eth0 parent ffff: protocol ip prio 5u32 match ip src 172.16.1.22 police rate 10kbit burst 10k drop flowid :2
first ,I do not sure these method can use class(could it do? I tested it can not do). if it can do it ,please give me a example.
second, rate can not be shared, if i want to control the incoming packet rate not throug egress qdisc, and the rate can be shared, please tell me how can i do.
Quoted 8 lines
_________________________________________________________
Do You Yahoo!?
摊开你的掌心 让我看看你
http://sweepstakes.yahoo.com/2002cnuser
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
thanks for your help
I look at IMQ howto,if there is only two IMQ devices(imq0 imq1),I have three NIC on my computer, I want to
control all three NIC incoming rate,how can i do? Do IMQ support VPN?
--- Alexey Talikov <[email protected]>
的正文:> You can't shared bandwidth in ingress and you can't
Quoted 79 lines
add classes (ingress classless)
tc qdisc add dev eth0 handle ffff:fff1 ingress tc filter add dev eth0 parent ffff:fff1 protocol ip prio 49 u32 match ip dport 220xffff\
police rate 1mbps burst 100k drop flowid :1 tc filter add dev eth0 parent ffff:fff1 protocol ip prio 50 u32 match ip src 0.0.0.0/0 \
police rate 2mbps burst 100k drop flowid :1 it's allocate 1 mbps for ssh and 2 mbps for other even you upload at the same time
(hardware speed more then 3 mbps) i.e. prio don't help you :((
But you may use imq see:
http://luxik.cdi.cz/~patrick/imq/ patch kernel iptables and redirect
with iptables (in mangle table) packets to imq0 and furthure use tbf htb and other\Some notes:
Instances by queuing disciplines are identified by 32 bit numbers, which are split into
major and minor number (16 bit each)Major number assigned by the user should be in range 1...0x7fff, 0x8000...0xffff automatically allocated by the kernel for qdisc with unspecified major number. Major number ffff:fff0 to ffff:ffff are reserved or have special meaning ffff:fff1 for ingress ffff:ffff selects top-level egress queuing discipline of an interface (special values are defined ininclude/linux/pkt_sched.hand have names begining withTC_H_)
For detail see: Linux Network Traffic Control - Implementation Overview
Werner Almesberger Feb 4 200121.05.2002 6:31:25, hanhbnetfilter
Quoted 4 lines · <[email protected]> wrote:
ingress can be used to control the incoming packet, such as:
tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: protocol ipprio 5
Quoted 1 line
u32 match ip src 172.16.1.11 police rate 10kbit
burst
Quoted 2 lines
10k drop flowid :1
tc filter add dev eth0 parent ffff: protocol ipprio 5
Quoted 2 lines
u32 match ip src 172.16.1.22 police rate 10kbit
burst
Quoted 2 lines
10k drop flowid :2
first ,I do not sure these method can useclass(could
Quoted 3 lines
it do? I tested it can not do). if it can do it
,please give me a example.
second, rate can not be shared, if i want tocontrol
Quoted 1 line
the incoming packet rate not throug egress qdisc,
and
Quoted 1 line
the rate can be shared, please tell me how can i
do.
Quoted 6 lines
_________________________________________________________
Quoted 6 lines
Do You Yahoo!?
摊开你的掌心 让我看看你
http://sweepstakes.yahoo.com/2002cnuser
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartcHOWTO: http://lartc.org/
Quoted 1 line
Quoted 8 lines
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_________________________________________________________
Do You Yahoo!?
摊开你的掌心 让我看看你
http://sweepstakes.yahoo.com/2002cnuser
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi.
Quoted 6 lines · hanhbnetfilter
thanks for your help
I look at IMQ howto,if there is only two IMQ devices(imq0 imq1),I have three NIC on my computer, I want to
control all three NIC incoming rate,how can i do? Do IMQ support VPN?
The number of devices can be specified as module option (numdevs). IMQ works with any ip/ip6 protocol, so if by VPN you mean ipsec there should be no problem. A user reported a problem a short time ago with gre tunnels when the real data and the encapsulated data went to the same imq device, but i have no reports (positive or negative) for other kinds of tunnels. If you choose to try for yourself please let me know if it worked.
Bye,
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
You may route traffic from all devices to one imq and furthure control it by tc filter with mark or without it i.e. you may control traffic on two or more network devices (such ethx) simultaneous i.e. traffic traverse over eth0 and eth1 can't be more then 100kbps, for example
You may create more then two devices
modbrobe imq numdevs=3 (numdevs=1...16)
ip link set imq0 up
ip link set imq1 up
ip link set imq2 up
iptables -t mangle -A PREROUTING -i eth0 -j IMQ --todev 0 (to imq0) iptables -t mangle -A PREROUTING -i eth1 -j IMQ --todev 1 (to imq1) etc
also possible
iptables -t mangle -A POSTROUTING -o eth0 -j IMQ --todev 0 (to imq0) iptables -t mangle -A POSTROUTING -o eth1 -j IMQ --todev 1 (to imq1) traffic traverse to imq devices and furthure hit to the network devices
(sorry for my pure English)
Quoted 107 lines · hanhbnetfilter
thanks for your help
I look at IMQ howto,if there is only two IMQ devices(imq0 imq1),I have three NIC on my computer, I want to
control all three NIC incoming rate,how can i do? Do IMQ support VPN?--- Alexey Talikov <[email protected]> 的正文:> You can't shared bandwidth in ingress and you can't
Quoted 79 lines
add classes (ingress classless)
tc qdisc add dev eth0 handle ffff:fff1 ingress tc filter add dev eth0 parent ffff:fff1 protocol ip prio 49 u32 match ip dport 220xffff\
police rate 1mbps burst 100k drop flowid :1 tc filter add dev eth0 parent ffff:fff1 protocol ip prio 50 u32 match ip src 0.0.0.0/0 \
police rate 2mbps burst 100k drop flowid :1 it's allocate 1 mbps for ssh and 2 mbps for other even you upload at the same time
(hardware speed more then 3 mbps) i.e. prio don't help you :((
But you may use imq see:
http://luxik.cdi.cz/~patrick/imq/ patch kernel iptables and redirect
with iptables (in mangle table) packets to imq0 and furthure use tbf htb and other\Some notes:
Instances by queuing disciplines are identified by 32 bit numbers, which are split into
major and minor number (16 bit each)Major number assigned by the user should be in range 1...0x7fff, 0x8000...0xffff automatically allocated by the kernel for qdisc with unspecified major number. Major number ffff:fff0 to ffff:ffff are reserved or have special meaning ffff:fff1 for ingress ffff:ffff selects top-level egress queuing discipline of an interface (special values are defined ininclude/linux/pkt_sched.hand have names begining withTC_H_)
For detail see: Linux Network Traffic Control - Implementation Overview
Werner Almesberger Feb 4 200121.05.2002 6:31:25, hanhbnetfilter
Quoted 4 lines · <[email protected]> wrote:
ingress can be used to control the incoming packet, such as:
tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: protocol ipprio 5
Quoted 1 line
u32 match ip src 172.16.1.11 police rate 10kbit
burst
Quoted 2 lines
10k drop flowid :1
tc filter add dev eth0 parent ffff: protocol ipprio 5
Quoted 2 lines
u32 match ip src 172.16.1.22 police rate 10kbit
burst
Quoted 2 lines
10k drop flowid :2
first ,I do not sure these method can useclass(could
Quoted 3 lines
it do? I tested it can not do). if it can do it
,please give me a example.
second, rate can not be shared, if i want tocontrol
Quoted 1 line
the incoming packet rate not throug egress qdisc,
and
Quoted 1 line
the rate can be shared, please tell me how can i
do.
Quoted 6 lines
_________________________________________________________
Quoted 6 lines
Do You Yahoo!?
摊开你的掌心 让我看看你
http://sweepstakes.yahoo.com/2002cnuser
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartcHOWTO: http://lartc.org/
Quoted 1 line
Quoted 8 lines
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
Quoted 5 lines
_________________________________________________________
Do You Yahoo!?
摊开你的掌心 让我看看你
http://sweepstakes.yahoo.com/2002cnuser
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/