multiple ingresses
Is it possible to have multiple filters around an ingress so that you can police your downloads more specific. What I'm trying to achieve is to have all my ftp-traffic limited to 1024kbit on downloads. I included some commands below so that you might better understand my thoughts on the matter.
tc qdisc add dev eth0 root handle 1: htb default 2
tc class add dev eth0 parent 1: classid 1:1 htb rate 2048kbit ceil 2048kbit prio 1
tc class add dev eth0 parent 1:1 classid 1:2 htb prio 2 rate 1kbit ceil 2048kbit
tc qdisc add dev eth0 handle ffff: ingress
tc filter add dev eth0 parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 2048kbit burst 47.0kb drop flowid 1:
tc class add dev eth0 parent 1:1 classid 1:3 htb rate 1024kbit ceil 1024kbit prio 1
tc qdisc add dev eth0 parent 1:3 handle 3 sfq perturb 10
tc filter add dev eth0 parent 1:3 protocol ip u32 match ip dport 21 0xffff flowid 1:3
tc filter add dev eth0 parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 1024kbit burst 23.5kb drop flowid 1:3
Signature · 3 lines
Alexander Brill <[email protected]> http://www.project23.no PGP-key: http://alexb.egil.org/key.pub