Skip to contentSkip to conversation

htb faq

LARTC Julián Muñoz 3 participants 5 messages May 25, 2002 – May 27, 2002

lore
Share & tools
lore
#0 lore raw

What is the difference between burst and cburst parameter ?

Signature · 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw

cburst is for ceil rate and burst is for normal rate. or
rate has burst
ceil has cburst

probably it is not clear from the manual ?
devik

Quoted 9 lines · On Sat, 25 May 2002, [ISO-8859-1] Julián Muñoz wrote:

What is the difference between burst and cburst parameter ?

--

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Julián Muñoz
Quoted 6 lines · Martin Devera

cburst is for ceil rate and burst is for normal rate. or
rate has burst
ceil has cburst

probably it is not clear from the manual ?

No :-)

So it means that when traffic is borrowed cburst is used, else burst ?

Signature · 8 lines
Saludos de Julián
EA4ACL
-.-


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Julián Muñoz
Quoted 8 lines
Quoted 4 lines

rate has burst
ceil has cburst

probably it is not clear from the manual ?

No :-)

So it means that when traffic is borrowed cburst is used, else burst ?

Hmm .. do you understand the difference between ceil & rate ? Everytime when ceil is computed then cburst is used and vice versa .. Probably if you don't understand difference between bursts then you don't need them.

devik

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw
In reply to Julián Muñoz

See chapter 5 on http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm
The burst and cburst of a class should always be at least as high as that of any of it children The burst and cburst parameters control the amount of data that can be sent at the maximum (hardware) speed without trying to serve another class (cburst-ceil burst-rate) i.e. class borrowed on rate it used burst on ceil it used cburst
It possible in this case when ancestor borrwed all traffic from his descendant and ancestor of this ancestor borrowed all traffic from it
Any problem ???

Quoted 7 lines · Julián Muñoz
Quoted 5 lines · Martin Devera

cburst is for ceil rate and burst is for normal rate. or
rate has burst
ceil has cburst

Quoted 18 lines
Quoted 1 line

probably it is not clear from the manual ?

No :-)

So it means that when traffic is borrowed cburst is used, else burst ?

Signature · 8 lines
Saludos de Julián
EA4ACL
-.-


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/