Skip to contentSkip to conversation

htb3 with imq

LARTC Martin Devera 3 participants 5 messages May 27, 2002

lore
Share & tools
lore
#0 lore raw

Seems there is no imq.o file. I'm not sure where should it be, Patrick ? Did you enabled IMQ in make menuconfig ?
devik

Quoted 10 lines · Arindam Haldar

hi all,
i want to try htb3 with imq
downloaded & patched imq & htb3 with kernel-2.4.18 on rh7.2 but got STUCK on step 1 :(
this are what i did
can anyone guide me what went wrong on the first step itself !!

[root@cab1 root]# modprobe imq numdevs=1
modprobe: Can't locate module imq
[root@cab1 root]#

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

hi all,
i want to try htb3 with imq
downloaded & patched imq & htb3 with kernel-2.4.18 on rh7.2 but got STUCK on step 1 :(
this are what i did
can anyone guide me what went wrong on the first step itself !!

[root@cab1 root]# modprobe imq numdevs=1
modprobe: Can't locate module imq
[root@cab1 root]#
[root@cab1 root]# tc qdisc add dev imq0 handle 1: root htb default 1 Cannot find device "imq0"
[root@cab1 root]#
[root@cab1 root]# ls /lib/modules/2.4.18/kernel/net/sched/

cls_fw.o     cls_tcindex.o  sch_csz.o     sch_htb.o      sch_red.o 
sch_teql.o   cls_route.o  cls_u32.o      sch_dsmark.o  sch_ingress.o 
sch_sfq.o    cls_rsvp.o   sch_cbq.o      sch_gred.o    sch_prio.o 
sch_tbf.o
[root@cab1 root]#
[root@cab1 root]# ls /lib/modules/2.4.18/kernel/net/ipv4/netfilter/
ip_conntrack_egg.o      iptable_nat.o      ipt_MARK.o     ipt_REDIRECT.o
ip_conntrack_ftp.o      ip_tables.o      ipt_MASQUERADE.o  ipt_REJECT.o
ip_conntrack_h323.o     ipt_ah.o           ipt_MIRROR.o      ipt_state.o
ip_conntrack_irc.o      ipt_conntrack.o    ipt_mport.o      ipt_string.o
ip_conntrack.o          ipt_dscp.o         ipt_multiport.o  ipt_tcpmss.o
ip_conntrack_rpc_tcp.o  ipt_DSCP.o         ipt_NETLINK.o    ipt_TCPMSS.o
ip_conntrack_rpc_udp.o  ipt_esp.o          ipt_nth.o         ipt_time.o
ip_nat_ftp.o            ipt_helper.o       ipt_owner.o       ipt_tos.o
ip_nat_h323.o           ipt_IMQ.o          ipt_pkttype.o     ipt_TOS.o
ip_nat_irc.o            ipt_ipv4options.o  ipt_pool.o        ipt_ttl.o
ip_nat_snmp_basic.o     ipt_length.o       ipt_POOL.o        ipt_TTL.o
ip_pool.o               ipt_limit.o        ipt_psd.o         ipt_ULOG.o
ip_queue.o              ipt_LOG.o          ipt_realm.o     ipt_unclean.o
iptable_filter.o        ipt_mac.o          ipt_recent.o
iptable_mangle.o        ipt_mark.o         ipt_record_rpc.o

[root@cab1 root]#
[root@cab1 root]# tc -V
tc utility, iproute2-ss010824
[root@cab1 root]#
[root@cab1 root]# iptables -V
iptables v1.2.7-20020423
[root@cab1 root]#

thanking u in advance
A.H

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Martin Devera
Quoted 2 lines · Martin Devera

Seems there is no imq.o file. I'm not sure where should it be, Patrick ?

in should be in /lib/modules/$(uname -r)/drivers/net

Quoted 3 lines

Did you enabled IMQ in make menuconfig ?
devik

probably not .. :)

Quoted 11 lines · Arindam Haldar
Quoted 8 lines

hi all,
i want to try htb3 with imq
downloaded & patched imq & htb3 with kernel-2.4.18 on rh7.2 but got STUCK on step 1 :(
this are what i did
can anyone guide me what went wrong on the first step itself !!

Quoted 9 lines
Quoted 4 lines

[root@cab1 root]# modprobe imq numdevs=1
modprobe: Can't locate module imq
[root@cab1 root]#

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Bye
Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Martin Devera
Quoted 11 lines · Arindam Haldar
Quoted 6 lines · Patrick McHardy
Quoted 3 lines · Martin Devera

Seems there is no imq.o file. I'm not sure where should it be, Patrick ?

in should be in /lib/modules/$(uname -r)/drivers/net

NO..its not there ....!! :(

hmm it was wrong of course, it should be /lib/modules/$(uname -r)/kernel/drivers/net .. but it's not their either i guess ..
the option can be enabled in make menuconfig -> network device support. bye patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw
In reply to Martin Devera
Quoted 5 lines · Patrick McHardy
Quoted 2 lines · Martin Devera

Seems there is no imq.o file. I'm not sure where should it be, Patrick ?

in should be in /lib/modules/$(uname -r)/drivers/net

NO..its not there ....!! :(

Quoted 21 lines
Quoted 3 lines

Did you enabled IMQ in make menuconfig ?
devik

probably not .. :)

Quoted 16 lines · Arindam Haldar
Quoted 12 lines

hi all,
i want to try htb3 with imq
downloaded & patched imq & htb3 with kernel-2.4.18 on rh7.2 but got STUCK on step 1 :(
this are what i did
can anyone guide me what went wrong on the first step itself !!

[root@cab1 root]# modprobe imq numdevs=1
modprobe: Can't locate module imq
[root@cab1 root]#

Quoted 9 lines
Quoted 4 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Bye
Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/