IMQ FAQ
There were a rising number of problems/questions about imq. To answer some of them i've created a FAQ, a link is on the imq page. It still contains a error (compilation) but i'm going to fix it later.
Bye
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Do you need to use IP Tables to put traffic into IMQ or can you use 'tc filter add dev.....' ??
Regards
Justin
-----Original Message-----
From: Patrick McHardy [mailto:[email protected]]
Sent: 29 May 2002 12:30
To: [email protected]
Subject: [LARTC] IMQ FAQ
There were a rising number of problems/questions about imq. To answer some of them i've created a FAQ, a link is on the imq page. It still contains a error (compilation) but i'm going to fix it later.
Bye
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
The information contained in this email is privileged and confidential, intended only for the use of the individual or entity to whom it is addressed. If the reader of this email is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify the sender immediately by email and delete this email. Any views expressed in this email are those of the individual sender unless the sender specifically states This mail was virus scanned by SurfControl.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi.
Quoted 2 lines · Justin Owens
Do you need to use IP Tables to put traffic into IMQ or can you use 'tc filter add dev.....' ??
You have to distinguish between how to direct packets to imq and how to classify traffic inside qdiscs. Traffic gets directed to an imq device by the IMQ itables targets. Once packets have reached the device(qdisc) you can use any kind of classification you are used to...
Bye
Patrick
Quoted 18 lines
Quoted 1 line
Regards
Justin
-----Original Message-----
From: Patrick McHardy [mailto:[email protected]]
Sent: 29 May 2002 12:30
To: [email protected]
Subject: [LARTC] IMQ FAQThere were a rising number of problems/questions about imq. To answer some of them i've created a FAQ, a link is on the imq page. It still contains a error (compilation) but i'm going to fix it later.
Bye
Patrick
Quoted 8 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/The information contained in this email is privileged and confidential, intended only for the use of the individual or entity to whom it is addressed. If the reader of this email is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify the sender immediately by email and delete this email. Any views expressed in this email are those of the individual sender unless the sender specifically states This mail was virus scanned by SurfControl.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/