Skip to contentSkip to conversation

newbie to shapin'

LARTC mdew 2 participants 2 messages May 30, 2002

lore
Share & tools
lore

mdew

author
#0 lore raw

ok, we're about to move to a small (256k) wireless internet setup,...we have been warned not to do large amount of traffic...Basically we're investing into a small linux-b0x ..that would act as a router and shaper.

Basically I would like to limit uploads from a certain port (4000) and possibly limit downloads from that port aswell... Using Linux (2.4.x) setup.. Limit port 4000 to 2k upload/15k download (for example)

Router "192.168.0.1" -> Which sends traffic to all 3 pc's.
Computer A "10.0.0.1" Windows w2k
Computer B "10.0.0.2" Windows w2k
Computer C "10.0.0.3" Linux 2.4 (this b0x)

Ive read the docs, and found it pretty confusing...so many ways to do things... whats the best way to do this.? some examples please :)

Signature · 4 lines
ph33r!
Linux mdew 2.4.19-pre8-xfs-aa #3 Thu May 16 20:37:56 NZST 2002 i686
unknown
GPG Key: http://mdew.orcon.net.nz/gpg
#1 lore raw

first thing to remember is to limit on the outgoing network card and 2nd look into either HTB or CBQ under TC.
also check out
www.docum.org

----- Original Message -----
From: "mdew" <[email protected]>
To: "lartc" <[email protected]>
Sent: Wednesday, May 29, 2002 10:47 PM
Subject: [LARTC] newbie to shapin'

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/