Isolated Class in HTB
Hi All
I have a newbie question here.. I use HTB to manage bandwith in my University. We have 5 Faculties that connected directly to my office, So we made 6 classes with one class as Default class.
[root@gw-konsorsium root]# tc class show dev eth0
class htb 1:10 parent 1:2 leaf 10: prio 0 rate 256Kbit ceil 426Kbit burst 15Kb cburst 2Kb
class htb 1:2 root prio 0 rate 10Mbit ceil 10Mbit burst 15Kb cburst 14704b class htb 1:20 parent 1:2 leaf 20: prio 0 rate 86Kbit ceil 426Kbit burst 15Kb cburst 2254b
class htb 1:30 parent 1:2 leaf 30: prio 0 rate 86Kbit ceil 426Kbit burst 15Kb cburst 2254b
class htb 1:40 parent 1:2 leaf 40: prio 0 rate 86Kbit ceil 86Kbit burst 15Kb cburst 2254b
class htb 1:50 parent 1:2 leaf 50: prio 0 rate 64Kbit ceil 64Kbit burst 15Kb cburst 1680b
class htb 1:60 parent 1:2 leaf 60: prio 0 rate 1Kbit ceil 10Mbit burst 15Kb cburst 14704b
[root@gw-konsorsium root]# tc qdisc show dev eth0
qdisc sfq 60: quantum 1514b perturb 10sec
qdisc sfq 50: quantum 1514b perturb 10sec
qdisc sfq 40: quantum 1514b perturb 10sec
qdisc sfq 30: quantum 1514b perturb 10sec
qdisc sfq 20: quantum 1514b perturb 10sec
qdisc sfq 10: quantum 1514b perturb 10sec
qdisc htb 1: r2q 100 default 60 dcache 0
deq_util 1/244 deq_rate 161 trials_per_deq 1
dcache_hits 0 direct_packets 4
My problem is One faculty (Class 1:40) don`t want to borrow and lend bandwith to other classes.
I use SFQ as queing discipline. In CBQ with TBF we can do ISOLATED and BOUNDED.. How to do it in HTB .?
Thnx
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
class htb 1:40 parent 1:2 leaf 40: prio 0 rate 86Kbit ceil 86Kbit burst 15Kb cburst 2254b
It can't borrow from other because rate 86kbit and ceil 86kbit but it can share its bandwith with other classes
Quoted 38 lines · 04.06.2002 9:06:25, <[email protected]> wrote:
Hi All
I have a newbie question here.. I use HTB to manage bandwith in my University. We have 5 Faculties that connected directly to my office, So we made 6 classes with one class as Default class.
[root@gw-konsorsium root]# tc class show dev eth0
class htb 1:10 parent 1:2 leaf 10: prio 0 rate 256Kbit ceil 426Kbit burst 15Kb cburst 2Kb
class htb 1:2 root prio 0 rate 10Mbit ceil 10Mbit burst 15Kb cburst 14704b class htb 1:20 parent 1:2 leaf 20: prio 0 rate 86Kbit ceil 426Kbit burst 15Kb cburst 2254b
class htb 1:30 parent 1:2 leaf 30: prio 0 rate 86Kbit ceil 426Kbit burst 15Kb cburst 2254b
class htb 1:40 parent 1:2 leaf 40: prio 0 rate 86Kbit ceil 86Kbit burst 15Kb cburst 2254b
class htb 1:50 parent 1:2 leaf 50: prio 0 rate 64Kbit ceil 64Kbit burst 15Kb cburst 1680b
class htb 1:60 parent 1:2 leaf 60: prio 0 rate 1Kbit ceil 10Mbit burst 15Kb cburst 14704b[root@gw-konsorsium root]# tc qdisc show dev eth0
qdisc sfq 60: quantum 1514b perturb 10sec
qdisc sfq 50: quantum 1514b perturb 10sec
qdisc sfq 40: quantum 1514b perturb 10sec
qdisc sfq 30: quantum 1514b perturb 10sec
qdisc sfq 20: quantum 1514b perturb 10sec
qdisc sfq 10: quantum 1514b perturb 10sec
qdisc htb 1: r2q 100 default 60 dcache 0deq_util1/244deq_rate161trials_per_deq1dcache_hits0direct_packets4My problem is One faculty (Class 1:40) don`t want to borrow and lend bandwith to other classes.
I use SFQ as queing discipline. In CBQ with TBF we can do ISOLATED and BOUNDED.. How to do it in HTB .?
Quoted 7 lines
Thnx
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Use independent root. I.e. create 1:40 with 1:0 as root not 1:2. Roots of hierarchy are isolated each against other.
And like someone other wrote, use ceil to bound both 1:2 and 1:40 to appropriate values.
devik
Quoted 5 lines
My problem is One faculty (Class 1:40) don`t want to borrow and lend bandwith to other classes.
I use SFQ as queing discipline. In CBQ with TBF we can do ISOLATED and BOUNDED.. How to do it in HTB .?
Quoted 8 lines
Thnx
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I see.. But Can I attach more than one root class in one Device (Ethernet)..? I am sorry but I don`t find any case or example like this before..
Thnx In Advanced
Quoted 17 lines
Use independent root. I.e. create 1:40 with 1:0 as root not 1:2. Roots of hierarchy are isolated each against other.
And like someone other wrote, use ceil to bound both 1:2 and 1:40 to appropriate values.
devikQuoted 11 lines
My problem is One faculty (Class 1:40) don`t want to borrow and lend bandwith to other classes.
I use SFQ as queing discipline. In CBQ with TBF we can do ISOLATED and BOUNDED.. How to do it in HTB .?Thnx
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines · On Tuesday 04 June 2002 18:50, [email protected] wrote:
I see.. But Can I attach more than one root class in one Device (Ethernet)..? I am sorry but I don`t find any case or example like this before..
You can only attach one qdisc to a device. If you want to have a class that will not borrow, nor lend from/to other classes, you can do this (copied from your setup) :
root qdisc
class 1:1 rate = ceil = 426 Kbit
class 1:40 rate = ceil = 86 Kbit
class 1:2 rate = ceil = 340 Kbit (426 - 86)
class 1:20 rate = 86, ceil = 340 Kbit
class 1:30 rate = 86, ceil = 340 Kbit
class 1:50 rate = 64, ceil = 64 Kbit
class 1:60 rate = 1, ceil = 10Mbit (Why ???)class 1:40 will never lend nor borrow bandwidth from the other classes.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/