Bandwidth allocation by IP
I have a LAN (eth1) and 1Mbit internet which is very unstable (from 100kbit - 2mbit) on eth0. I would like to prevent ip A downloading with 9 threads taking 90% bandwidth and ip B downloading with 1 thread taking 10%. I would like ip A as well as ip B to have each 50% of bandwith no care how many threads they are downloading. I suppose that it could be done on eth1. But how?
Second problem: I want to lessen round-trips. Should I do it with priorizing small packets on eth0? How?
I have 2.4.18, iproute2 with extra htb. PSCHED_JIFFIES (unfortunately - it's only AMD 160MHz and does not have TSC)
Thanks
--
Vladimir Trebicky
[email protected]
---
Odchozi zprava neobsahuje viry.
Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virová báze: 204 - datum vydání: 29.5.2002
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Try WRR on eth1 see http://wipl-wrr.sourceforge.net/ for details or use ESFQ
see mail from Alexander Atanasov 05.06.2002
I rename files gzip its and attach to this mail but don't change anything patch kernel and tc
cd iproute2
patch -p1 < ../esfq-tc.diff
cd linux-2.4.18
patch -p1 < ../esfq-2.4.18.diff
recompile kernel and tc thats all !!
see README
Note it give you equal division for a long term not at the moment Example:
tc qdisc add dev eth1 root handle 1:0 esfq hash src
It make equal priority for session based on ip address not tcp session like classic SFQ For detail see SFQ
Quoted 18 lines · Vladimir Trebicky
I have a LAN (eth1) and 1Mbit internet which is very unstable (from 100kbit - 2mbit) on eth0. I would like to prevent ip A downloading with 9 threads taking 90% bandwidth and ip B downloading with 1 thread taking 10%. I would like ip A as well as ip B to have each 50% of bandwith no care how many threads they are downloading. I suppose that it could be done on eth1. But how?
Second problem: I want to lessen round-trips. Should I do it with priorizing small packets on eth0? How?
I have 2.4.18, iproute2 with extra htb.PSCHED_JIFFIES(unfortunately - it's only AMD 160MHz and does not have TSC)Thanks
--
Vladimir Trebicky
[email protected]
Quoted 9 lines
---
Odchozi zprava neobsahuje viry.
Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virová báze: 204 - datum vydání: 29.5.2002_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
Hi there!
Quoted 2 lines · On Wed, 05 Jun 2002 16:19:41 +0500 "Alexey Talikov"…
I rename files gzip its and attach to this mail but don't change anything patch kernel and tc
I'll put them somewhere on the web tonight and provide an url.
Quoted 7 lines
Note it give you equal division for a long term not at the moment Example:
tc qdisc add dev eth1 root handle 1:0 esfq hash src
It make equal priority for session based on ip address not tcp session like classic SFQ For detail see SFQ
Note that sfq is on egress and client IPs are destinations, not sources,
so you should use dst hash to divide bandwidth between clients, if you use src hash you have equal priority on server flows not on clients ones: client A downloads from server X and from server Y, client B downloads from server Z - you have bandwidth devided to X:Y:Z, not A:B, since downloads are coming from X/Y/Z(source) to A/B(destination).
--
have fun,
alexP.S. Thank you for the feedback and trying it. :)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Thanks for your note about my error !!
You right needed dst ip but I write src :((
Quoted 13 lines · Alexander Atanasov
Hi there!
Quoted 2 lines · On Wed, 05 Jun 2002 16:19:41 +0500 "Alexey Talikov"…
I rename files gzip its and attach to this mail but don't change anything patch kernel and tc
I'll put them somewhere on the web tonight and provide an url.
Quoted 3 lines
Note it give you equal division for a long term not at the moment Example:
Quoted 7 lines
Quoted 4 lines
tc qdisc add dev eth1 root handle 1:0 esfq hash src
It make equal priority for session based on ip address not tcp session like classic SFQ For detail see SFQ
Note that sfq is on egress and client IPs are destinations, not sources,
so you should use dst hash to divide bandwidth between clients, if you use src hash you have equal
priority on server flows not on clients ones: client A downloads from server X and from server Y, client B downloads from server Z - you have bandwidth devided to X:Y:Z, not A:B, since downloads are coming from X/Y/Z(source) to A/B(destination).
Quoted 6 lines
--
have fun,
alexP.S. Thank you for the feedback and trying it. :)
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
That sound like something what I exactly need.
1) what is the difference (adv & disadv) between esfq and wrr?
2) little problem in attachment, I don't know what to do. I tried latest
(that 2002-try) and latest stable version (ss010824).
Quoted 14 lines
Try WRR on eth1 see http://wipl-wrr.sourceforge.net/ for details or use ESFQ
see mail from Alexander Atanasov 05.06.2002
I rename files gzip its and attach to this mail but don't change anything patch kernel and tc
cd iproute2
patch -p1 <../esfq-tc.diff
cd linux-2.4.18
patch -p1 <../esfq-2.4.18.diff
recompile kernel and tc thats all !!
see README
Note it give you equal division for a long term not at the moment Example:
Quoted 3 lines
tc qdisc add dev eth1 root handle 1:0 esfq hash src
It make equal priority for session based on ip address not tcp session
like classic SFQ
Quoted 6 lines
For detail see SFQ
Quoted 3 lines · Vladimir Trebicky
I have a LAN (eth1) and 1Mbit internet which is very unstable (from 100kbit - 2mbit) on eth0. I would like to prevent ip A downloading with 9 threads taking 90% bandwidth and ip B downloading with 1 thread taking
10%.
Quoted 1 line
Quoted 1 line
I would like ip A as well as ip B to have each 50% of bandwith no care
how
Quoted 1 line
Quoted 1 line
many threads they are downloading. I suppose that it could be done on
eth1.
Quoted 2 lines
Quoted 2 lines
But how?
Second problem: I want to lessen round-trips. Should I do it with
priorizing
Quoted 2 lines
Quoted 2 lines
small packets on eth0? How?
I have 2.4.18, iproute2 with extra htb.PSCHED_JIFFIES(unfortunately -
it's
Quoted 19 lines
Quoted 9 lines
only AMD 160MHz and does not have TSC)
Thanks
--
Vladimir Trebicky
[email protected]Quoted 9 lines
---
Odchozi zprava neobsahuje viry.
Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virová báze: 204 - datum vydání: 29.5.2002_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
---
Odchozi zprava neobsahuje viry.
Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virová báze: 204 - datum vydání: 29.5.2002
gcc -D_GNU_SOURCE -O2 -Wstrict-prototypes -Wall -Werror -g -I../include-glibc -include ../include-glibc/glibc-bugs.h -I/usr/src/linux-2.4/include -I../include -DRESOLVE_HOSTNAMES -c -o q_esfq.o q_esfq.cq_esfq.c: In function `esfq_parse_opt':
q_esfq.c:45: structure has no member named hash_kind' q_esfq.c:45: TCA_SFQ_HASH_CLASSIC' undeclared (first use in this function) q_esfq.c:45: (Each undeclared identifier is reported only once q_esfq.c:45: for each function it appears in.)
q_esfq.c:91: structure has no member named hash_kind' q_esfq.c:94: structure has no member named hash_kind' q_esfq.c:94: TCA_SFQ_HASH_DST' undeclared (first use in this function) q_esfq.c:97: structure has no member named hash_kind' q_esfq.c:97: TCA_SFQ_HASH_SRC' undeclared (first use in this function) q_esfq.c: In function esfq_print_opt':
q_esfq.c:140: structure has no member named hash_kind' q_esfq.c:142: TCA_SFQ_HASH_CLASSIC' undeclared (first use in this function) q_esfq.c:145: TCA_SFQ_HASH_DST' undeclared (first use in this function) q_esfq.c:148: TCA_SFQ_HASH_SRC' undeclared (first use in this function)
cc1: warnings being treated as errors
q_esfq.c:143: warning: unreachable code at beginning of switch statement make[1]: *** [q_esfq.o] Error 1
make[1]: Leaving directory `/usr/src/iproute2/tc'
make: *** [all] Error 2
use latest version iproute2-2.4.7-now-ss020116-try it work without problem (for me)
esfq is more simple in configuration that wrr but in wrr more features for traffic control and its use another principle
read more about WRR and also see doc in package wrr and see http://docum.org/.
Quoted 69 lines · Vladimir Trebicky
That sound like something what I exactly need.
1) what is the difference (adv & disadv) between esfq and wrr?
2) little problem in attachment, I don't know what to do. I tried latest
(that 2002-try) and latest stable version (ss010824).Quoted 14 lines
Try WRR on eth1 see http://wipl-wrr.sourceforge.net/ for details or use ESFQ
see mail from Alexander Atanasov 05.06.2002
I rename files gzip its and attach to this mail but don't change anything patch kernel and tc
cd iproute2
patch -p1 <../esfq-tc.diff
cd linux-2.4.18
patch -p1 <../esfq-2.4.18.diff
recompile kernel and tc thats all !!
see README
Note it give you equal division for a long term not at the moment Example:Quoted 3 lines
tc qdisc add dev eth1 root handle 1:0 esfq hash src
It make equal priority for session based on ip address not tcp session
like classic SFQ
Quoted 6 lines
For detail see SFQ
Quoted 3 lines · Vladimir Trebicky
I have a LAN (eth1) and 1Mbit internet which is very unstable (from 100kbit - 2mbit) on eth0. I would like to prevent ip A downloading with 9 threads taking 90% bandwidth and ip B downloading with 1 thread taking
10%.
Quoted 1 line
Quoted 1 line
I would like ip A as well as ip B to have each 50% of bandwith no care
how
Quoted 1 line
Quoted 1 line
many threads they are downloading. I suppose that it could be done on
eth1.
Quoted 2 lines
Quoted 2 lines
But how?
Second problem: I want to lessen round-trips. Should I do it withpriorizing
Quoted 2 lines
Quoted 2 lines
small packets on eth0? How?
I have 2.4.18, iproute2 with extra htb.PSCHED_JIFFIES(unfortunately -it's
Quoted 19 lines
Quoted 9 lines
only AMD 160MHz and does not have TSC)
Thanks
--
Vladimir Trebicky
[email protected]Quoted 9 lines
---
Odchozi zprava neobsahuje viry.
Zkontrolov?no antivirov?m syst?mem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virov? b?ze: 204 - datum vyd?n?: 29.5.2002_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/Quoted 7 lines
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
Quoted 6 lines
---
Odchozi zprava neobsahuje viry.
Zkontrolov?no antivirov?m syst?mem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virov? b?ze: 204 - datum vyd?n?: 29.5.2002
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · On Wed, 5 Jun 2002 15:09:07 +0200 "Vladimir Trebicky" <[email protected]> wrote:
That sound like something what I exactly need.
1) what is the difference (adv & disadv) between esfq and wrr?
2) little problem in attachment, I don't know what to do. I tried latest
(that 2002-try) and latest stable version (ss010824).
You're tring to build tc without kernel patch applied or with a different
kernel source tree . Check is kernel patched and then check:
iproute2/Makefile:
KERNEL_INCLUDE=/usr/src/linux/include
If your patched kernel is elsewhere change this to point there and then "make clean; make".
--
have fun,
alex
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
ESFQ !? Did I missed something ? :-)
devik
Quoted 94 lines · Alexey Talikov
use latest version iproute2-2.4.7-now-ss020116-try it work without problem (for me)
esfq is more simple in configuration that wrr but in wrr more features for traffic control and its use another principle
read more about WRR and also see doc in package wrr and see http://docum.org/.Quoted 69 lines · Vladimir Trebicky
That sound like something what I exactly need.
1) what is the difference (adv & disadv) between esfq and wrr?
2) little problem in attachment, I don't know what to do. I tried latest
(that 2002-try) and latest stable version (ss010824).Quoted 14 lines
Try WRR on eth1 see http://wipl-wrr.sourceforge.net/ for details or use ESFQ
see mail from Alexander Atanasov 05.06.2002
I rename files gzip its and attach to this mail but don't change anything patch kernel and tc
cd iproute2
patch -p1 <../esfq-tc.diff
cd linux-2.4.18
patch -p1 <../esfq-2.4.18.diff
recompile kernel and tc thats all !!
see README
Note it give you equal division for a long term not at the moment Example:Quoted 3 lines
tc qdisc add dev eth1 root handle 1:0 esfq hash src
It make equal priority for session based on ip address not tcp session
like classic SFQ
Quoted 6 lines
For detail see SFQ
Quoted 3 lines · Vladimir Trebicky
I have a LAN (eth1) and 1Mbit internet which is very unstable (from 100kbit - 2mbit) on eth0. I would like to prevent ip A downloading with 9 threads taking 90% bandwidth and ip B downloading with 1 thread taking
10%.
Quoted 1 line
Quoted 1 line
I would like ip A as well as ip B to have each 50% of bandwith no care
how
Quoted 1 line
Quoted 1 line
many threads they are downloading. I suppose that it could be done on
eth1.
Quoted 2 lines
Quoted 2 lines
But how?
Second problem: I want to lessen round-trips. Should I do it withpriorizing
Quoted 2 lines
Quoted 2 lines
small packets on eth0? How?
I have 2.4.18, iproute2 with extra htb.PSCHED_JIFFIES(unfortunately -it's
Quoted 19 lines
Quoted 9 lines
only AMD 160MHz and does not have TSC)
Thanks
--
Vladimir Trebicky
[email protected]Quoted 9 lines
---
Odchozi zprava neobsahuje viry.
Zkontrolov?no antivirov?m syst?mem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virov? b?ze: 204 - datum vyd?n?: 29.5.2002_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/Quoted 7 lines
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------Quoted 6 lines
---
Odchozi zprava neobsahuje viry.
Zkontrolov?no antivirov?m syst?mem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virov? b?ze: 204 - datum vyd?n?: 29.5.2002-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
Quoted 5 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I've compiled tc (after hint to patch the kernel first :-) and also kernel. Both with extra wrr, esfq and htb. I forgot to ask whether is esfq supposed to be compiled as a module or to be built-in. So I've tried it as built-in and after command tc qdisc add dev eth1 root handle 1: esfq hash src:
RNETLING answers: Invalid argument
That seems to me like it wouldn't be in kernel, but it is :-( Please see my configuration for kernel in attachment.
Somewhere there is also something that does that my machine has address
like: mymachine.IN-ADDR-ARPA... I don't know what it is and I also don't want to uncheck something I could possibly need for Full-NAT and QoS...
----- Original Message -----
From: "Alexey Talikov" <[email protected]>
To: <[email protected]>; "Vladimir Trebicky" <[email protected]>
Sent: Wednesday, June 05, 2002 1:19 PM
Subject: Re: [LARTC] Bandwidth allocation by IP
Quoted 14 lines
Try WRR on eth1 see http://wipl-wrr.sourceforge.net/ for details or use ESFQ
see mail from Alexander Atanasov 05.06.2002
I rename files gzip its and attach to this mail but don't change anything patch kernel and tc
cd iproute2
patch -p1 <../esfq-tc.diff
cd linux-2.4.18
patch -p1 <../esfq-2.4.18.diff
recompile kernel and tc thats all !!
see README
Note it give you equal division for a long term not at the moment Example:
Quoted 3 lines
tc qdisc add dev eth1 root handle 1:0 esfq hash src
It make equal priority for session based on ip address not tcp session
like classic SFQ
Quoted 6 lines
For detail see SFQ
Quoted 3 lines · Vladimir Trebicky
I have a LAN (eth1) and 1Mbit internet which is very unstable (from 100kbit - 2mbit) on eth0. I would like to prevent ip A downloading with 9 threads taking 90% bandwidth and ip B downloading with 1 thread taking
10%.
Quoted 1 line
Quoted 1 line
I would like ip A as well as ip B to have each 50% of bandwith no care
how
Quoted 1 line
Quoted 1 line
many threads they are downloading. I suppose that it could be done on
eth1.
Quoted 2 lines
Quoted 2 lines
But how?
Second problem: I want to lessen round-trips. Should I do it with
priorizing
Quoted 2 lines
Quoted 2 lines
small packets on eth0? How?
I have 2.4.18, iproute2 with extra htb.PSCHED_JIFFIES(unfortunately -
it's
Quoted 19 lines
Quoted 9 lines
only AMD 160MHz and does not have TSC)
Thanks
--
Vladimir Trebicky
[email protected]Quoted 9 lines
---
Odchozi zprava neobsahuje viry.
Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virová báze: 204 - datum vydání: 29.5.2002_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
---
Odchozi zprava neobsahuje viry.
Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virová báze: 204 - datum vydání: 29.5.2002
Sorry for my incompetence. I didn't noticed that readme included in some of Alexes posts. Module works fine only if I do
qdisc add dev eth1 root handle 1: esfq
when I do
qdisc add dev eth1 root handle 1: esfq hash dst
the computer get totally freezed.
----- Original Message -----
From: "Alexey Talikov" <[email protected]>
To: <[email protected]>; "Vladimir Trebicky" <[email protected]>
Sent: Wednesday, June 05, 2002 1:19 PM
Subject: Re: [LARTC] Bandwidth allocation by IP
Quoted 14 lines
Try WRR on eth1 see http://wipl-wrr.sourceforge.net/ for details or use ESFQ
see mail from Alexander Atanasov 05.06.2002
I rename files gzip its and attach to this mail but don't change anything patch kernel and tc
cd iproute2
patch -p1 <../esfq-tc.diff
cd linux-2.4.18
patch -p1 <../esfq-2.4.18.diff
recompile kernel and tc thats all !!
see README
Note it give you equal division for a long term not at the moment Example:
Quoted 3 lines
tc qdisc add dev eth1 root handle 1:0 esfq hash src
It make equal priority for session based on ip address not tcp session
like classic SFQ
Quoted 6 lines
For detail see SFQ
Quoted 3 lines · Vladimir Trebicky
I have a LAN (eth1) and 1Mbit internet which is very unstable (from 100kbit - 2mbit) on eth0. I would like to prevent ip A downloading with 9 threads taking 90% bandwidth and ip B downloading with 1 thread taking
10%.
Quoted 1 line
Quoted 1 line
I would like ip A as well as ip B to have each 50% of bandwith no care
how
Quoted 1 line
Quoted 1 line
many threads they are downloading. I suppose that it could be done on
eth1.
Quoted 2 lines
Quoted 2 lines
But how?
Second problem: I want to lessen round-trips. Should I do it with
priorizing
Quoted 2 lines
Quoted 2 lines
small packets on eth0? How?
I have 2.4.18, iproute2 with extra htb.PSCHED_JIFFIES(unfortunately -
it's
Quoted 19 lines
Quoted 9 lines
only AMD 160MHz and does not have TSC)
Thanks
--
Vladimir Trebicky
[email protected]Quoted 9 lines
---
Odchozi zprava neobsahuje viry.
Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virová báze: 204 - datum vydání: 29.5.2002_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
---
Odchozi zprava neobsahuje viry.
Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virová báze: 204 - datum vydání: 29.5.2002
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi there!
Quoted 7 lines · Vladimir Trebicky
Sorry for my incompetence. I didn't noticed that readme included in some of Alexes posts. Module works fine only if I do
qdisc add dev eth1 root handle 1: esfq
when I do
qdisc add dev eth1 root handle 1: esfq hash dst
the computer get totally freezed.
Are you sure you've build the kernel correct?
I've fixed some things about default parameters - i think you've
hit this, hash_divisor was left to be 0 when not supplied as parameter.
Now works and as built in - forgot to include sch_api.c when
making diff first time, so it was in kernel but not registerd.
I've setup a page for it on: http://www.ssi.bg/~alex/esfq/index.html
Signature · 6 lines
have fun, alex _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Well, I took 0.2 version, I compiled it as a module - no problem. tc qdisc add dev eth1 root handle 1: esfq hash dst
- ok
but then I started in one moment to upload (via eth1 of course) 3 scp's. The first 2 were uploading on ip A and the third was uploading on ip B. But all those three threads were uploading with eqaul rate. Either I missed something (it's not so rare) or something went wrong...
what do you thing?
root:/usr/src# tc -s qdisc show dev eth1 qdisc esfq 1: quantum 1514b hash: dst Sent 5615415 bytes 4513 pkts (dropped 0, overlimits 0)
----- Original Message -----
From: "Alexander Atanasov" <[email protected]>
To: "Vladimir Trebicky" <[email protected]>
Cc: <[email protected]>; <[email protected]>
Sent: Thursday, June 06, 2002 4:47 AM
Subject: Re: [LARTC] Bandwidth allocation by IP
Quoted 5 lines
Hi there!
Quoted 1 line · Vladimir Trebicky
Sorry for my incompetence. I didn't noticed that readme included in some
of
Quoted 15 lines
Quoted 6 lines
Alexes posts. Module works fine only if I do
qdisc add dev eth1 root handle 1: esfq
when I do
qdisc add dev eth1 root handle 1: esfq hash dst
the computer get totally freezed.Are you sure you've build the kernel correct?
I've fixed some things about default parameters - i think you've hit this,
hash_divisorwas left to be 0 when not supplied as parameter. Now works and as built in - forgot to includesch_api.cwhen making diff first time, so it was in kernel but not registerd. I've setup a page for it on: http://www.ssi.bg/~alex/esfq/index.html
Quoted 7 lines
--
have fun,
alex_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
---
Odchozi zprava neobsahuje viry.
Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
Verze: 6.0.368 / Virová báze: 204 - datum vydání: 29.5.2002
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · Vladimir Trebicky
Well, I took 0.2 version, I compiled it as a module - no problem. tc qdisc add dev eth1 root handle 1: esfq hash dst
- ok
but then I started in one moment to upload (via eth1 of course) 3 scp's. The first 2 were uploading on ip A and the third was uploading on ip B. But all those three threads were uploading with eqaul rate. Either I missed something (it's not so rare) or something went wrong...what do you thing?
You attached esfq as your root qdisc it have 10/100MBits
bandwidth. 3 SCPs can hardly fill up a 10/100MBits link - each one should send data 3.33/33.3MBits , i guess they send less.
Signature · 6 lines
have fun, alex _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/