Skip to contentSkip to conversation

installing HTB

LARTC Chris K Ellsworth 3 participants 3 messages Jun 5, 2002

lore
Share & tools
lore
#1 lore raw
Quoted 4 lines · Chris K Ellsworth

when i go to install htb i know i need to patch the kernel (DONE) and do i need grab the iprotue2+tc and patch then make or just use the tc binary from the tgz file and replace the tc file curently located on the system?

You also need to patch iproute and compile a new tc binary.

Stef

Signature · 7 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Chris K Ellsworth

OR you can use binary in tar - the iproute compilation is not needed then.
devik

Quoted 11 lines · Stef Coene
Quoted 4 lines · Chris K Ellsworth

when i go to install htb i know i need to patch the kernel (DONE) and do i need grab the iprotue2+tc and patch then make or just use the tc binary from the tgz file and replace the tc file curently located on the system?

You also need to patch iproute and compile a new tc binary.

Stef

--

Quoted 9 lines

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/