kernel error messages
Hello,
I have made every effort learning QoS. I chose HTB and wrote a script (attached to the message). The problem is error messages in syslog. They appear on heavy load. It looks like:
Jun 12 23:00:04 server kernel: KERNEL: assertion (delay > 0 && delay < 5000000) failed at sch_htb.c(411) Jun 12 23:00:41 server last message repeated 12 times Jun 12 23:01:42 server last message repeated 72 times Jun 12 23:02:43 server last message repeated 49 times Jun 12 23:03:51 server last message repeated 29 times Jun 12 23:04:52 server last message repeated 46 times Jun 12 23:05:02 server last message repeated 16 times
What does it mean?
There was another type of messages:
Jun 12 19:42:33 server kernel: htb*r0 m=0 Jun 12 19:42:34 server kernel: HTB: quantum of class 10040 is small. Consider r2q change.<7>htb*g j=7636248 Jun 12 19:42:34 server kernel: htb*r7 m=0 Jun 12 19:42:34 server kernel: htb*r6 m=0 Jun 12 19:42:34 server kernel: htb*r5 m=0 Jun 12 19:42:34 server kernel: htb*r4 m=0 Jun 12 19:42:34 server kernel: htb*r3 m=0 Jun 12 19:42:34 server kernel: htb*r2 m=0 Jun 12 19:42:34 server kernel: htb*r1 m=0
but after I added "r2q 1" parameter to a htb qdisc, kernel started complaining with the message above.
Please help me or give some kind of hint.
Bye,
Tadas
#!/bin/bash
#Left to do
# * WWW -> 1:20
# * ICQ,IRC
# * takas proxy
# * fwrules (proxy.takas.lt->here)
# * FTP <->
# Definitions
PPP=ppp0
IMQ=imq0
BURST=6k
UPLINK=63
DOWNLINK=255
CLASS1_REMOTE_PORTS="27015 27016 27020"
CLASS2_REMOTE_PORTS="6667 5190 22"
CLASS4_REMOTE_PORTS="1214 20 seq -f \"4100%g\" 0 9 seq -f \"410%g\" 10 20" CLASS4_LOCAL_PORTS="25 20 80 seq -f \"4100%g\" 0 9 seq -f \"410%g\" 10 20"
############## Function definitions ################## #echo -e "\033[1;35m xxx \033[0m"
function add_qdisc {
echo -e "\033[0;35m>>>\033[0;31m $1\033[0m"
$1
}function add_class {
# echo -e " \033[0;35m>>>\033[0;36m "
# COUNTER=0
# while [ $COUNTER -lt $2 ]; do
# let COUNTER=COUNTER+1
# echo -n " "
# done
# echo -e "$1\033[0m"
echo -e " \033[0;35m>>>\033[0;36m $1\033[0m" $1 }
function msg {
echo -e " \033[1;35m* \033[0;34m $1\033[0m"
}function add_filter {
if [ "$1" = "debug" ]
then
echo -e " \033[0;35m>>>\033[0;32m $1\033[0m"
fi
$1
}function show_dev {
echo -e " \033[0;31m$1\033[0m"
}function show_class {
echo -e " \033[0;32m$1\033[0m"
}function show_qdisc {
echo -e " \033[0;36m$1\033[0m"
}############## Show status ###########################
if [ "$1" = "status" ]
then
show_dev "******* $PPP *******" echo -e " \033[0;36m" tc -s qdisc ls dev $PPP echo -e " \033[0;32m" tc -s class ls dev $PPP show_dev "******* $IMQ *******" echo -e " \033[0;36m" tc -s qdisc ls dev $IMQ echo -e " \033[0;32m" tc -s class ls dev $IMQ echo -e "\033[0m" exit
fi
################# Firewall & system settings ########### modprobe imq numdevs=1
ip link set imq0 up
# Clean mangle table
iptables -t mangle -F PREROUTING
iptables -t mangle -F POSTROUTING
iptables -t mangle -F INPUT
iptables -t mangle -F OUTPUT
iptables -t mangle -F FORWARD
# Some packet marking
iptables -t mangle -A INPUT -i $PPP -s proxy.takas.lt -p tcp -m tcp --sport 8080 -j MARK --set-mark=7 iptables -t mangle -A OUTPUT -o $PPP -d proxy.takas.lt -p tcp -m tcp --dport 8080 -j MARK --set-mark=3
iptables -t mangle -A PREROUTING -i $PPP -p udp -m udp --sport 53 -j MARK --set-mark 6 iptables -t mangle -A PREROUTING -p udp -m udp --dport 53 -j MARK --set-mark 2
iptables -t mangle -A INPUT -i $PPP -p udp -m udp --sport 53 -j MARK --set-mark 6 iptables -t mangle -A OUTPUT -p udp -m udp --dport 53 -j MARK --set-mark 2
#iptables -t mangle -A PREROUTING -i $PPP -p tcp -m tos --tos minimize-delay -m state --state ESTABLISHED -j MARK --set-mark 2
# Queue incoming packets
#iptables -t mangle -A PREROUTING -i $PPP -j LOG
iptables -t mangle -A PREROUTING -i $PPP -j IMQ
#######################################################
# clean existing down- and uplink qdiscs, hide errors tc qdisc del dev $PPP root 2> /dev/null > /dev/null tc qdisc del dev $PPP ingress 2> /dev/null > /dev/null
tc qdisc del dev $IMQ root 2> /dev/null > /dev/null
tc qdisc del dev $IMQ ingress 2> /dev/null > /dev/null
if [ "$1" = "stop" ]
then
exit
fi
show_dev "########## Uplink ###########"add_qdisc "tc qdisc add dev $PPP root handle 1: htb default 30 r2q 1"
add_class "tc class add dev $PPP parent 1: classid 1:1 htb rate 63kbit burst $BURST"
add_class "tc class add dev $PPP parent 1:1 classid 1:10 htb rate $[$UPLINK*45/100]kbit ceil ${UPLINK}kbit burst $BURST prio 1" add_class "tc class add dev $PPP parent 1:1 classid 1:20 htb rate $[$UPLINK*35/100]kbit ceil ${UPLINK}kbit burst $BURST prio 2" add_class "tc class add dev $PPP parent 1:1 classid 1:30 htb rate $[$UPLINK*19/100]kbit ceil ${UPLINK}kbit burst $BURST prio 2" add_class "tc class add dev $PPP parent 1:1 classid 1:40 htb rate 1kbit ceil $[8*$UPLINK/10]kbit burst $BURST prio 2"
add_qdisc "tc qdisc add dev $PPP parent 1:10 handle 10: sfq perturb 10" add_qdisc "tc qdisc add dev $PPP parent 1:20 handle 20: sfq perturb 10" add_qdisc "tc qdisc add dev $PPP parent 1:30 handle 30: sfq perturb 10" add_qdisc "tc qdisc add dev $PPP parent 1:40 handle 40: sfq perturb 10"
# Matches
U32="tc filter add dev $PPP protocol ip parent 1:0 prio 1 u32"
msg "- UP - 1 -------"
#echo "Adding EXTREMALY high priority UPLOAD trafic filters" for a in $CLASS1_REMOTE_PORTS
do
add_filter "$U32 match ip dport $a 0xffff flowid 1:10"
done
msg " ICMP (ip protocol 1) in the interactive class 1:10 so we \
can do measurements & impress our friends:"add_filter "$U32 match ip protocol 1 0xff flowid 1:10"
msg "- UP - 2 -------"
#Important packets
# TOS Minimum Delay (ssh, NOT scp) in 1:10:add_filter "$U32 match ip tos 0x10 0xff flowid 1:20"
msg "Adding fiilters for dport ranges"
for a in $CLASS2_REMOTE_PORTS
do
add_filter "$U32 match ip dport $a 0xffff flowid 1:20"
done
msg "- UP - 4 -------"
# echo "Adding lowest priority uplink filters" for a in $CLASS4_REMOTE_PORTS do add_filter "$U32 match ip dport $a 0xffff flowid 1:40" done
for a in $CLASS4_LOCAL_PORTS
do
add_filter "$U32 match ip sport $a 0xffff flowid 1:40"
done
msg "prioritize small packets (<64 bytes)"add_filter "$U32 match ip protocol 6 0xff \
match u8 0x05 0x0f at 0 \
match u16 0x0000 0xffc0 at 2 \
flowid 1:20"
msg "filter by fw mark"
#add_filter "tc filter add dev $PPP protocol ip pref 2 parent 1:0 handle 2 fw classid 1:10" add_filter "tc filter add dev $PPP protocol ip pref 3 parent 1:0 handle 3 fw classid 1:20" add_filter "tc filter add dev $PPP protocol ip pref 4 parent 1:0 handle 4 fw classid 1:30" add_filter "tc filter add dev $PPP protocol ip pref 5 parent 1:0 handle 5 fw classid 1:40"
add_filter "$U32 match ip dst 0.0.0.0/0 flowid 1:30"
show_dev "############ Downlink ####################"
# Classesadd_qdisc "tc qdisc add dev $IMQ root handle 1: htb default 30"
add_class "tc class add dev $IMQ parent 1: classid 1:1 htb rate ${DOWNLINK}kbit ceil ${DOWNLINK}kbit"
add_class "tc class add dev $IMQ parent 1:1 classid 1:10 htb rate $[$DOWNLINK*45/100]kbit ceil ${DOWNLINK}kbit burst $BURST prio 1"
add_class "tc class add dev $IMQ parent 1:1 classid 1:20 htb rate $[$DOWNLINK*35/100]kbit ceil ${DOWNLINK}kbit burst $BURST prio 2"
add_class "tc class add dev $IMQ parent 1:1 classid 1:30 htb rate $[$DOWNLINK*19/100]kbit ceil ${DOWNLINK}kbit burst $BURST prio 2"add_class "tc class add dev $IMQ parent 1:1 classid 1:40 htb rate 1kbit ceil $[8*$DOWNLINK/10]kbit burst $BURST prio 2"
add_qdisc "tc qdisc add dev $IMQ parent 1:10 handle 10: sfq perturb 10" add_qdisc "tc qdisc add dev $IMQ parent 1:20 handle 20: sfq perturb 10" add_qdisc "tc qdisc add dev $IMQ parent 1:30 handle 30: sfq perturb 10" add_qdisc "tc qdisc add dev $IMQ parent 1:40 handle 40: sfq perturb 10"
# Matches
U32="tc filter add dev $IMQ protocol ip parent 1:0 prio 1 u32"
msg "Adding EXTREMALY high priority DOWNLOAD trafic filters" for a in $CLASS1_REMOTE_PORTS
do
add_filter "$U32 match ip sport $a 0xffff flowid 1:10"
done
# ICMP (ip protocol 1) in the interactive class 1:10 so we
# can do measurements & impress our friends: add_filter "$U32 match ip protocol 1 0xff flowid 1:10"
msg "Adding other high priority DOWNLOAD trafic filters"
# TOS Minimum Delay (ssh, NOT scp) in 1:20 add_filter "$U32 match ip tos 0x10 0xff flowid 1:20"
# Source port ranges
for a in $CLASS2_REMOTE_PORTS
do
add_filter "$U32 match ip sport $a 0xffff flowid 1:20"
done
msg "Adding lowest priority uplink filters"
for a in $CLASS4_REMOTE_PORTS
do
add_filter "$U32 match ip sport $a 0xffff flowid 1:40"
done
for a in $CLASS4_LOCAL_PORTS
do
add_filter "$U32 match ip dport $a 0xffff flowid 1:40"
done
# prioritize small packets (<64 bytes) add_filter "$U32 match ip protocol 6 0xff \ match u8 0x05 0x0f at 0 \ match u16 0x0000 0xffc0 at 2 \ flowid 1:20"
msg "Filters by fw mark"
#add_filter "tc filter add dev $IMQ protocol ip pref 6 parent 1:0 handle 6 fw classid 1:10" add_filter "tc filter add dev $IMQ protocol ip pref 7 parent 1:0 handle 7 fw classid 1:20" add_filter "tc filter add dev $IMQ protocol ip pref 8 parent 1:0 handle 8 fw classid 1:30" add_filter "tc filter add dev $IMQ protocol ip pref 9 parent 1:0 handle 9 fw classid 1:40"
add_filter "$U32 match ip dst 0.0.0.0/0 flowid 1:30"
version htb & kernel
found what command gives this messages
why you use r2q
message: Jun 12 19:42:34 server kernel: HTB: quantum of class 10040 is small. Consider r2q change.<7>htb*g jv36248
only for debug
I also see it.
Try htb-3.6 if you use older version
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
seems you don't use latest version of htb ..
Quoted 29 lines · Tadas
Hello,
I have made every effort learning QoS. I chose HTB and wrote a script (attached to the message). The problem is error messages in syslog. They appear on heavy load. It looks like:
Jun 12 23:00:04 server kernel: KERNEL: assertion (delay > 0 && delay < 5000000) failed at sch_htb.c(411) Jun 12 23:00:41 server last message repeated 12 times Jun 12 23:01:42 server last message repeated 72 times Jun 12 23:02:43 server last message repeated 49 times Jun 12 23:03:51 server last message repeated 29 times Jun 12 23:04:52 server last message repeated 46 times Jun 12 23:05:02 server last message repeated 16 timesWhat does it mean?
There was another type of messages:
Jun 12 19:42:33 server kernel: htb*r0 m=0 Jun 12 19:42:34 server kernel: HTB: quantum of class 10040 is small. Consider r2q change.<7>htb*g jv36248 Jun 12 19:42:34 server kernel: htb*r7 m=0 Jun 12 19:42:34 server kernel: htb*r6 m=0 Jun 12 19:42:34 server kernel: htb*r5 m=0 Jun 12 19:42:34 server kernel: htb*r4 m=0 Jun 12 19:42:34 server kernel: htb*r3 m=0 Jun 12 19:42:34 server kernel: htb*r2 m=0 Jun 12 19:42:34 server kernel: htb*r1 m=0
Quoted 8 lines
but after I added "r2q 1" parameter to a htb qdisc, kernel started complaining with the message above.
Please help me or give some kind of hint.
Bye,
Tadas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/