IMQ test
Hi,
I am testing IMQ from few days. I have quite complex setup managing two external interfaces with many classes and over 350 users. IMQ works reliable and stable :)
I tried to experiment and to direct flow to IMQ I used rule in mangle table but in FORWARD chain like following:
$IPTABLES -t mangle -I FORWARD 1 -i $ext_if1 -o $internal_iface -j IMQ --todev 0
It works fine.
I also tried to direct local destined traffic via following rule to have opportunity to run some local services and not disturb shaping policy..
$IPTABLES -t mangle -A INPUT -i $external_iface -j IMQ --todev 0
I couldnt use PREROUTING to achieve this result due to my box is doing NAT and I have some classes/filters related to local destination IPs.
It looks that second [INPUT] chain have some impact on traffic shaping but it was very strange. Then I put that rule my interactive traffic becomes very poor [NAT box didnt generate any traffic itself]. Normal situation RTT was about 60ms but when launched rule in "-t mangle INPUT" average RTT jumped to 500 or even 1000 !
OK, thats all my report today :)
Going to play more with QL IMQ driver.
Regards
tw
--
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/