"HTB delay" log messges
hello,
What are those messages that I get in in /var/log/messages?
HTB delay 4058 > 5 sec
they go on and on, so that syslog even suppresses them.
Thnx,
Signature · 7 lines
Anton Yurchenko<[email protected]> Digital Generation _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
This only additional information, not error
If delay value not correct - delay<0 then delay=1 or delay>5*HZ then delay=5*HZ where HZ0 for intel
(I'm right Martin ???)
See source code of shc_htb.c:992 (htb-3.6)
Quoted 3 lines · Anton Yurchenko
What are those messages that I get in in
/var/log/messages? HTB delay 4058 > 5 sec
they go on and on, so that syslog even suppresses them.
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · Anton Yurchenko
hello,
What are those messages that I get in in
/var/log/messages?HTB delay 4058 > 5 sec
they go on and on, so that syslog even suppresses them.
I think it's fixed in a more recent release of htb.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · Stef Coene
Quoted 4 lines · Anton Yurchenko
hello,
What are those messages that I get in in
/var/log/messages?
Quoted 11 lines
Quoted 5 lines
HTB delay 4058 > 5 sec
they go on and on, so that syslog even suppresses them.
I think it's fixed in a more recent release of htb.
Stef
after some digging it came out to be, that if you try to shape to a rate LOTS less then the rate going through the class, then delay _to_be_introduced_ would be very large, that is more then 5 sec. That is what those msgs are all bout. Fix me if I`m wrong.
Signature · 8 lines
Anton Yurchenko<[email protected]> Digital Generation _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Well but they should be treated as config error. Probably there is class with ultralow rate or ceil
Quoted 19 lines · Alexey Talikov
This only additional information, not error
If delay value not correct - delay<0 then delay=1 or delay>5*HZ then delay=5*HZ where HZ0 for intel
(I'm right Martin ???)See source code of shc_htb.c:992 (htb-3.6)
Quoted 3 lines · Anton Yurchenko
What are those messages that I get in in
/var/log/messages? HTB delay 4058 > 5 sec
they go on and on, so that syslog even suppresses them.-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
Quoted 5 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines
Quoted 1 line
after some digging it came out to be, that if you try to shape to a rate LOTS less then the rate going through the class, then delay _to_be_introduced_ would be very large, that is more then 5 sec. That is what those msgs are all bout. Fix me if I`m wrong.
Good Stef :-))
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/