Skip to contentSkip to conversation

HZ to be 1000 - 2.5.25 may have this

LARTC bert hubert 5 participants 7 messages Jul 4, 2002 – Jul 10, 2002

lore
Share & tools
lore
#0 lore raw

From lwn.net:

The current development kernel remains 2.5.24. Linus has not released any kernels - or surfaced on the linux-kernel mailing list - since before OLS and the Kernel Summit. Some patches are beginning to show up in his BitKeeper tree, however; they include some SCSI updates, an NTFS update, and, interestingly, a change of the internal x86 clock frequency to 1000 Hz.

1000Hz would mean great things for us shaping people!

Also, on a related note, see this on 'firm timers':
http://www.cse.ogi.edu/~luca/firm.html
More on http://www.cse.ogi.edu/~ashvin/

Thanks for Erik Walthinsen for pointing this out .

Regards,

bert

Signature · 6 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 11 lines · bert hubert
Quoted 1 line

From lwn.net:

The current development kernel remains 2.5.24. Linus has not released any kernels - or surfaced on the linux-kernel mailing list - since before OLS and the Kernel Summit. Some patches are beginning to show up in his BitKeeper tree, however; they include some SCSI updates, an NTFS update, and, interestingly, a change of the internal x86 clock frequency to 1000 Hz.

1000Hz would mean great things for us shaping people!

Can this be done in 2.4.18 by changing HZ in include/asm-i386/param.h to 1000? Would anything else need to be changed, like CLOCKS_PER_SEC (also in param.h)?

Best regards,
Adam Fineberg
[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to bert hubert
Quoted 11 lines · Adam B. Fineberg
Quoted 9 lines · bert hubert
Quoted 1 line

From lwn.net:

The current development kernel remains 2.5.24. Linus has not released any kernels - or surfaced on the linux-kernel mailing list - since before OLS and the Kernel Summit. Some patches are beginning to show up in his BitKeeper tree, however; they include some SCSI updates, an NTFS update, and, interestingly, a change of the internal x86 clock frequency to 1000 Hz.

Quoted 7 lines
Quoted 3 lines

1000Hz would mean great things for us shaping people!

Can this be done in 2.4.18 by changing HZ in include/asm-i386/param.h to 1000? Would anything else need to be changed, like CLOCKS_PER_SEC (also in param.h)?

Try to download this url:
http://www.ibiblio.org/gentoo/distfiles/linux-gentoo-2.4.19-crypto-r7.patch.bz2

This is gentoo Linux patch to 2.4.18, which adds Low Latency Scheduling, Preemptible Kernel, rmap, Ingo Molnar o(1) scheduler and by default it has HZ equal to 1000. Also there is XFS, Grsec and lots of other usefull staff.

Patch is about 6.4Mbyte.
Luck.

Quoted 9 lines

Best regards,
Adam Fineberg
[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 5 lines
With Respect
Dmitriy Kuznetsov
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to bert hubert
Quoted 2 lines · Adam B. Fineberg

Can this be done in 2.4.18 by changing HZ in include/asm-i386/param.h to 1000?

Yes.

Quoted 2 lines

Would anything else need to be changed, like CLOCKS_PER_SEC (also in param.h)?

Hmm, CLOCKS_PER_SEC doesn't look right, particularly if you look at include/asm-ia64/ia32.h:IA32_CLOCKS_PER_SEC. It's only used for some obscure parameter-passing mechanism in ELF, so the damage should be quite limited. (I.e. I've never noticed anything going wrong when changing HZ, and I didn't realize the CLOCKS_PER_SEC dependency until now.)

- Werner

Signature · 6 lines
  _________________________________________________________________________
 / Werner Almesberger, Buenos Aires, Argentina         [email protected] /
/_http://icapeople.epfl.ch/almesber/_____________________________________/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#4 lore raw
In reply to bert hubert

Dmitriy,

I tried applying the patch you suggested
(http://www.ibiblio.org/gentoo/distfiles/linux-gentoo-2.4.19-crypto-r7.patch.bz2)
and after I sorted through a few things with the patching (since I already had a HTB) I tried a make xconfig and got the following:

rm -f include/asm
( cd include ; ln -sf asm-i386 asm)
make -C scripts kconfig.tk
make[1]: Entering directory `/usr/src/linux-2.4.18-WMUX-low-latency/scripts' cat header.tk >> ./kconfig.tk
./tkparse < ../arch/i386/config.in >> kconfig.tk
-: 309: can't handle dep_bool/dep_mbool/dep_tristate condition make[1]: *** [kconfig.tk] Error 1
make[1]: Leaving directory `/usr/src/linux-2.4.18-WMUX-low-latency/scripts'
make: *** [xconfig] Error 2

Any ideas how to proceed or who/where else I can ask?

Best regards,
Adam Fineberg

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#5 lore raw
In reply to bert hubert

HZ is set to 100 in that patch.. :>

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dmitriy
Sent: Wednesday, July 10, 2002 1:30 AM
To: [email protected]
Subject: Re: [LARTC] HZ to be 1000 - 2.5.25 may have this

Quoted 5 lines · Adam B. Fineberg
Quoted 3 lines · bert hubert
Quoted 1 line

From lwn.net:

The current development kernel remains 2.5.24. Linus has not released

any

Quoted 1 line
Quoted 1 line

kernels - or surfaced on the linux-kernel mailing list - since before

OLS

Quoted 2 lines
Quoted 2 lines

and the Kernel Summit. Some patches are beginning to show up in his BitKeeper tree, however; they include some SCSI updates, an NTFS

update,

Quoted 1 line
Quoted 1 line

and, interestingly, a change of the internal x86 clock frequency to

1000

Quoted 7 lines
Quoted 5 lines

Hz.

1000Hz would mean great things for us shaping people!

Can this be done in 2.4.18 by changing HZ in include/asm-i386/param.h

to

Quoted 1 line

1000? Would anything else need to be changed, like CLOCKS_PER_SEC

(also

Quoted 1 line

in param.h)?

Try to download this url:
http://www.ibiblio.org/gentoo/distfiles/linux-gentoo-2.4.19-crypto-r7.pa
tch.bz2

This is gentoo Linux patch to 2.4.18, which adds Low Latency Scheduling, Preemptible Kernel, rmap, Ingo Molnar o(1) scheduler and by default it has
HZ equal to 1000. Also there is XFS, Grsec and lots of other usefull staff.

Patch is about 6.4Mbyte.
Luck.

Quoted 9 lines

Best regards,
Adam Fineberg
[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 9 lines
With Respect
Dmitriy Kuznetsov
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/