Skip to contentSkip to conversation

Per-destination MTUs?

LARTC Michael T. Babcock 2 participants 3 messages Jul 4, 2002

lore
Share & tools
lore
#0 lore raw

I have some Path-MTU discovery problems it seems; a few sites I deal with can only communicate with us if we use an MTU of 1492 (they're on ADSL of course ...) and another (in Japan) only works for file transfers if we use an MTU of around 1425.

Is there any way to tell Linux what the MTU should be on a per-destination basis?

Signature · 6 lines
Michael T. Babcock
CTO. FibreSpeed Ltd.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 4 lines · Michael T. Babcock

I have some Path-MTU discovery problems it seems; a few sites I deal with can only communicate with us if we use an MTU of 1492 (they're on ADSL of course ...) and another (in Japan) only works for file transfers if we use an MTU of around 1425.

http://lartc.org/HOWTO//cvs/2.4routing/html/lartc.cookbook.mtu-discovery.html

Signature · 6 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Michael T. Babcock
Quoted 3 lines · bert hubert

http://lartc.org/HOWTO//cvs/2.4routing/html/lartc.cookbook.mtu-discovery.html

(Ignoring the fact that I should've looked there in the first place ...) thanks, it works exactly as desired (even on kernel 2.2.19, fwiw).

Signature · 6 lines
Michael T. Babcock
CTO, FibreSpeed Ltd.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/