Skip to contentSkip to conversation

dhclient

LARTC Alejandro Mery Pellegrini 2 participants 3 messages Jul 27, 2002 – Jul 28, 2002

lore
Share & tools
lore
#1 lore raw

hi :<

how do i write 'ifconfig eth1:0- init 0' in iproute2 sintaxis? and.... how does a route add -host looks like?

Please..... i really need your help.

Best Regards,
Alejandro Mery

----- Original Message -----
From: "Alejandro Mery Pellegrini" <[email protected]>
To: "NG LARTC" <[email protected]>
Sent: Friday, July 26, 2002 11:20 PM
Subject: [LARTC] dhclient

Quoted 11 lines

does anyone have dhclient-script (isc's dhcpc v3) for iproute2?

i have ported most of it, but how do i remove aliases with the ip command?

Best regards,
Alejandro Mery

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Alejandro Mery Pellegrini
Quoted 6 lines · Alejandro Mery Pellegrini

hi :<

how do i write 'ifconfig eth1:0- init 0' in iproute2 sintaxis? and.... how does a route add -host looks like?

Please..... i really need your help.

You don't have alias in iproute like you have with the old util ipconfig. ip link show : shows the devices
ip add show : shows the addresses
A NIC has multiple addresses. So you can have more then 1 address / NIC without having 1 primary and mutiple addresses. All addresses are equal.

Stef
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/