Skip to contentSkip to conversation

"For ethernet, no packet uses less than 64 bytes" - why?

LARTC Christian Hammers 1 participant 1 message Jul 28, 2002

lore
Share & tools
lore
#0 lore raw

Hi

Well, subject says all. In Chapter 9.2.2.1, TBF, the parameter mpu or "minimum packet size" is explained as:

Quoted 3 lines

A zero-sized packet does not use zero bandwidth. For ethernet, no packet uses less than 64 bytes. The Minimum Packet Unit determines the minimal token usage for a packet.

In my understanding an ethernet packet needs at least 14 (2*6+2) bytes or 54 bytes if there's an ip header present.

If this is a kernel issue it should be noted. To which layer does the term "zero-sized" apply anyway? I mean, how can I tell C to send "nothing"?

bye,

-christian-

Signature · 7 lines
Christian Hammers    WESTEND GmbH - Aachen und Dueren     Tel 0241/701333-0
[email protected]     Internet & Security for Professionals    Fax 0241/911879
          WESTEND ist CISCO Systems Partner - Authorized Reseller

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/